• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.11-17
• /
• 2014

In this study, a hydraulic model experiment under wave conditions was carried out to investigate the gap/distance between two near-unit farm lines that affects the rope kink and shape variation of a seaweed farm during mooring block movement. As a result, rope kink occurred during the low wave height condition as the gap/distance between the two near-unit farm lines decreased. The seaweed farm maintained a stable shape in the higher wave height conditions as the gap/distance between the two near-unit farm lines increased. This result indicates that rope kink is sensitively affected by the gap/distance between the two near-unit farm lines. A tendency to increase the critical wave height was observed when mooring block movement occurred, and as the mooring block weight and wave period increased. From the experimental results in which incident wave conditions and the mooring block weight changed, as the front side mooring block weight increased from 3.0 to 8.0 tons, the seaweed farm was stable, and rear side mooring block movement hardly occurred. The observed tension of the seaside mooring line was a maximum at about 3.0 ton/m.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.223-226
• /
• 2002

일반적으로 바레(barre)라고 하는 이색현상(shade variation)에 대해 ASTM에서는 직물의 위사 또는 환편물의 환편코스에 평행하고 연속적인 띠와 줄이 비고의적이고 반복적으로 나타나는 형태라고 정의하고 있으며, 원사의 물리적, 광학적 및 염색성 차이 또는 원단조직의 기하학적 차이와 이들의 복합적인 원인에 의해서도 발생할 수 있다고 하였다[1]. 또한, 면제품의 이색은 면섬유의 마이크로네어[2], 색상[3], 면사의 선밀도, 꼬임수, 헤어리니스 그리고 편성장력 등의 변동에 영향을 받으며, 산지, 수확시기 및 물성이 다른 원면의 부적절한 혼면 등에 의해서도 발생되는 것으로 알려져 있다[4]. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.1018-1022
• /
• 2000

Enhancement of the accuracy of products and productivity are essential to survive in a global industrial competition. This trend requires tighter dimensional tolerance specifications. To actively cope with the rapid change of the workpiece material and cutter geometry, a general method that can predict and analyze the machined surface is needed. Surface generation model for the prediction of the topography of machined surfaces is developed based on cutting force model considering cutter deflection and runout. This paper presents the method that constructs the three-dimensional machined surface error following the movement of a cutter, irrespective of the variations of cutting conditions. In addition, the effects of the cutting forces and the kink shape on the machined surface are extensively investigated.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.175-180
• /
• 2020

In this study, we developed a micropattern technology in the shape of RFID TAG antenna using ultrasonic micropattern manufacturing system developed to enable micropattern technology. The ultrasonic tool horn in longitudinal vibration mode was installed in the micropattern manufacturing system to develop the ultrasonic press technology for the micropattern antenna shape of the RFID TAG antenna shape on the insulating sheet surface. The ultrasonic shaping technology was manufactured by applying the resonance design technique to a 60kHz tool horn, and by using the micropattern manufacturing system, the coil wire having a thickness of 25㎛ can be ultrasonically press-molded on an insulating sheet of 200㎛ or less. In ultrasonic press technology, the antenna shape having a minimum line width of 150㎛ could be molded without disconnection, peeling, or twisting of the coil wire.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.5
• /
• pp.455-460
• /
• 2021

Nerve torsion is a rare condition that causes sensory abnormalities and decreased muscle strength due to a nerve-twisting phenomenon in the peripheral nerves. To date, the progression of the condition from its cause to diagnosis and treatment has not been established. The authors report three cases of good results from the treatment of nerve torsion in the anterior interosseous and radial nerves with epineurotomy and neurolysis.

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.49-56
• /
• 2021

In this study, we investigated the necessary mechanical properties of conductive multifilament yarns for fabricating the electrodes of biosignal measurement pressure and stretch textile sensors using embroidery. When electrodes and circuits for smart wearable products are produced through the embroidery process using conductive multifilament yarns, unnecessary material loss is minimized, and complex electrode shapes or circuit designs can be produced without additional processes using a computer embroidering machine. However, because ordinary missionary threads cannot overcome the stress in the embroidery process and yarn cutting occurs, herein, we analyzed the S-S curve, thickness, and twist structure, which are three types of silver-coated multifilament yarns, and measured the stress in the thread of the embroidery simultaneously. Thus, the required mechanical properties of the yarns in the embroidery process were analyzed. In the actual sample production, cutting occurred in silver-coated multifilament rather than silver-coated polyamide/polyester, which showed the lowest S-S curve. In the embroidery process, the twist was unwound through repetitive vertical movement. Further, we fabricated a piezoresistive pressure/tension sensor to measure gauge factor, which is an index for measuring biological signals. We confirmed that the sensor can be applied to the fabrication of embroidery electrodes, which is an important process in the mass production of smart wearable products.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.535-539
• /
• 2022

This study analyzed the efficient hose loading method for indoor fire hydrants, and the experimental results are as follows. An effective fire hose loading method is to be derived through an experiment comparing the fire hose loading method of an indoor fire hydrant and the speed of fire suppression. When the fire hose was loaded by folding, it took an average of 33 seconds to load the fire hose, and for the hangyeopsal, it took an average of 69 seconds to load the fire hose, showing a significant difference. First, in the folding hose deployment experiment, subjects A, C, D, and E showed similar values from 34 seconds to 37 seconds, respectively. The reason seems to be the result of the fact that the fire hose was not twisted when unfolding, and that it was possible to deploy the hose smoothly. Subject B showed the lowest deployment time at 25 seconds, which seems to be the result of B's experience in deploying the fire hose. Second, in the hose unfolding experiment, subjects A, B, C, and E had a similar time period of 44 to 76 seconds, respectively. However, the test subject D was significantly higher at 110 seconds. The reason is that the attempt to prevent hose kinking when deploying the fire hose and the unstable psychological state through tension are judged to increase the fire hose deployment time.

• Weed & Turfgrass Science
• /
• v.4 no.3
• /
• pp.219-224
• /
• 2015

This study was conducted to evaluate the effect of herbicidin, new natural herbicidal substances, derived from soil actinomycetes Streptomyces scopuliridis. Several weed species were subjected to examine the germination inhibition and herbicidal activity at the concentration from 100 to 2,000 ppm. There was no selectivity in germination inhibition and herbicidal activity against crops. Germination of Echinochloa oryzoides, Digitaria ciliaris, Abutilon theophrasti and Amaranthus retroflexus was inhibited completely when 7.81 ppm of extract was treated in petri dish. Pre-emergence application of herbicidin in soil condition showed low inhibition against weeds. However, post application of herbicidin in green house resulted in the necrosis of weeds at the concentration of 2,000 ppm. A. retroflexus was sensitive to herbicidin at the low concentration of 62.5 ppm, whereas E. oryzoides was tolerant to lower concentration of herbicidin until it became withered at the concentration of 2,000 ppm. In conclusion, herbicidal substances derived from S. scopuliridis herbicidin, which is consisted with herbicidin A and B, have dominant effect on germination and growth inhibition. On the other hand, herbicidin was insufficient to control gramineous weeds. In future, it will be needed to develop the combination of herbicidin with other herbicide or compounds to control gramineous weeds as well.