• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1547-1552
• /
• 2014

AREX (Incheon Airport Railway Express) operates trains between Seoul and Incheon Airport. One type of trains stops on every 10 stations, and another only on the two end-stations which called an Express train. The passengers traveled on express trains are very small since there are only two stops, Seoul and Incheon Airport Stations. The passengers of express trains will be more attracted if the express train stops on the intermediate stops (Gimpo station) since Line #9 and Line #5 are connected to from Gangnam. An on-board survey was conducted to predict the potential demand in case the express train stops at the Gimpo station. Further the costs required to improve platforms of the station were estimated to figure out the economic feasibility against the demand increases. It analyzed 938 increases for the case of intermediate stopping on the same travel time condition and 1,299 increases for the case of extra stop with decreased travel time. The study concluded the latter case appears desirable in the stance of long-term while both cases are economically feasible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2062-2073
• /
• 2014

Relationship learning is very important to grow and develop interorganization. Greatly to ours regret, relationship learning study have left unexplored with regard to interfirm's relationship. The purpose of this study is to analyze the effects of relationship benefits on relationship learning and cooperation of buyer-seller in food material industries. We collected statistically usable data from 228 questionnaire respondents who deal with food firms and analyzed them with SPSS 20.0 and Amos to achieve research's goals. Analysis results revealed that, first, relational benefits of economical benefits and psychological benefit had impacts on relationship learning between buyer and seller in food material channel market. Second, the survey found that relationship learning has impact on collaboration. Third, on the other hand, relationship benefits of social benefits had no effect relationship learning. Summary and strategy implication will be mention in conclusion.

• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.431-436
• /
• 2013

Ricania sp. lay eggs into the new twigs of blueberry and suck nutrients causing growth retardation and a sooty mold symptom. This study was conducted to investigate the emergence success and developmental period of overwintered eggs of Ricania sp. under the seven constant temperatures from 10 to $34^{\circ}C$ by $4^{\circ}C$ intervals (14L:10D). We also monitored the emergence time of the Ricania sp. nymph at blueberry by 3 ~ 4 day interval using a modified leaf clip cage. Development times from the overwintered egg to $1^{st}$ nymph were 107.1, 54.5, 33.9, 25.3, 25.1 and 16.7 days and the emergence successes were 23.1, 30.8, 13.8, 21.7, 11.9, and 0.6% at 14, 18, 22, 26, 30 and $34^{\circ}C$, respectively except at $10^{\circ}C$. The developmental periods were decreased with increasing temperatures. First emergence date of the nymphs in the field was between 19 and 22 May, and the average emergence success was 19.6%. The present study might be helpful to establish the management strategy of Ricania sp. based on the biological characteristic.

• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.365-370
• /
• 2013

The plume fruit moth, Grapholita dimorpha Komai, a fruit tree pest occurring in the northeast Asia, was firstly reported to infest apple in Korea in 2009, but its direct damage to other fruit trees has been poorly studied. In this study, we investigated shoots and fruits of both peach and plum trees and compared their damage rates by G. dimorpha to those by G. molesta, a congeneric species. In order to discriminate the two moth species, we developed a molecular diagnosis method using species-specific primer sets on different PCR conditions and distinguished the two species collected from the damaged shoots or fruits. The shoots and fruits of peach were infested mostly by G. molesta. However, in plums, the shoots were damaged by G. molesta and the fruits mostly by G. dimorpha. In addition, these two species showed a clear difference in host preference in fruit damage, where 92.5% of the Grapholita moths collected in peach fruits were identified as G. molesta, but 97.0% of the moths in plum fruits were G. dimorpha. The difference of the damage between the two fruit trees may give important information for monitoring of the two moth species in these orchards.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.422.1-422.1
• /
• 2016

Graphene quantum dots (GQDs), a new kind of carbon-based photo luminescent nanomaterial from chemically modified graphene oxide (CMGO) or chemically modified graphene (CMG), has attracted extensive research attention in the last few years due to its outstanding chemical, optical and electrical properties. To further extended its potential applications as optoelectronic devices, solar cells, bio and bio-sensors and so on, intensive research efforts have been devoted to the CMG. However, the CMG, a suspension of aqueous, have problematic since they are prone to agglomeration after drying a solvent. In this study, we synthesized the GQDs from graphite and deposited on silicon substrate by kinetic spray. The photo luminescent properties of deposited GQD films were analyzed and compared with initial GQDs suspension. In addition, its carbon properties were investigated with GQDs solution properties. The properties of deposited GQD films by kinetic spray were similar to that of the GQDs suspension in water. We could provide a pathway for silicon-based silicon based device applications. Finally, the well-adjusted GQD films with photo luminescence effects will show Energy-Down-Shift layer effects on silicon solar cells. The GQD layers deposited at nozzle scan speeds of 40, 30, 20, and 10 mm/s were evaluated after they were used to fabricate crystalline-silicon solar cells; the results indicate that GQDs play an important role in increasing the optical absorptivity of the cells. The short-circuit current density (Jsc) was enhanced by about 2.94 % (0.9 mA/cm2) at 30 mm/s. Compared to a reference device without a GQD energy-down-shift layer, the PCE of p-type silicon solar cells was improved by 2.7% (0.4 percentage points).

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.2
• /
• pp.171-179
• /
• 1997

During the day time in summer, peak of air conditing load, and electric power management system lies under overloaded condition. The reason is the enlarged peak load value of electric power caused by increased air-cooling load in summer. To prevent load concentration during day time and overloaded condition of power management system, some energy storage methods are suggested. One of these methods is ice storage system. Water has some good properties as P.C.M.(Phase Chang Material) : Its melting point is the range of required operation temperature. It has large specific latent heat and is chemically stable compared to other organic or inorganic substances. It is cheap and easy to treat. This study represents experimental results of heat transfer characteristics of P.C.M. under the outward melting process in a vertical cylinder. We experimented with twelve combinations of conditions, i.e., three different inlet temperatures($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$), two working fluid directions(upward and downward), and two aspect ratios, H/R(4 and 2). At the inlet temperature of $7^{\circ}C$ and $4^{\circ}C$, there was temperature stagnation region where the temperature of P.C.M. remains constant at $4^{\circ}C$ regardless of aspect ratio and direction of working fluid. This temperature stagnation occurs as the water, at its maximum density, flows down to the lower region. The phase change interface formed bell-shaped curve as the melting process continued. With a new set of conditions(4H/R, inlet temperature $4^{\circ}C$ and $1^{\circ}C$, downward/upwerd inlet direction), the movement of phase change interface was faster when the working flued inlet direction was downward. With the same set of conditions, melting rate and total melting energy were larger when the working fluid inlet direction was downward. The results were reversed when the other sets of conditions were applied.

• Journal of Nutrition and Health
• /
• v.51 no.5
• /
• pp.369-378
• /
• 2018

Purpose: Obesity is associated with a dysregulation of metabolic balance and is regarded as a low grade chronic inflammation. Western-style diet and physical inactivity are leading causes of obesity. This study examined the profiles of forty plasma cytokines and chemokines at the same time in the early stages of high-fat diet-induced obesity using a mouse model. Methods: A total of 30 male CD1 mice, 12 ~ 14 weeks of age, were enrolled. The mice were fed a high-fat diet for 6 weeks to induce obesity. The plasma glucose and triglyceride concentrations were measured using a hexokinase colorimetric assay kit and a serum triglyceride determination kit, respectively. The relative levels of multiple cytokines and chemokines in the plasma were determined using a mouse cytokine array kit. Results: The mice exhibited significant weight gain after 6 weeks of a high-fat diet. The genital fat depot was enlarged along with an increase in the number and the mean size of white adipocytes as early as 4 weeks after a high-fat diet. In addition, the plasma glucose and triglyceride levels increased significantly after 4 weeks of a high-fat diet. Cytokine array analysis revealed a remarkable increase in the expression of both CXCL12 and CXCL13, whereas the proinflammatory cytokines remained low after 4 weeks of a high-fat diet. Conclusion: A significant increase in plasma levels of CXCL12 and CXCL13 was observed after 4 weeks of a high-fat diet, which might induce the migration of B lymphocytes, T lymphocytes, and monocytes from the blood to expanding adipose tissue or fat associated lymphoid clusters, playing a key role in adipose tissue remodeling and local immunity during the early stages of high-fat diet-induced obesity.

• Microbiology and Biotechnology Letters
• /
• v.26 no.6
• /
• pp.515-522
• /
• 1998

Plant root rotting fungi, Fusarium solani are suppressed their growth by the chitinase which is produced from the antagonistic soil bacteria. The chitinase producable antagonistic bacterium Pseudomonas sp. 3098 was selected as a powerful biocontrol agent of F. solani from ginseng rhizosphere. The antagonistic Pseudomonas sp. 3098 was able to produce a large amount of extracellular chitinase which is key enzyme in the decomposition of fusarial hypal walls. The chitinase was purified from cultural filtrate of Pseudomonas sp. 3098 by the procedure of ammonium sulfate precipitation, anion exchange chromatography, gel filtration on Bio-Gel P-100, and 1st and 2nd hydroxyapatite chromatography. The molecular mass of the purified enzyme was ca. 45 kDa on SDS-FAGE. The optimal pH and temperature for the activity of purified chitinase were 5.0 and 45$^{\circ}C$, respectively. The enzyme was stable in pH range of 5.0 to 9.0 up to 5$0^{\circ}C$ The enzyme was significantly inhibited by metal compounds such as FeCl$_2$, AgNO$_3$ and HgCl$_2$, and was slightly inhibited by p-CMB, iodoacetic acid, urea, 2,4-DNP and EDTA. The enzyme had ability of digestion on colloidal chitin and chitin from shrimp shell, but could not digest chitosan and chitin from crab shell. Km value of the enzyme was 0.11% on colloidal chitin, and the maximum hydrolysis rate of the enzyme was 34% on colloidal chitin.

• Research in Plant Disease
• /
• v.9 no.3
• /
• pp.153-158
• /
• 2003

Mycological characteristics of Phomopsis citri isolates obtained from blighted twigs of citrus cultivation areas in Jeju island were all identified as Phomopsis citri known as the anamorph stage of Diaporthe citri. Pycnidia the isolates sized from 112.2 to 614.4${\mu}m$ (av. 328.8${\mu}m$) and shaped conical to lenticulata in black. Two types of phialospores, ${\alpha}$-and ${\beta}$-spores were observed from pycnidia. The ${\alpha}$-spores were hyaline, unicellula, fusiform to ellipsoidal and sized 4.7~8.7 1.9 ${\times}$ 3.5${\mu}m$ (av. 6.7 ${\times}$ 2.3 ${\mu}m$). The ${\beta}$-spores were hyaline, unicellula, filiform, curved and often strongly hooked and sized 13.2~27.1 ${\times}$ 0.8~1.6 ${\mu}m$ (av. 22.1 ${\times}$ 1.0 ${\mu}m$). All isolates grew well and produced abundant pycnidia and spore horns on PDA. In addition, all isolates showed strong pathogenicity to citrus fruit inducing melanose symptoms when artificially inoculated with the pycnidial spores.

• The korean journal of orthodontics
• /
• v.38 no.5
• /
• pp.337-346
• /
• 2008

Objective: The purpose of this study was to determine whether an exogenous electric current to the alveolar bone surrounding a tooth being orthodontically treated can enhance tooth movement in human and to verify the effect of electric currents on tooth movement in a clinical aspect. Methods: This study was performed on 7 female orthodontic patients. The electric appliance was set in the maxilla to provide a direct electric current of $20{\mu}A$. The maxillary canine on one side was assigned as the experimental side, and the other as control. The experimental canine was provided with orthodontic force and electric current. The control side was given orthodontic force only. Electrical current was applied to experimental canines for 5 hours a day. The amount of canine movement was measured with an electronic caliper every week. Results: The amount of orthodontic tooth movement in the experimental side during 4 weeks was greater by 30% compared to that of the control side. The amount of increase in tooth movement in the experimental side was statistically significant. The amount of tooth movement in the experimental side during the first two weeks was !Bleater than that in the following two weeks. The amount of weekly tooth movement in the control side was decreased gradually. Conclusions: These results suggested that the exogenous electric current from the miniature electric device might accelerate orthodontic tooth movement by one third and have the potential to reduce orthodontic treatment duration.