• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.75-76
• /
• 2001

산업적으로 강제 Swirl 유동은 난류를 촉진하기 위하여 많이 이용된다. 특히 Swirl유동은 난류 강도를 증가시켜 물질과 열의 전달 효과를 증진시켜 터빈 연소기, 열교환기 및 각종 산업용 버너 등의 공업분야에 폭넓게 이용되고 있다. Swirl강제 유동 발생 방법은 원추형 덕트방식, 베인형, 프로펠러형 등이 많이 이용되고 있으나 대부분의 방법은 강제로 와류(Swirl)를 발생, 촉진 및 증가 시키므로 유동손실 및 압력 손실 등을 수반하게 되어 많은 에너지 손실을 가져온다. (중략)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.86-94
• /
• 1987

In order to examine the flow motion in a combustion chamber of a motored diesel engine, the variation of instantaneous are velocity at a fixed point in combustion chamber was measured by the constant temperature hot wire anemometer, varing engine speed, shroud shape and shroud position. The results are summerized as follows: 1. The variation of air velocity in a combustion chamber is closely related with the valve timing and piston velocity. 2. The air velocity in the cylinder at suction stroke is being increased and maximized at 60$^{\circ}$ ABDC in compression stroke and then decreased at the e.v.o. in expansion stroke. 3. The mean velocity using shroud valve was less than no shroud valve. However the turbulent intensity using shroud valve was larger than no shroud valve. 4. The turbulent intensity with 90$^{\circ}$shroud valve was larger than that of 120$^{\circ}$shroud valve, and 90$^{\circ}$shroud valve at 180$^{\circ}$shroud position had the largest turbulent intensity.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.40-40
• /
• 1987

In order to examine the flow motion in a combustion chamber of a motored diesel engine, the variation of instantaneous are velocity at a fixed point in combustion chamber was measured by the constant temperature hot wire anemometer, varing engine speed, shroud shape and shroud position. The results are summerized as follows: 1. The variation of air velocity in a combustion chamber is closely related with the valve timing and piston velocity. 2. The air velocity in the cylinder at suction stroke is being increased and maximized at 60° ABDC in compression stroke and then decreased at the e.v.o. in expansion stroke. 3. The mean velocity using shroud valve was less than no shroud valve. However the turbulent intensity using shroud valve was larger than no shroud valve. 4. The turbulent intensity with 90°shroud valve was larger than that of 120°shroud valve, and 90°shroud valve at 180°shroud position had the largest turbulent intensity.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.729-732
• /
• 2010

The present study has been motivated by the development of a reliable numerical methodology for simulation of kerosene/LOx coaxial swirl injectors. To deal with thermodynamic non-ideality and anomalies of transport properties pronounced at supercritical pressures, a set of subroutine libraries has been constructed based on the cubic equations of state, and applied to an existing flamelet analysis code. For computational efficiency, two-dimensional axisymmetric RANS formulation with swirl was adopted and validated successfully against an isothermal coaxial swirling jet. For the actual problem with high pressure combustion, however, numerical results show that the RANS models yield excessive production of turbulence probably due to high density gradient magnitude in the vicinity of mixing layer of swirling film flow, and imply strongly further improvement of the turbulence models.

• Journal of the korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.7-16
• /
• 1979

Laser는 공간적 시간적 가간섭성이 매우 우수하며 단색성, 고출력, 단시간 Pulse등의 특성을 지 니고 있어서 각종의 계측, 통신, 가공, 정보처리, 의료, 농학 등의 다방면에 널리 응용되고 있으나 여기서는 Laser유족계에 대하여 설명하였다. 특히 지금까지 측정불가능하였던 연소현상에 대 해서도 LDV를 활용하여 좋은 연구결과를 얻을 수 있었으나 아직도 연소현상에 대한 LDV의 응용은 정치 Burner화염에 한정되어 있으며 앞으로도 많은 발전의 여지가 있는 부분이다. 그 중에서도 밀폐연소실내에서의 화염면전후의 유속계측, 전화화염의 화염전파속도, 연소속도 등에 관한 연구, 그리고 과도적으로 변동하는 유속, 화염온도, 연소실내 압력의 동시계측에 의한 각종 상관관계연구 및 난류화염유속의 계측 등금후 LDV를 이용한 실험의 발전이 매우 기대되는 바이다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.2
• /
• pp.9-17
• /
• 2002

For turbulent spray combustion flows a coupled numerical procedure was developed, This method was discretized by using generalized curvilinear coordinates to handle complex geometries. The preconditioning and eigenvalue rescaling techniques were employed to provide efficient convergences over a wide range of subsonic Mach numbers. The accuracy was validated by simulating the laminar cavity flow. The film cooling effect of a liquid rocket engine (KSR-III) were investigated by a spray combustion analysis. The film cooling showed a negative effect on the combustion efficiency. In the combustion chamber wall, the film cooling effect was revealed to be promoted by the production of fuel rich zone.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.460-466
• /
• 2010

단일 알루미늄의 연소 모델을 사용하여 알루미늄 분말의 점화 과정에 대한 전산유체 해석 기법을 개발하였다. 유동의 계산은 Reynolds averaged Navier-Stokes식을 사용하였으며, $k-{\epsilon}$ 난류모델을 적용하였다. 입자는 Eulerian-Lagrangian 방법을 사용하여 유동과 독립적으로 계산을 수행하였으며 상용 전산유체해석 프로그램인 Fluent 6.3을 사용하여 해석을 수행하였다. 단일 모델에서 사용한 대류 및 복사 열전달, 표면이상반응, 알루미늄의 용융열을 입자 가열원으로 고려하였다. 같은 조건을 사용하여 단일 입자 모델 계산과 전산유체해석을 수행하였으며, 두 결과는 5% 이내로 잘 일치 하였다. 이를 통해 전산유체해석에서 알루미늄의 점화를 모사할 수 있음을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.367-375
• /
• 1986

On the hypothesis that the unstable intermediates yield by the pre-reaction of auxiliary fuel become an initiator or an explosive center which promotes the chain reaction of main fuel, various organic compounds below $C_{10}$ are injected as an auxiliary fuel prior to main injection. In the previous papers, the effects of the auxiliary fuel additions on the ignition delay period, the stability of flame, the NO concentrations in their exhaust gases have been investigated. In the present paper, to confirm where the most suitable location of lean pre-mixture for the combustion of main fuel is, and how the lean pre-mixture is contacted with main fuel, the effects of the injection timing of auxiliary fuel and the turbulence on combustion processes are investigated. Moreover, from the schlieren and color photographs of flame in the combution field, it could be found that the ignition nuclei are formed in a wider region of main spray, and that these ignition nuclei promote the development of flame, which results in the reduction of flaming duration.

• Fire Science and Engineering
• /
• v.32 no.5
• /
• pp.15-21
• /
• 2018

This study examined the growth characteristics and carbonization pattern when a fire occurs due to a flammable liquid sprinkled on a vinyl floor. When acetone was sprinkled on a floor, the flame reached its peak in approximately 0.2 s after it was ignited. The lower part of the flame showed a laminar pattern while the upper part showed a turbulent pattern. The pattern showed a turbulent pattern and generated white smoke. The combustion completed floor surface showed carbonization of a dim pore pattern. In the case of benzene, an intense flame was formed in approximately 0.6 s after ignition. The flame length was measured to be approximately 50 mm. When the flame became weak, a significant amount of black smoke was generated due to incomplete combustion. The combustion completed floor surface showed carbonization of a pour pattern and splash pattern. In the case of alcohol, an intense flame was formed in approximately 1.1 s after ignition. In addition, the depth of carbonization was significant where the flammable liquid was collected and a trace of carbonization was observed at the boundary of the flow path of the flammable liquid.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.70-79
• /
• 2013

The isothermal flow structure and mixing characteristics of a hybrid/dual swirl jet combustor for micro-gas turbine (MGT) were numerically investigated. Location of pilot burner, swirl angle and direction were varied as main parameters with the identical thermal load. As a result, the variations in location of pilot nozzle, swirl angle and direction resulted in the significant change in turbulent flow field near burner exit, in particular, center toroidal recirculation zone (CTRZ) as well as turbulent intensity, and thus the flame stability and emission performance might be significantly changed. With the comparison of experimental results, the case of swirl angle $45^{\circ}$ and co-swirl flow including optimum location of pilot burner were chosen in terms of the flame stability and emissions for the development of hybrid/dual swirl jet combustor.