• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1039-1044
• /
• 2014

Many research works have been conducted to improve a lubrication performance on diesel engines working in severe conditions. In this study the lubricant containing diamond nano-powder is applied on a diesel engine, and the engine performance is analyzed. The concentration of nano-diamond lubricant fabricated by the matrix synthesis dispersion method is varied. The test results with the nano lubricants are compared with the base oil. The result shows the improvement of efficiency with friction reduction and exhaust emissions reduction of CO, smoke and so on.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.1059-1062
• /
• 2009

폭발법에 의하여 얻어진 나노다이아몬드는 흑연상의 탄소를 일정 부분 갖으면서도 천연다이아몬드와 유사하게 높은 경도와 내마모 특성을 갖는 것으로 알려져 있으며, 흑연은 고온에 견디는 고체 윤활제로 사용되어 왔다. 따라서 나노다이아몬드를 오일과 물에 첨가하면서 용액의 점도 변화와 윤활 특성을 조사하였다. Fig. 2와 같이 3%(w/v)까지는 점도가 선형적으로 증가하는 것으로 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.4
• /
• pp.514-521
• /
• 2008

Many research works for improving a boundary lubrication performance have been executed by using solid lubricants, and been tried to apply an engine lubrication. However those general lubricants have not been applied on engines due to the extreme conditions such as very high temperature and pressure during combustion process in a cylinder. In this study a lubricant containing copper alloy nano-powder is applied on a diesel engine driven by an electric motor. Torques and shaft vibrations are measured, then an engine friction loss and rotating stability are assessed. The results show that the frequency of the vibration is about the same as that of a general lubricant, but the amplitudes in the both X and Y direction are reduced as well as the friction loss is reduced.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.269-269
• /
• 2010

$SnO_2$ 나노선은 n-type의 전기적 특성과 우수한 광 특성을 보이며, 전자소자, 광소자 뿐 아니라 다양한 종류의 가스 센서 등에 응용되고 있다. 그러나 $SnO_2$ 나노선은 공기중에서 전기적으로 불안정한 특성을 보이며, 도핑을 하지 않은 나노선 소자에서는 전자의 모빌러티가 높지 않다는 단점을 갖고 있다. 이를 개선하고자 본 연구에서는 화학기상증착법 (Chemical Vapor Deposition)으로 Sb을 도핑한 $SnO_2$ 나노선을 성장하여 전계방출효과 트랜지스터 (field effect transistor: FET)를 제작하여 전기적 특성과 UV 반응성의 변화를 측정하였다. Sb 도핑 양을 늘려감에 따라 전기적 특성이 반도체 특성에서 점점 금속 특성으로 변하는 것과 게이트 전압의 영향을 적게 받는 것을 확인하였다. 또한 도핑을 해준 $SnO_2$ 나노선의 경우 UV 반응과 회복 시간이 기존에 비하여 크게 감소하여 UV 센서에 더욱 적합해진 것을 확인하였다. 또한, 슬라이딩 트랜스퍼 공정을 이용하여 나노선을 원하는 기판에 정렬된 상태로 전이할 때 도핑한 나노선은 표면특성의 변화로 정렬도가 크게 감소하는 것을 확인하였고, 기판에 윤활제를 사용하여 정렬도를 높일 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.5
• /
• pp.670-676
• /
• 2008

A diesel engine requires a high Performance of lubrication because of the extreme conditions such as high temperature and pressure during combustion process in a cylinder. Many researches to improve the lubrication performance on the extreme condition have been executed. The lubricant oil suspended with nano-metal particles is the one of the measure. In this study, the nano-lubricant oil is applied on a commercial diesel engine, and the engine performance is tested. The results show the increase of maximum torque and the decrease of cylinder pressure, exhaust gas temperature, CO emission.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.17-18
• /
• 2014

최근 자동차 성능 및 연비향상을 위해서 엔진의 고출력화 및 소형화 경향이 뚜렷해지고 있으며, 이로 인해 엔진내부의 부품이 받는 환경은 더욱 가혹해 지고 있다. 즉, 자동차 엔진 구동부품은 금속간의 접촉가능성이 매우 높은 경계윤활조건에 놓이게 되며, 또한 배기가스 규제로 인한 첨가제를 최소화 하려는 경향에 따라 경계윤활 환경에서 더욱 심한 마모문제에 직면할 것으로 예상되어 내구성 및 내마모성이 높은 코팅기술에 대한 요구가 더욱 증가하고 있다. 본 연구에서는 Zr기지의 비정질 형성능을 갖는 합금계를 이용하여 아르곤 및 질소분위기에서 스퍼터링 함으로써 고경도의 ZrN상과 엔진오일과 반응하여 저마찰 트라이보 필름을 형성시킬 수 있는 금소계 원소가 Tissue phase로 존재하는 질화물 나노박막합성기술을 개발한 후 자동차 구동부품인 벨브트레인계 및 피스톤링/라이너 부품에 적용하여 마찰특성을 평가하였다.

• Rubber Technology
• /
• v.21 no.2
• /
• pp.53-58
• /
• 2020

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.184-188
• /
• 2008

It has been recognized that friction coefficient decreased with decreasing viscosity of oil in lubrication. In general, the more viscosity decreases, the more wear rate increases due to decrease load carrying capacity. It has been proposed that nano particles in oil decrease friction coefficient and wear rate. The purpose of this study is to apply oil of lower viscosity that mix with nano particles at the compressor used in a refrigerator to decrease friction coefficient keeping Load carrying capacity. Mineral oil of 8 cSt were used and mixed with nano particle. Friction coefficient was evaluated by a disk-on-disk tester. As a result, friction coefficient of nano oil decreased by 90% in comparison with raw oil. These results lead us to the conclusion that nano oil is new plan to raise efficiency of the compressor.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.121-125
• /
• 2012

This paper presents the friction and anti-wear characteristics of nano-oil with a mixture of a refrigerant oil and carbon nano-particles in the thrust slide-bearing of scroll compressors. Frictional loss in the thrust slide-bearing occupies a large part of total mechanical loss in scroll compressors. The characteristics of friction and anti-wear using nano-oil is evaluated using the thrust bearing experimental apparatus for measuring friction surface temperature and the coefficient of friction at the thrust slide-bearing as a function of normal loads up to 4,000 N and rotating speed up to 3,200 rpm. It is found that the coefficient of friction increases with decreasing rotating speed and normal force. The friction coefficient of carbon nano-oil is 0.023, while that of pure oil is 0.03 under the conditions of refrigerant gas R-22 at the pressure of 5 bars. It is believed that carbon nano-particles can be coated on the friction surfaces and the interaction of nano-particles between surfaces can be improved the lubrication in the friction surfaces. Carbon nano-oil enhances the characteristics of the anti-wear and friction at the thrust slide-bearing of scroll compressors.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.1219-1224
• /
• 2006

This paper presents the friction and anti-wear characteristics of nano-oil with n mixture of a refrigerant oil and carbon nano-particles in the thrust slide-bearing of scroll compressors. Frictional loss in the thrust slide-bearing occupies a large part of total mechanical loss in scroll compressors. The characteristics of friction and anti-wear Lising nano-oil is evaluated using the thrust bearing tester for measuring friction surface temperature and the coefficient of friction at the thrust slide-bearing as a function of normal loads up to 4,000 N and orbiting speed up to 3,200 rpm. It is found that the coefficient of friction increases with decreasing orbiting speed and normal force. The friction coefficient of carbon nano-oil is 0.015, while that of pure oil is 0.023 under the conditions of refrigerant gas R-22 at the pressure of 5 bars. It is believed that carbon nano-particles can be coated on the friction surfaces and the interaction of nano-particles between surfaces can be improved the lubrication in the friction surfaces. Carbon nano-oilenhances the characteristics of the anti-wear and friction at the thrust slide-bearing of scroll compressors.