• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.66-75
• /
• 2006

As construction for road tunnel is increasing, various geotechnical conditions can be faced during the construction stage. Especially, if the tunnel is located in limestone area, many kinds of site investigations such as in-situ boring, electrical resistance survey, TSP(Tunnel Seismic Prediction) and etc., are conducted before and during the construction. By conducting these preliminary tests, location, size, and filling materials in limestone cavities can be approximately estimated. Once some cavities which can be harmful for tunnel safety are predicted, methods for ground reinforcement and tunnel excavation, corresponding those ground conditions, have to be established and verified by measurement data and numerical analysis. If necessary, invert lining should be also considered. In this paper, by studying some cases of tunnels constructed in limestone area, predicted problems during construction and rational countermeasures for those are presented.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.751-754
• /
• 2009

이 연구는 2007년 1월 1일부터 동년 12월 31일까지 1년간 대전 소재 일개대학병원에서 수술 취소된 총 146명의 환자를 대상으로 하였으며, 계획된 수술의 취소율을 극소화하여 병원 경영의 합리적 개선과 진료 만족도를 증가시키고자하는 목적에서 이루어졌다. 조사대상자의 성별 분포를 보면, 남자 56.8%, 여자 43.2%로 여자보다 남자가 높은 분포를 보였다. 수술 취소 원인을 살펴보면 수술취소까지 이르지 않을 수 있었던 사항과 불가항력적으로 수술을 취소해야 할 사항으로 나눌 수 있는데, 이런 분류를 통해 전체 수술 취소 사유 중 60.0%는 예방이 가능했던 사항이라고 했다. 본 연구결과를 기초로 타 연구자와 병원관리자에게 수술 취소율 감소 개선을 위한 정책방향의 수립을 제언한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.432-437
• /
• 2009

This paper has investigated disease structure and pattern against 9,955 (34.6%) elderly patients aged 60 or older at 'K' University Hospital from January 1 to December 31, 2007 through canonical correlation analysis. According to this investigation, the variable with the biggest correlation coefficient has been whether or not surgery has been performed. Since the aged are weaker than the young physically and mentally in general, a surgical operation has been considered. I hope that the result of this paper would be used as basic data for establishment of systematic geriatric health program and disease statistics.

• 전기의세계
• /
• v.60 no.11
• /
• pp.56-63
• /
• 2011

In the face of global warming and resource depletion, a smart grid has been suggested as one way of contributing to abating the environment problems and increasing energy efficiency. Smart grids utilize renewable energy which has intermittent and irregular output power depending on weather conditions. In order to maintain stability and reliability of the power system, smart grids need to have complementary measures for the possible unstable system conditions. Cogenerating systems such as Combined Heat and Power(CHP) can be one good solution as it has capability of instantly increasing or decreasing output power. Therefore, this paper investigates the connectivity between Combined Heat and Power systems and smart grid technologies. The smart grid national roadmap formulated by South Korea Ministry of Knowledge and Economy and 'IEC Smart Grid Standardization Roadmap' are analyzed to extract related components of the smart grid for the CHP connection. Also, case studies on demonstration projects for smart grids with CHP systems completed or currently being implementing in the world are presented.

• Journal of Energy Engineering
• /
• v.6 no.2
• /
• pp.129-136
• /
• 1997

This paper presents a new economic load dispatch considering atmospheric emissions such as NOx and SO$_2$caused by the operation of fossil-fueled thermal generation in power systems. The proposed method is described for scheduling their output of thermal power units so as to comply with total emission constraint, area emission constraint and the both of those constraints. Also, by using a trade-off curve, representing all dispatch alternatives and conflict between the emission and the fuel cost, the sensitivity analysis of the emission and the fuel cost is applied to this algorithm. By the way, this proposed method is analyzed how dispatch changes as a function of the total environmental cost, and as a function of the relative weighting of individual environmental insults, e.g, NOx and SO$_2$. By applying the proposed method to the system, the usefulness of this method is verified.

• Journal of Energy Engineering
• /
• v.18 no.1
• /
• pp.37-48
• /
• 2009

Recently, the significance of Green-Energy led by low-carbon Green-Development is increasing as well in Korea. Among them, the most practical solution is the cogeneration which performs the best energy efficiency. This paper addresses the two of RCS(Regional Cogeneration System) connecting heat each other. It is conducted to quantitatively evaluate algorithm that optimally operate the heat transaction considering various operating modes. The proposed method is tested using the real system. Through the case studies, it is verified that the proposed algorithm of heat transaction can evaluate availability.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.55-59
• /
• 2004

In this study, the required life cycle cost is evaluated in consideration of the equipment's availability during its lift cycle. In order to meet the maximum availability required by the process, the failure cost and life cycle cost is assessed The optimal equipment selection method is presented according to the analysis of the failure cost and life cycle cost. For the systems in which equipments are connected serially, the optimal equipments are selected by minimizing the life cycle cost and satisfying the required system availability goal. In addition, the selection methods and lift cycle cost are analyzed according to the cost variation of the equipment. By using the life cycle evaluation procedure, the failure cost and maintenance cost needed during the life cycle of the equipment can be presented.

• Journal of Yeungnam Medical Science
• /
• v.9 no.2
• /
• pp.422-426
• /
• 1992

One case of Congenital Cutis Aplasia is presented. The defect involved includes full-thickness skin defect of scalp and cranium. The patient was treated with debridement of dirty necrosed crust which covered exposed dura mater and with double opposing rotation flap including pericranium for bone regneration. The donor site was covered with skin graft from right thigh. During operation, the superficial temporal arterty was found to be short and weak. And after operation, the margin of flap were congested and finally necrotized. The necrotic wound was treated with conservative management. The vascular impairment is thought to be main course of Congenital Cutis Aplasia. So we conclude that the treatment of choice is conservative management or careful flap surgery for coverage of defect area.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.3
• /
• pp.273-282
• /
• 2005

A star sensor daytime observation model is developed in order to test the performance of the star sensor useful for daylight application. The centroid errors of the star sensor in the day time application are computed by using the model. The standard atmospheric model (LOWTRAN7) is utilized to calculate the physical quantities of the daylight atmospheric environments where the star sensor is immersed. This observation model takes the separation angles between the sun and star, the centroid algorithm and the various system specifications of the star sensor into the account. The developed star sensor model will provide more realistic measurement errors in estimating the performance of the attitude determination from the vector observations.

• Journal of Astronomy and Space Sciences
• /
• v.16 no.2
• /
• pp.273-284
• /
• 1999

In order to develop star trackers for a satellite in our country we studies selection procedure of optical parameters. For logical selection of the optical parameters, we simulated the entire processes in which star lights imaged on a CCD sensor were read into and processed in an associated electronics. The simulation resulted in relations between star's magnitude and achievable pointing accuracy, from which we derived optimal optical parameters to satisfy a required pointing accuracy of a star tracker. The selected optical parameters were used in an optical system design of a star tracker with a pointing accuracy of 10 arcsec.