• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.107-116
• /
• 2011

Rigid soil containers (or rigid boxes) are often used for 1g shaking table tests. The rigid boxes, however, do not accurately simulate the amplification of ground acceleration and phase difference of seismic motion in the model ground due to the confinement of shear deformation and the reflection of seismic wave at the box walls. Laminar soil containers (or laminar shear boxes) can simulate the free field motion at convincingly superior accuracy than the rigid ones. In this study, the soft ground is modeled for both types of boxes and is subjected to seismic loading using a 1g shaking table. The comparison of the results using the two types of soil containers illustrates that, in case of the rigid box, the ground acceleration shows non uniform distribution and the phase synchronization of input motion. Whereas, the dynamic behavior of the laminar shear box shows good agreement with the free field behaviors such as the amplification of ground acceleration and the occurrence of phase difference.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.113-119
• /
• 2014

The positioning accuracy of GNSS surveys deteriorates due to various error factor, and many users sometimes ignore Phase Center Variation (PCV) of antennas. IGS provides an ANTEX file which contains PCV correction information to correct for PCVs. But it is not directly applicable because PCV correction information is provided at 5-degree intervals in the azimuth and elevation directions for the case of receiver antennas, and at 1-degree intervals in the nadir angle for the case of satellite antennas. So, we devised new and optimal ways of interpolating PCV in any desired line of sight to the GNSS satellite. We used spherical harmonics fitting methods in terms of the azimuth and elevation angle for interpolation, and found an optimal degree and order. It is shown that the best accuracy was obtained from the 8 by 8 spherical harmonics. If one requires lower burden on computing resources, the order and degree less than 8 could produce resonable accuracy except for 1st and 5th order.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.58-66
• /
• 2010

In this paper, we have constructed high-resolution topographical map of macro-tidal Malipo beach through integration of terrestrial LiDAR measurement and MBES survey data at inter-tidal zone. To acquire the enough information of inter-tidal zone, we have done terrestrial LiDAR measurement mounted on the roof of vehicle with DGPS through go-stop-scan method at the ebb tide and MBES depth surveying with tide gauge and eye staff measurement for tide correction and MSL calculation at the high tide all together. To integrate two kinds of data, we have unified the vertical coordination standard to Incheon MSL. The mean error of overlapped inter-tidal zone is about 2~6 cm. To verify the accuracy of terrestrial LiDAR, RTK-DGPS measurement have done simultaneously and the difference of Z value RMSE is about 4~7 cm. The resolution of Malipo topographical map is 50 cm and it has constructed to DEM (Digital Elevation Model) based on GIS. Now it has used as an input topography information for the storm-surge inundation prediction models. Also it will be possible to use monitoring of beach process through the long-term periodic measurement and GIS-based 3D spatial analysis calculating the erosion and deposition considering with the artificial beach transition and coastal environmental parameters.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.2
• /
• pp.19-29
• /
• 2012

Numerous studies suggested that fish assemblage structure reflects the status of stream ecosystems. The status of streams integrity, including various trophic levels, water quality and habitat degradation, can be assessed by fish assemblages. In this study, we investigated the relationships between fish assemblages and streamline geometry of streams. Previous studies suggested that geomorphologic parameter can be a critical factor of permeability between adjacent two systems. From a landscape ecological perspective, edges may partially control the flow rate of energy between two adjacent systems. Thus, the Streamline geometry can be a geomorphologic parameter that exhibits the integrity of stream. We selected the Nakdong river for study areas, which is one of major rivers and the longest (525 km) River in South Korea. We used the revised IBI representing overall ecological characteristics of Korean fish assemblages and eight sub-assessment criteria of IBI, collected from 82 sampling sites in the Nakdong River. For calculating the Streamline geometry, we measured fractal dimension index that generally used in biology, ecology and landscape ecology. We used the digital land-use/land-cover map and generated a 1-km buffer for each sampling site and refined the shape of the Streamlines. Pearson correlation analyses were performed between Streamline geometry and IBI and sub-assessment criteria of IBI. The results show that IBI and eight sub-assessments of fish are significantly correlated with geometry of Streamline. The fractal dimension of Streamline geometry were related with IBI (r = 0.48) and six sub-assessments of IBI, including total number of native fish and native species, the number of riffle benthic species, sensitive species, tolerant species and native insectivore. Especially, the number of tolerant species(r = -0.52) and native insectivore(r = 0.52) show strong correlation with geometry of Streamline. These results indicate that lower Streamline geometry can result in poor fish assemblages, while higher geometry of Streamline can enhance fish assemblages by potentially supplying insects and better habitat conditions. We expect the results of our study to be useful for stream restoration and management. However, we see the necessity of study investigating the mechanisms how Streamline geometry affect fish assemblages.

• Journal of Food Hygiene and Safety
• /
• v.35 no.4
• /
• pp.354-364
• /
• 2020

For this paper we analyzed heavy metals including lead, cadmium, arsenic and mercury, and conducted risk assessment on 171 types of herbal medicines used as foods and drugs distributed in Seoul's Yangnyeongsi and Kyungdong (Gyeongdong) herbal medicine markets. The concentrations of the heavy metals were measured by the ICP-MS and a mercury analyzer. The detection ranges of the lead, cadmium, arsenic and mercury were found to be ND-4.719 mg/kg, ND-1.019 mg/kg, 0.002-8.696 mg/kg and ND-0.058 mg/kg, respectively. Artemisiae Capillaris Herba exceeded the standards of the MFDS (Ministry of Food and Drug Safety) for cadmium items, and Actinidiae Ramulus et Fulium et Fructus Vermicultus exceeded the standards for arsenic items. The non-carcinogenic risk assessment showed that there were no items exceeding 1 and that they were safe. The risk of carcinogenicity to lead was below 10^-6 in all items and was evaluated as safe. The risk of carcinogenicity of arsenic was almost all in the range of 10^-4 to 10^-6. All %PTWI are considered to be safe below 100.

• Food Science of Animal Resources
• /
• v.26 no.2
• /
• pp.236-240
• /
• 2006

This study was conducted to manufacture new value-added corn dog using potato, milk powder and egg as nutritious and surplus agricultural and livestock products. A typical corn dog was manufactured with corn dog powder, potato, milk powder and egg as the same method of conventional corn dog. Corn dogs were divided into four groups; control group A [conventional corn dog], group B [corn dog manufactured with the fixed content of corn dog powder, milk powder, and egg, potato, water (3: 3: 1: 1: 2)], group C [corn dog manufactured with the fixed content of corn dog powder, milk powder, and egg, potato, water (3: 3: 2: 1: 2)], group D [corn dog manufactured with the fixed content of corn dog powder, milk powder, and egg, potato, water (3: 3: 1: 2: 2)], Viscosity of corn dog batter, pH of corn dog, rheology and sensory evaluation were measured. There were no significant differences for viscosity and pH between original corn dog and manufactured corn dog (p>0.05). However, hardness and brittleness of manufactured corn dog D were superior to the other groups (p<0.05). Also, manufactured corn dog D was superior to the other groups by the results of sensory evaluation. Therefore, these results suggest that it may be possible to manufacture new value-added corn dog which can help to stimulate the consumption of nutritious and surplus agriculture and livestock products.

• Journal of the Korean Society of Food Culture
• /
• v.20 no.6
• /
• pp.633-637
• /
• 2005

The effects of adding hull powders of black soybean on quality characteristics of tobu were studied. Proximate composition of the black soybean hull powders was crude ash, crude protein, crude fat, and carbohydrate at 2.60, 11.35, 2.18, and 73.97%, respectively. The addition of 5% black soybean hull powder decreased the production of whey and consequently increased the yield of tobu. Texture properties of evaluation hardness, adhesiveness, chewiness were the best in tobu which was made with 5% black soybean hull powders. Sensory evaluation showed texture, firmness were not significantly different among tobu with yellow soybean, black soybean, and added to 0.5% black soybean hull powders. At the beginning of the period of storage, there were not differences of microbial cell count as increasing black soybean hull powders, but observed after passing 5 days. The results of total microbial cell count showed that adding 5% black soybean hull powders in processing tobu extend storage time.

• Journal of Dairy Science and Biotechnology
• /
• v.26 no.2
• /
• pp.9-22
• /
• 2008

This work has been conducted as a part to set up the regulations and the scientific evaluation systems for the functional dairy products with health claims in Korea. Toward this end, current regulations, requirements, and all kinds of provisions related to the functional dairy products overseas were taken into accounts and feasible recommendations of new initiatives on the current regulations as well. By doing so, not only protecting hopefully the innocent consumers from the false labeling statements and fake advertisements, but also eventually to revitalize the stagnated domestic dairy industries. Currently, functional daily products are simply regarded as "Dietary Supplements" in the United States, and subjected to the regulations under the Dietary Supplement Health and Education Act, established m 1994. Manufacturers and sales distributors should notify their products to the FDA, which is in charge of the dietary supplements on nutrition and labeling, in advance when they start marketing a new dietary ingredient or any foods containing it in the States. For EU countries, there exists keen interests about the functional food products between the member countries of the European Union even though the products are categorized into "Food Supplements" similar to those in the United States. Therefore, they maintain a cautious attitude in applying the health claims to the functional food products. On the other hand, under the Japanese health food system, functional foods are qualified to the functional health foods in terms of legal status as long as any traditional foods can meet the legal standards in its effectiveness, safety as well as quality, along with significant scientific evidences related to the products, thus categorized into "Foods for Specified Health Uses and "Foods with Nutrient Function Claims". Through this study, we may have some expectations and potential utilizations as follows: Legal regulations of dietary supplements especially for the dairy products will be implemented by the outcomes of this research and proposed a tentative amendment of functional ingredients for the sake of consumer protection from the false advertisements and overstatement labeling. Current regulations on the animal foods processing and advertisements will be amended and supplemented in order to revitalize the current downturn dairy sales and to harmonize the international Codex recommendations. The results obtained from this study will make the consumers a wise selection of the dairy products with health claims and be utilized for consumer education and advertisement of the functional products as well.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.380-385
• /
• 2014

Spherical atomizing reduction steel slag was prepared by atomizing technology using reduction steel slag (ladle furnace slag, LFS) generated from steel industry. In order to develop the mass-recycling technology of atomizing reduction steel slag, polymer concrete composite was prepared using spherical atomizing reduction steel slag instead of fine aggregate (river sand) and coarse aggregate (crushed aggregate), depending on the grain size. Different polymer concrete specimens were prepared with the various proportions of polymer binder and replacement ratios of atomizing reduction steel slag in order to investigate the characteristics of polymer concrete composite. Results showed that compressive strengths of polymer concrete specimens decreased with the increase of replacement ratios of atomizing reduction steel slag, but flexural strengths of the specimens showed a maximum strength at the 50% of replacement ratios of atomizing reduction steel slag. It was concluded that addition ratio of polymer binder, which affect greatly on the prime cost of production of polymer concrete, could be reduced by maximum 18.2 vol% because the workability of the polymer concrete was remarkably improved by using the atomizing reduction steel slag. However, further study is required because the mechanical strength of the specimen using atomizing reduction steel slag was greatly reduced in hot water resistance test.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.64-86
• /
• 1994

The authors have transplanted periodontally involved roots which had been root planed into healthy and periodontally involved extraction sockets, and studied the root resorption patterns as well as its effect on new bone formation and wound healing. Alveolar bone around mandibular premolars of 6 adult dogs has been surgically removed, followed by ligation of orthodontic elastic wires for 8 weeks inducing chronic periodontal disease. After removing the crown portions, roots were extracted, and notches were made on the root surfaces discriminating healthy and periodontally involved areas using burs. Controls and experimental groups were divided as follows. Control I : Transplantation of periodontally involved root into healthy extraction sockets. Control II : Transplantation of periodontally involved root into diseased extraction sockets. Experimental group I : Transplantation of root planed roots into healthy extraction sockets. Experimental group II : Transplantation of root planed roots into diseased extraction sockets. Extraction sockets were sutured after transplantations, completely submerging the roots. Healing progress was histologically observed at 2nd, 8th, 12th, and 20th weeks, and the results were as follows ; 1. No inflammation or infection within the extraction sockets had been observed in all groups throughout the experimental period. 2. Reversal lines were observed at week 2 in all groups, clearly discriminating socket walls and new bone, and numerous blood vessels were observed in the new bone trabeculae. 3. Experimental groups showed markedly less root resorption compared to the controls at week 2, but as time progressed, severe resorptions were present in all groups. 4. Localized areas of new bone ankylosis were observed, and the rest of the areas showed collagen fiber insertion with new bone formation at its periphery. 5. No clear differences were found in healing and alveolar bone regeneration between healthy and diseased extraction sockets. 6. The amount of root resorption and ankylosis had increased up to week 8 and 12, showing ankylosis of new bone and the roots. However, no further increase in ankylosis was observed at week 20. 7. Most of the cementum on healthy roots was directly ankylosed to new bone at week, 2, and were gradually resorbed and replaced by new bone thereafter. These results appear to indicate that root planing may inhibit early root resorption of transplanted roots, but gradual replacement by alveolar bone and collagen fibers eventually occur. Condition of the roots or presence of disease in extraction sockets do not appear to make marked differences in alveolar bone regeneration process.