• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.630-634
• /
• 2009

"Hyedang", a new covered cultivar derived from the crosses between "Suwon300" and "Haganemugi//CI08397/Haganemugi" developed at the Honam Agricultural Research Institute (HARI), NICS, RDA in 2007. The origin of "Hyedang" is "Iksan 407" (SB951033-B-B-B-72). The initial cross was made in 1995 and the selected line showed a high yield and good quality characteristics under yield trial test in 2004. "Iksan407" consistently performed well for three years (2005-2007) from the four locations of regional yield trial (RYT) in Korea and released as "Hyedang". The characteristics of "Hyedang" were the following: rate III growth habit, green leaf and stem, compact spike and with long rough awns. The heading date was April 25 in upland and April 17 in paddy field, which was 2 and 3 days earlier than that of check cultivar, "Olbori". The culm length was 80 cm which was 8 cm shorter than those of check cultivar. It showed spike length of 4.3 cm and 696 spikes per $m^2$, 51 grains per spike, 35.0 g of 1,000 grain weight and 704 g of test weight. It showed stronger winter hardiness and higher resistance to barley yellow mosaic virus (BaYMV) than those with check cultivar. It showed similar protein content and higher whiteness than those of the check cultivar and diastatic power was higher than that of Olbori. The average yield of the pearled grain in the RYT was $4.17ton\;ha^{-1}$ in upland and $4.27ton\;ha^{-1}$ in paddy field, which was 23% and 9% higher than that of the check cultivar, respectively. This cultivar would be suitable for the area above the daily minimum mean temperature of $-8^{\circ}C$ in January in Korean peninsula.

• Korean Journal of Breeding Science
• /
• v.43 no.3
• /
• pp.184-189
• /
• 2011

'Younghan' (Hordeum vulgare L.), a winter barley for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute of Crop Science, Rural Development Administration in 2008. It was derived from a cross between $F_1$['YB3433-3B-5'/'YB3135-3B-2-3'] and 'YB3135-3B-2-3'. 'SB971305-B-B-B-4-4' line was selected for its earliness, resistance to disease and good agronomic characteristics. The promising line showed both high yield and lodging resistance in the yield trials in Iksan in 2004 to 2005, and designated as 'Iksan420'. The line was subsequently evaluated for winter hardiness, earliness, and yield at eight locations throughout Korea for two years from 2007 to 2008 and finally named as 'Younghan'. It has the growth habit of IV, erect plant type, green leaf and thick culm in diameter. Its heading date was April 24, and the maturing date was May 25 in paddy field conditions, which were one day earlier than those of the check cultivar 'Youngyang'. The cultivar 'Younghan' had better winter hardiness, and resistance to lodging and BaYMV than those of the check cultivar did. The average forage dry matter yield of 'Younghan' was approximately 12.0 MT/ha in adapted region. 'Younghan' also showed 8.5% of crude protein content, 27.2% of ADF, and 67.1% of TDN, including higher grade of silage quality for whole crop barley. This cultivar would be suitable for (area with daily minimum temperature in January) above $-8^{\circ}C$ in Korean peninsula.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.3
• /
• pp.168-173
• /
• 2008

This study was conducted to determine biological characteristics of Acorus calamus L. angustatus by using aqueous, ethanol and methanol extracts from the leaves and the rhizomes of Acorus calamus L. angustatus plants. The highest total phenol contents were found in the extracts from the leaves of Acorus calamus L. angustatus ($68.4mg{\cdot}L^{-1}$) followed by rhizome ($49.3mg{\cdot}L^{-1}$). At $1,000mg{\cdot}L^{-1}$ the free radical scavenging activity of 1, 1-Diphenyl-2-picrylhydrazyl showed the highest activity in the extracts of the leaves and the rhizomes by 86.3% and 86.1%, respectively. Total flavonoid contents at $2,000mg{\cdot}L^{-1}$ extracts showed the greatest amount in the aqueous leaf extracts ($61.1mg{\cdot}L^{-1}$), and the ethanol rhizome extracts ($15.4mg{\cdot}L^{-1}$). Nitrite radical scavenging activity at $2,000mg{\cdot}L^{-1}$ was highest in the methanol extracts from leaves and rhizomes by 75.7% and 77.9%, respectively. Mushroom tyrosinase inhibition activity of leaves and rhizome from the Acorus calamus L. angustatus was very low, showing less than 1.3% regardless of the extract solvent, plant part, and concentration. These results indicated that methanol extracts from leaves exhibited higher biological activities than other extracts from rhizomes.

• Journal of Legislation Research
• /
• no.44
• /
• pp.283-314
• /
• 2013

Das koreanische Verwaltungsprozessgesetz (KVwPG) wurde am 24. 8. 1951 kodifiziert. Es hat bisher mehrmals $ge{\ddot{a}}ndert$. Der Regierungsentwurf des KVwPG-${\ddot{A}}nderungsgesetzes$ vom 30. 3. 2013, ist fast $drei{\ss}ig$ jahre nach der Novellierung des KVwPGs 1984 erfolgt und auch spiegelt sich die Erfolge der $Bem{\ddot{u}}hungen$ in Literatur und Rechtsprechung wider. Aber es gibt nicht nur einige Unterschiede zwischen dem Regierungsentwurf und dem Entwurf der Kommission des Justizministeriums zur ${\ddot{A}}nderung$ des KVwPG (dem sog. Kommissionsentwurf), sondern auch der Regierungsentwurf ist theoretisch nicht problemlos. Vor allem sind Begriff und Umfang der neuen Klagebefugnis nicht klar. Des weiteren sind in ${\S}$ 12 des Regierungsentwurfs die Klagebefugnis mit dem $Rechtsschutzbed{\ddot{u}}rfnis$ identisch gesehen. Der $Rechtsschutzbed{\ddot{u}}rfnis$ nach ${\S}$ 12 Satz 2 des Regierungsentwurfs kann aus meiner Sicht relativ eng ausgelegt. Die $Einf{\ddot{u}}hrung$ der Verpflichtugnsklage in den Regierungsentwurf ist sehr gut, aber es kann trotzdem als problematisch angesehen werden dass Feststellungsklage der Rechtswidrigkeit der Unterlassung und Anfechtungsklage gegen Ablehnung bestehen noch. Der Begriff der Unterlassung ist $unn{\ddot{o}}tig$ und auch strikt. $Vorl{\ddot{a}}ugier$ Rechtsschutz des Regierungsentwurfs ist unter dem Gesichtpunkt der Rechtsschutz der $B{\ddot{u}}rger$ noch zu verbessern, aber doch das Modell des japanischen Verwaltungsprozessgesetzes darf nicht befolgt werden. Aufbau und System des $vorl{\ddot{a}}ufigen$ Rechtsschutzes sind auch nicht eindeutig. Nach Gegenstand und Klageart muss das Institut des $vorl{\ddot{a}}ufigen$ Rechtsschutzes in Ordnung gebracht werden. Es ist nicht ${\ddot{u}}berzeugend$ dass die $Einw{\ddot{a}}nde$ gegen die $Einf{\ddot{u}}hrung$ der vorbeugenden Unterlassung mit dem Gewaltenteilungsprinzip und der $Eigenst{\ddot{a}}ndigkeit$ der Verwaltung erhoben sind. $Dar{\ddot{u}}ber$ hinaus ist ADR (Alternative Dispute Resolution) zu beachten. In Bezug darauf ist Rechtgrundlage $f{\ddot{u}}r$ Mediation in der Verwaltungsgerichtsbarkeit zu stellen.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.246-259
• /
• 2021

Research has been conducted in various fields on a local fortress (eupseong) in the Joseon Dynasty, but the archaeological research on the prison (獄), which is part of the internal government, has not been conducted properly. Since the prison was first discovered in Gyeongju in 1997, there has been a necessity for research on the deployment and structure of the prison. This includes the office where jailers worked and had night duty and also the enclosure that keeps the prisoners inside. But the research came to a standstill because there was no comparative data. However, compared to the more recent findings of the Yeonil Prison and the Gonju Prison, we can identify that the structure was built during the early to the late Joseon Dynasty. King Sejong designed the standard prison blueprint called Anokdo (犴獄圖) in 1426 to manage prisoners nationwide and revised it once in 1439 to give better treatment during the winter and summer seasons. The Yeonil Prison operated from 1421 to 1743 and shows the structure of the prisons during the early to mid-Joseon period. It was very similar to the Gyeongju Prison on a smaller scale, which was operated until the late Joseon Dynasty with two main structures, one east and one west, and a circular fence. This structure was maintained even in the Gongju Prison during the late Joseon Dynasty, and it remains visible in photographs. The prison of the Joseon Dynasty had a circular fence with an estimated height of 3 meters and two buildings that separated male and female prisoners. The prison was divided into men on the east and women on the west with tile-roofed house structures that were difficult to escape. In front of the circular fence, there was an office with a thatched roof for the jailers and access to the prison was only possible through a double prison gate. The layout of the building reflects the improvements of the king's prison design made during Joseon Dynasty improving the environment of prisoners who are on trial and separating men and women in order to embody humanism.

• Korean Journal of Breeding Science
• /
• v.43 no.3
• /
• pp.190-195
• /
• 2011

'Youho' (Hordeum vulgare L.), a new ruminant-palatable forage barley cultivar, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute of Crop Science, RDA in 2008. It was derived from the cross between 'Suwon339' and 'Suwon355'. Among the cross made in 1999, a promising line, SB992047-B-B-B-6-2, showed good characteristics in potential forage yield in the yield trial tested at Iksan from 2005 to 2006. In 2007, it was designated as 'Iksan431' and placed in regional yield trials at eight locations in Korea for two years from 2007 to 2008, and was released as the name of 'Youho'. It has the growth habit of group II, erect plant type, green leaf and hood spike. Its average heading and maturing dates were on Apr. 24 and May 26, respectively, which are similar to check cultivar 'Yuyeon'. 'Youho' also showed weaker winter hardiness, but better resistance to lodging, shattering and BaYMV than those of check cultivar. It showed higher crude protein content, grade of silage quality than those of check cultivar. The average forage dry matter yield in the regional yield trial was about 14.1, $10.9MT\;ha^{-1}$ in upland and paddy field, respectively, which were 1% to 4% lower than that of the check cultivar. This cultivar would be suitable for the area whose daily minimum temperature was above $-8^{\circ}C$ in January in Korean peninsula.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.116-133
• /
• 2014

The memorial stones of Sumanotap were known to have been sequentially produced in 1719, 1773, 1874, 1653, 1874. However, after examining the chronological era (年號) and sexagesimal cycle (干支), it was found that the second and fourth memorial stones were both recorded in 1713. The reason why the records of the same period were divided into two is assumed that since the subject to repair was divided into main structure and flagpole of the temple, and it was recorded per each monk in charge and donator. On the fifth tablet of the memorial stone of Sumanotap contains all the names of monks who were in charge of repairing Sumanotap as well as the names of common donators. These people are not verified in detail though, through comparing the Buddhist names on the third memorial stone with Buddhist paintings and painting records, 12 monks were identified to be in the same names. Generally, they were active in Gangwon province, Gyeongsang province, Seoul and Gyeonggi province in the late 19th century and even after the Sumanotap repair, they took up other duties of various temples. The most notable name among the donators recorded in the memorial stones of Sumanotap was Kim Jwageun. He was the donator for the chest of gold and silver that was enshrined in the pagoda in 1874. His name was recorded with Mrs. Yang from Cheongsin and, at that time, was known just as a donator. However, actually, the donator was not Kim Jwageun but his mistress Mrs. Yang who used to be a gisaeng, called Na-hap and was from Naju. Kim Jwageun deceased in 1869 already. It is exceptional that Mrs. Yang who were the mistress of the prime minister Kim Jwageun personally participated in the Buddhist event in which king, queen, mothers of king and queen, noblewoman participated. Besides, the event of Sumanotap repair was carried out by royal family in order to celebrate the hundredth day of the prince, Sunjong and his grandfather, Heungseon Daewongun did not participate for political reason. In this situation, the domination of Mrs. Yang is considered remarkable. Meanwhile, the temples that frequently appeared among the 10 temples recorded in the memorial stone of Sumanotap are Gakhwa-sa temple in Bonghwa-gun, Gyeongsangbuk-do and Bodeok-sa temple in Yeongwolgun, Gangwon-do. Gakhwa-sa temple was a temple where the historical achievements were kept so was under the government's control. Bodeok-sa temple was the buddhist temple praying for the soul of the Danjong buried in the tomb and was managed by the government. Therefore, the face these two temples participated in the Sumanotap repair proves that Sumanotap was repaired by the supports form these two temples and the stature of Sumanotap at that time was as high as the temples where the historical achievements are store or the royal buddhist temples for praying for ancestors' souls.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.134-151
• /
• 2014

This paper deals with a review of the structure and production techniques of the Dried-lacquer Amitabha Buddha statue enshrined in Geungnakjeon Hall of Simhyangsa Temple, located in Daeho-dong, Naju-si, Jeollanam-do, Korea. To achieve this goal, X-ray date and two rounds of field research were performed. The data collected were reviewed, and a sample peeled off from the damaged part was analyzed to investigate the structure and material of the background layer. The results revealed that the Simhyangsa Temple Buddha statue was an almost empty Dried-lacquer(Hyeopjeo) Buddha statue where wood core had not been framed and inserted in the statue. It was thus observed that considering that the clothes wrinkles clearly remained, the same one as the irregularity of the outer clothes wrinkles, the Dried-lacquer layer was lifted made in an almost complete shape in the process of forming the clay figure as the origin form. The statue was found to be diagonally incised from the top of the head to the back of the neck to remove the clay and wood core. But in other sites, no incision was confirmed. It was observed that on the site of the head where the incision was made, an adhesives(lacquer or paste) was used. In addition, the black eyes were impacted with beads and the ears, hands, bands, and knots were made of wood. These features are identically shown in the Dried-lacquer Amitabha Buddha statue from Seonguksa Temple, known as a work of the late Goryeo dynasty; the Seated Dried-lacquer Buddha statue in Okura Museum of Art in Tokyo, Japan; the Seated Dried-lacquer Amitabha Buddha statue from Jungnimsa Temple, know as a work of the early Joseon dynasty; and the Seated Vairocana Buddha statue in Bulhoesa Temple, the Seated Dried-lacquer Amitabha Buddha and the Seated Dried-lacquer Buddha statue from Silsangsa Temple. The analysis of the back layer demonstrated that the ground layer and the red lacquer were the production of the time. In particular, the bone ash used for the ground layer was also coated for the ground layer of Buddha statues as well as for the production of the lacquerware during the Goryeo dynasty. It was also found that gold mending was conducted more than twice even in modern times and that the layer of the production time was well preserved despite gold mending several times.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.1
• /
• pp.18-41
• /
• 2017

The Gangjin WolnamSaji(月南寺址) is a small site where three-story pagodas and a destroyed tombstone remained. In 1973, it was discovered that the destroyed tombstone was that of the second master of Susunsa, Hye shim(慧諶), who had a special relationship with the military regime in Goryeo, and it once again attracted attention as a result of the recent excavation of the Rooftile of Yeonhwamun(蓮花文). In particular, the Windchime excavated in 2012 is a large-sized one group with a length of 23cm, and a relatively large Sanskrit character was decorated on four sides of the body. In addition, it was also confirmed in preservation process that the word 'gaecheon(盖天)' was engraved. The Sanskrit characters(梵字) om( , oṃ), a( , a), hum( , hūṃ), brum( , bhrūṃ) were decorated on the body of the Wind-chime excavated in WolnamSaji. Om( , oṃ), a( , a), hum( , hūṃ) are known as the Sammiljineon(三密眞言) and brum( , bhrūṃ) has the meaning of having the highest honor. In addition, the Sammiljineon(三密眞言) allows us to understand the truth by responding to the principle of universe, which is the Vairocana Buddha(毘盧遮那佛), and brum( , bhrūṃ) has the meaning of unity. In the end, the meaning of the Sanskrit decorating the four sides of the Wind-chime, of WolnamSaji(月南寺址), can be interpreted as the expression of the Buddha's doctrine, or the willingness to be combined with Buddha, the highest existence in itself. It is possible that the word 'gaecheon(盖天)' carved on the body can be regarded as the name of the master craftsman related to the making of the Wind-chime, but it is unlikely that it is the name of the master craftsman, considering that it is a place where the location is not easily seen. If so, you can think of the original function that the Wind-chime has. In other words, it can be interpreted symbolically and implicitly that the wish of the sound of the airwaves symbolized by the words of the Buddha covers the sky and spreads all over the place. It is thought that the Wind-chime excavated in WolnamSaji(月南寺址) was made in the mid to late 13th century considering the comparisons with another wind-chime excavated from the temple site, the historical situation in the late Goryeo, the publication date of the scriptures(經典) of Esoteric Buddhism(密敎).

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.208-227
• /
• 2013

Twenty-seven bronze bowls excavated from the Goryo burial complex at Deobu-gol were examined for their microstructure and chemical composition to characterize the bronze technology practiced by commoners at the time. Results showed that the objects examined can be classified into four groups: 1) objects forged out of Cu-near 22%Sn alloys and then quenched; 2) objects cast from Cu-below 10% Sn alloys containing lead; 3) objects cast from Cu-10%~20% Sn alloys containing lead and then quenched; 4) objects forged out of Cu-10~20% Sn alloys containing lead and then quenched. This study revealed that the fabrication technique as determined by alloy compositions plays an important role in bronze technology. The use of lead was clearly associated with the selection of quenching temperatures, the character of inclusions and the color characteristics of bronze surfaces. It was found that the objects containing lead were quenched at temperatures of $520^{\circ}{\sim}586^{\circ}C$ while those without lead were quenched at the range of $586^{\circ}{\sim}799^{\circ}C$. The presence of selenium in impurity inclusions was detected only in alloys containing lead, suggesting that the raw materials, Cu and Sn, used in making the lead-free alloys for the first group were carefully selected from those smelted using ores without lead contamination. Furthermore, the addition of lead was found to have significant effects on the color characteristics of the surface of bronze alloys when they are subjected to corrosion during interment. In leaded alloys, corrosion turns the surface light green or dark green while in unleaded alloys, corrosion turns the surface dark brown or black. It was found that in fabrication, the wall thickness of the bronze bowls varies depending on the application of quenching; most of the quenched objects have walls 1mm thick or below while those without quenching have walls 1mm thick or above. Fabrication techniques in bronze making usually reflect social environments of a community. It is likely that in the late Goryo period, experiencing lack of skilled bronze workers, the increased demand for bronze was met in two ways; by the use of chief lead instead of expensive tin and by the use of casting suitable for mass production. The above results show that the Goryo bronze workers tried to overcome such a resource-limited environment through technological innovations as apparent in the use of varying fabrication techniques for different alloys. Recently, numerous bronze objects are excavated and available for investigation. This study shows that with the use of proper analytical techniques they can serve as a valuable source of information required for the characterization of the associated technology as well as the social environment leading to the establishment of such technology.