• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.102-106
• /
• 2006

Magnetic nanoparticles can be used for a variety of biomedical applications. They can be used in the targeted delivery of therapeutic agents in vivo, in the hyperthermic treatment of cancers. in magnetic resonance (MR) imaging as contrast agents and in the biomagnetic separations of biomolecules. We have synthesized magnetite $(Fe_3O_4)$ nanoparticles using chemical coprecipitation technique with sodium oleate as surfactant. Nanoparticle size can be varied from 2 to 8nm by controlling the sodium oleate concentration. Magnetite phase nanoparticles could be observed from X-ray diffraction. Magnetic colloid suspensions containing particles with sodium oleate and chitosan have been prepared. Nanoparticles, both oleate-coated and chitosan-coated, have been characterized by several techniques. Atomic farce microscope (AFM) was used to image the coated nanoparticles. Magnetic hysteresis measurement were performed using a superconducting quantum interference device (SQUID) magnetometer at room temperature to investigate the magnetic properties of the magnetite nanoparticles. The SQUID measurements revealed superparamagnetism of nanoparticles.

• Membrane Journal
• /
• v.25 no.5
• /
• pp.398-405
• /
• 2015

Facilitated transport is considered to be a possible solution to simultaneously improve permeability and selectivity, which is challenging in normal polymeric membranes based on solution-diffusion transport only. We investigated the effect of adding mesoporous $TiO_2$ ($m-TiO_2$) upon the separation performance of facilitated olefin transport membranes comprising poly(vinyl pyrrolidone), Ag nanoparticles, and 7,7,8,8-tetracyanoquinodimethane as the polymer matrix, olefin carrier, and electron acceptor, respectively. In particular, $m-TiO_2$ was prepared by means of a facile, mass-producible method using poly(vinyl chloride)-g-poly(oxyethylene methacrylate) graft copolymer as the template. The crystal phase of $m-TiO_2$ consisted of an anatase/rutile mixture, of crystallite size approximately 16 nm as determined by X-ray diffraction. The introduction of $m-TiO_2$ increased the membrane diffusivity, thereby increasing the mixed-gas permeance from 1.6 to 16.0 GPU ($1GPU=10^{-6}cm^3$(STP)/($s{\times}cm^2{\times}cmHg$), and slightly decreased the propylene/propane selectivity from 45 to 37. However, both the mixed-gas permeance and selectivity of the membrane containing $m-TiO_2$ rapidly decreased over time, whereas the membrane without $m-TiO_2$ had more stable long-term performance. This difference might be attributed to specific chemical interactions between $TiO_2$ and Ag nanoparticles, causing Ag to lose activity as an olefin carrier.

• Membrane Journal
• /
• v.29 no.1
• /
• pp.61-65
• /
• 2019

Anisotropic particles have been issued in various fields due to their unique physical properties. Herein, a novel dynamic phase separation method (DPS) is introduced to fabricate anisotropic acorn-like nanoparticles. DPS consists of two dynamic conditions; solvent evaporation and nonsolvent induced precipitation. The bottom layer is controlled by feeding the water as a non-solvent diluent, and the phase separation of the upper layer relies on the diffusion and evaporation of a volatile good solvent. At this condition, the acorn-like particles were fabricated. Under a closed box filled with water (spontaneous phase separation), monodisperse polystyrene (PS) particles were synthesized. At the coexistence between DPS and spontaneous phase separation, the sizes of cap and particle were changed. Also, the volume of PS solutions influences on the particle shape. Since the unique structures could be utilized into various applications, if advanced techniques such as membrane-based controlled water feeding is developed, monodisperse acorn-like particles could be tuned.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.714-719
• /
• 2017

The controlled synthesis of inorganic materials with a specific size and morphology is an important factor in the development of new materials in many fields, such as nanoparticles, medicine, electronics, semiconductors, pharmaceutical sand cosmetics. Solution crystallization is one of the most widely used separation processes in the chemical and pharmaceutical industries. Calcium carbonate has attracted a great deal of attention in industry because of its numerous applications. The mean crystal size, crystal size distribution and morphology are important factors in the continuous crystallization process. In this study, the continuous crystallization of calcium carbonate by the calcium chloride process was investigated. The mean crystal size and crystal size distribution data were obtained by a particle size analyzer. The morphological imaging of the crystalswasper formed by SEM. Under steady state operation, the mean crystal size change was small, but increasing the input concentration and mixing rate increased the crystal size. In this operation, some aragonite was found, but the main crystal phase was calcite.

• Journal of the Korean Magnetics Society
• /
• v.19 no.1
• /
• pp.28-34
• /
• 2009

Magnetic nanoparticles are widely used for bio-medical applications such as MRI contrast agents, drug-delivery systems, cell separation and hyperthermia, thanks to their unique magnetic properties and physico-chemical characteristics. In the early stage, efforts were focused on synthesis of uniform nanoparticles of desired dimension to achieve targeted, stable functionalities. Recently, it has been of great interest in dispersion of such nanoparitcles in aqueous solution and to render the nanoparticles bio-compatible with biofunctionality on request for utilization in bio-medical fields. In this paper, we survey the research status and give prospective on future work of magnetic nanoparticles for biomedical applications.

• Membrane Journal
• /
• v.26 no.5
• /
• pp.351-364
• /
• 2016

In recent decades, many researchers have tried to improve desalination performances of polyamide (PA) thin-film composite membranes (TFCs) by incorporating nanomaterials into a selective PA layer. This review focuses on PA-based nanocomposite membranes with high performances for energy-effective desalination in reverse osmosis. Carbon based nanomaterial (e.g., graphene oxide (GO), carbon nanotubes (CNT)) and/or other nanoparticles (e.g., zeolite, silica and etc.,) were applied to overcome the trade-off correlation between water permeability and salt rejection of current polymeric desalination membranes. Here, this brief review will discuss current studies of PA-based nanocomposite membranes with enhanced separation characteristics and provide the future research direction to achieve further improved desalination performances.

• Analytical Science and Technology
• /
• v.22 no.1
• /
• pp.75-81
• /
• 2009

A flow and sedimentation field-flow fractionation method has been used to characterize colloidal particles in environmental samples. The opposed flow sample concentration (OFSC) method was employed. The OFSC procedure was optimized for the analysis of particles in ground water with respect to various experimental parameters including sample introduction time, flow rates, etc. The effectiveness in low concentration and characterization of the OFSC-FlFFF was demonstrated with GW-1 and GW-2 ground water samples. Ground water of upto 100 mL has been successfully loaded, concentrated, and characterized by OFSC-FlFFF. The OFSC technique allow the application of FlFFF possible for the separation and characterization of colloidal particles in very low concentrations. The results show FFF provides a simplified alternative to existing off-line concentration procedures, and shows a high potential for the applications to the analysis of dilute colloidal particles in the environmental samples.

• Clean Technology
• /
• v.27 no.1
• /
• pp.55-60
• /
• 2021

Antibiotics are compounds broadly used to treat patients with infectious diseases and to enhance productivity in agriculture, fisheries, and livestock industries. However, due to the overuse of antibiotics and their low biodegradability, a substantial amount of antibiotics is leaking into the sewer, subsequently resulting in pollution and the emergence of antibiotic-resistant bacteria. This study explores biodegradable serum albumin's potential as an adsorbent to remove antibiotics from water. Serum albumin is a natural blood protein that transports various metabolites and hormones to all tissues' extravascular spaces. While serum albumin is highly water-soluble, it has intrinsic binding sites which readily accommodate ionic, hydrophilic, or hydrophobic molecules, rendering it a good building block for a nano-adsorbent. To induce coacervation, a desolvating agent, ethanol, was added dropwise into the aqueous albumin solution, resulting in dehydration and liquid-liquid phase separation of albumins into albumin nanoparticles within a size range of 150 ~ 170 nm. The addition of glutaraldehyde as a cross-linker improved the size stability and homogeneity of albumin nanoparticles. Adsorption of amoxicillin antibiotics on albumin nanoparticles was dependent upon glutaraldehyde concentration used in desolvation and pH during adsorption. The maximum adsorption capacity measured by spectrophotometry was found to be 12.4 micrograms of amoxicillin per milligram of albumin nanoparticle. These results demonstrate serum albumin's potential as a building block for fabricating a natural nano-adsorbent to remove antibiotics from water.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.23-23
• /
• 1994

환경에 대한 관심이 높아지는 가운데 용존무기염을 효과적으로 분리하기 위한 많은 기술이 연구되고 개발되었다. 이중 막분리를 이용한 무기염의 제거 방법(역삼투법)은 상변화를 수반하지 않는다는 점에서 많은 주목을 받아왔다. 최근들어서는 2가 이상의 염에 대한 선택적 분리 능력을 가지고 있고, 작동압력이 낮아 에너지 소모가 적은 나노여과법(Nanofiltration)이 폐수나 정수처리에 도입되고 있다. 본 연구는 이러한 나노여과법을 이용하여 무기 염을 제거하는 방법에 관한 것이다. 실험에 사용한 분리 막은 Filmtec사의 NF-40, NF-45 두 가지이고 사용한 모듈은 평탄형과 나관형의 두 가지이다. 대상이 되는 폐수는 소석회 처리 단계를 거친 산 폐수로 주로 $Ca^{2+},So_4^{2-}$등의 2가 이온과 Na, Cl등의 1가 이온으로 구성되어 있다. 여기서 $CaSO_4$는 스케일을 형성할 가능성이 크므로 1가 이온에 비해 제거할 필요성이 크지만, 비교적 용해도가 높고 과포화 되는 성질이 커서 처리에 어려움이 있다. 이러한 폐수를 나노여과하였을 때 NF-45 평판평 막의 경우 농축 인자 2.6 부근에서, NF-40 나관평 막의 경우 농축 인자 3 부근에서 막 투과 유속의 급격한 감소가 관찰되었다. 이 때 용액 내 전도도와 용액 내 입자의 분포 변화를 종합하여, 평판형 모듈과 나관형 모듈의 막 오염 현상에 대한 메커니즘을 제시하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.109-109
• /
• 2012

아라미드 섬유는 태양광의 직사광선에 계속 노출될 경우 120주 경과 후에는 강도가 3분의 1로 떨어지는 단점이 있다. 이와 같은 단점을 보완하기 위해 나노 크기의 금속산화물인 $TiO_2$ 졸-겔 나노합성법을 이용하여 나노졸을 제조하고 이를 직물에 함침하는 공정을 통하여 아라미드 섬유의 내광성 증진에 대해 연구하였다. TTIP, TEOS 등의 금속전구체를 이용하여 구형의 나노졸 합성에 의한 $TiO_2$ 나노졸을 수분산형태의 졸로서 섬유가공 공정상에 접목하였다. 제조된 나노크기의 $TiO_2$ 입자분포와 크기, 미세구조 및 결정상을 알아보기 위해 입도분포분석기, TEM, XRD를 이용하였다. $TiO_2$ 나노졸을 함침한 아라미드 직물은 내광성은 24, 48, 96시간 동안 Xenon-arc 광조사한 후, 물성변화를 분석하였다. 나노졸 합성시 반응물의 농도 및 용액의 pH 조건에 따른 나노졸의 미세구조를 TEM을 이용하여 관찰한 결과, 반응물의 농도에 따라 평균입도는 313.7nm, 500.5nm, 840.3nm, 1002nm로 커졌다. 하지만, 반응물의 농도가 증가할수록 시간이 지남에 따라 입자들이 층 분리 현상이 관찰되었으며, 단분산된 나노졸 입자를 제조하기 위해서는 TTIP의 투입량을 0.67mole(200ml)로 유지하였다. 또한 이를 아라미드 직물에 함침하여 광조사 시간에 따른 아라미드 섬유의 물리적 특성의 변화를 분석하였다.