• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.2
• /
• pp.193-200
• /
• 2009

This paper investigated the drop characteristics of oleo pneumatic type landing gear for small aircraft and the effects of cavitations in modeling the landing gear system. The landing gear system employed a simple oleo pneumatic type damper without a metering pin. In general, oleo-pneumatic type landing gears are light-weighted because of it's simplicity, yet they offer excellent impact absorption characteristics. In this study, the landing gear system was modeled using MSC ADAMS, which offers a drop simulation module. After modeling the system, a series of testing was conducted, using a prototype landing gear system, to validate the analysis model and simulation results. The effect of cavitation was considered in the simulation model to obtain a better correlation between the test and simulation results. The results show that adding the cavitation effect in the simulation model significantly improved the simulation model and better captured the dynamic behaviors of the landing system. Using the 'cavitation' model, dynamics characteristics of the landing gear were further evaluated for other landing conditions, such as landing in various angles of slopes.

• Tunnel and Underground Space
• /
• v.20 no.5
• /
• pp.360-368
• /
• 2010

The paper presents a case study from a surface mine where the controlled augmentation of throw and drop of the blasted muck piles was warranted to spread the muck piles on the lower berm of the bench. While the augmentation of throw increased the lateral spread and the looseness of the broken muck, the augmentation of drop significantly lowered the muck pile height for easy excavation by the excavators. In this light, the present paper highlights and discusses some pertinent changes in the blast design parameters for such specialized application of cast blasting in a surface mine, where a sandstone bench, with average height of 22-24 m was to be made amenable for excavation by 10 m3 rope shovels, which possessed maximum digging capability of up to 14 m. The results of tailoring the blast design parameters for augmentation of throw and drop are compared with the baseline blasts which were earlier practiced on the same bench by dividing the full height of the bench in 2-slices; upper slice (10-14 m high) and lower slice (12-15 m high). Results of fragment size, its distribution and total cycle time of excavator (shovel) are presented, and discussed.

• 한국노년학
• /
• v.38 no.1
• /
• pp.203-223
• /
• 2018

This study examined the validity and the reliability of the perceived elderly stigma scale. Moreover, we investigated the relationships between the perceived elderly stigma and demographic factors (age, gender, education, and income). The initial scale consisted of 5 factors (ability, personality, appearance, authoritarian dependency, and child-obsession) and 28 items. In order to test the validity and the reliability of the scale, this study conducted a survey with 693 adults aged 18 to 65. Based on the confirmatory factor analysis (CFA), the scale was modified to 5 factors (ability, personality, appearance, authoritarian dependency, and child-obsession) and 15 items and its convergent validity and discriminant validity were confirmed. In terms of the relationships between the perceived elderly stigma and demographic factors, age had a negative relationship with the "ability" stigma, and education was a negatively associated with the "appearance" stigma.

• The Journal of Korean Philosophical History
• /
• no.50
• /
• pp.139-169
• /
• 2016

Nakron School of the ruling Noron Party in late Joseon Dynasty was at the helm of state with Neo-Confucian ideology and it came out of being obsessed with conventional 'spiritual' aspects and changed both political and academic atmosphere with interests in 'matters.' The power leading such a change was scholars in Seoksil Seowon (石室書院) which centered around Kim Won-Haeng (金元行). However, except for few progressive scholars-Bukhak scholars (北學論者), most of Nakron scholars secretly acknowledged the actuality of Qing Dynasty but they failed to get out of old Neo-Confucian traditions. It was difficult for them to accept Bukhak theory which jeopardized the existence of administration. They sought plans both to keep Neo-Confucian traditions and Sinocentrism in Joseon and to reach the cultural level of Qing Dynasty and in that process, they recognized restoration of the statecraft study (經世學) summarized on Seongridaejeon as an alternative. Hwang Yun-Seok is a representative Neo-Confucian scholar in such response of Nakron. He rediscovered value of the science of xiangshu in the Neo-Confucian category and highlighted importance of Seongridaejeon yet again.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.2
• /
• pp.211-222
• /
• 2011

In this paper a structural analysis of the PWR(pressurized water reactor) canister with 102cm diameter is carried out to evaluate the structural safety of the canister for the impact force occurring at the moment of collision with the ground in the falling plumb down accident from the carriage vehicle which may happen during the canister handling at the spent nuclear fuel disposal repository. For this, a rigid body dynamic analysis of the canister is executed to compute the impact force using the commercial CAE system, RecurDyn, and a nonlinear structural analysis is performed to compute stresses and deformations occurring inside the canister for this computed impact force using the commercial FEM code, NISA. From these analysis results, the structural safety of the canister is evaluated for the falling plumb down accident from the carriage vehicle due to the inattention during the canister handling at the repository. The rigid body dynamic analysis performed assuming the canister as a rigid body shows that the canister falls plumb down to the ground in two types. And also it shows that early collision impact force is the biggest one and following impact forces decrease gradually. The height of the carriage vehicle in the repository is assumed as 5m in order to obtain the stable structural safety evaluation result. The nonlinear structural analysis of the canister is executed for the biggest early impact force. The structural analysis result of the canister shows that the structural safety of the PWR canister is not secured for the falling plumb down accident from the moving carriage vehicle because the maximum stresses occurring in the cast iron insert of canister are bigger than the yield stress of the cast iron.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.117-123
• /
• 2005

This paper deals with the finite element model of the monitor fur the simulation of directional free drop tests such as the backward and vertex free drop as well as the associated free-drop experiment. The model was made for an unconditional stable solution fur the explicit integration algorithm. It was found through the comparison between simulation and experimental results that the general behaviors at the time of impact were observed to well correlate with each other in terms of acceleration, displacement, contact force and stress of monitor components.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.655-656
• /
• 2004

1) 제어봉의 전자 클러치는 직류전원 공급 장치에 의해 12V의 직류 전력을 공급받으며 전압 강하에 대한 내성이 좋다. 제어봉은 10V의 전압이 525msec 이상 지속될 때 전자력 상실로 낙하한다. 완전정전(0V)이 발생하여도 직류전원 공급 장치는 500msec 동안 전자클러치에 직류전력을 공급하여 제어봉의 연결 상태를 유지하도록 한다. 2) 정지봉 계통에 대한 전압강하의 영향은 제어회로를 구성하는 전자접촉기의 개방에 의하여 펌프의 전원공급이 차단되고, 그 결과 정지봉이 낙하한다. 정지봉은 펌프의 전원이 상실되면 수압 실린더의 압력 상실로 약 1000msec 후에 낙하한기 시작한다. 그림 2는 제어봉 및 정지봉에 대한 정전 영향을 시간에 따라 표시한 것이다. 3) 1차 및 2차 냉각계통의 부족전압 계전기에 의해 펌프가 정지할 때까지 저유량 신호 및 N/T mismatch 신호에 의한 원자로 정지신호는 발생되지 않는다. 따라서 정지봉 및 제어봉 계통에 적용하고자 하는 순간정전 보상장치는 부족전압 계전기 동작시간 이내의 보상시간에서만 가능할 것이다.

• Journal of the Korean Society of Safety
• /
• v.6 no.2
• /
• pp.37-40
• /
• 1991

산업용 안전모는 그 기능상 耐貫通性과 衝擊吸收性이 중요하다. 이중내관통성은 별로 어려움이 없으나 충격흡수성은 무게 및 크기가 제한되고 극히 간단한 안전모의 구조에 충격을 충분히 흡수하는 Bumper작용까지 하여야 하므로 기준에 합격할수 있는 안전모를 제작하기 위하여는 여간 어려운게 아니다. 이에 論者는 일정한 무게의 추가 일정한 높이에서 자유낙하하여 안전모에 충격을 加하고서 반발할때까지의 안전모의 수직운동(변형)이 어느정도 이루어저야 하는지에 대하여 관심을 갖었다. 즉 모체든 착장체든 또는 모체와 착장체의 연결장소에서든 일정한 충격량을 받았을때 모체의정점(낙하물과 최초로 접한부분)이 수직으로 S'의 거리 만큼 움직여 주고 운동이 정지된다고 보았을때 S'과 m(추의중량), S(추가 떨어지는 높이) Fi(충격이 흡수되고 남은 충격력)와의 관계식을 뉴톤의 운동법칙으로 부터 수학적 방법으로 유도 함으로서 시험조건 및 검정 기준에 주어진 수치인 m, S, Fi,을 대입하므로서 S'을 알 수 있는바 이것을 기초로 안전모의설계및 제조된 안전모의 충격흡수 정도를 용이하게 판단 할 수있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.10
• /
• pp.99-108
• /
• 2007

As the structure of a mobile phone becomes thin to catch up with a slim product trend, the reliability of a LCD module is on the rise as a big issue for a product design. A drop test is the most basic and important verification method for a mechanical quality control but it requires much time and cost during a product development process. Thus many manufacturers have considered design guide lines using CAE and simulation for more effective usage of limited resources on the market. In this paper, the Maximum Principle Stress of a LCD glass panel is calculated on the basis of explicit FE Analyses method and input conditions are determined according to the general test standard. The design guideline for reliability improvements are suggested on the basis of the results of FE Analysis.

• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.391-394
• /
• 2000

Girdling and girdling+pinching treatments on 'Sekaiichi' apple remarkably reduced June drop and accelerated fruit growth in early stage of fruit development. Girdling+pinching and pinching reduced bourse shoot growth compared with non-treated control. There were no significant differences in flower bud formation in the following year among treatments. It was assumed that the optimum period for girdling is between 5 days before full bloom and full bloom period.