• 제목/요약/키워드: 김동인

검색결과 133건 처리시간 0.023초

동북아시아 국가 다국적기업의 글로벌공급사슬관리의 동인과 정보기술과의 상호작용 효과에 관한 비교연구 (Interaction Effects on Global Supply Chain Management and Information Technology of MNCs in East-Asia Countries)

  • 김석수
    • 한국철도학회논문집
    • /
    • 제9권6호
    • /
    • pp.664-670
    • /
    • 2006
  • This Research aims to analyze the effects of SCM management capabilities and IT capabilities on firm performance. The strategic performance was shown to be positively and significantly affected by flexibility and responsiveness which were proxies for SCM management capabilities. However, neither main effect of IT capability nor interaction effects of IT capability and SCM management capability on firm performance was found.

PDP 벽전압 전달곡선을 이용한 방전특성에 대한 연구 (A study on electric discharge characteristics using transfer curve of PDP wall voltage)

  • 김동인;지영승;김영조
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
    • /
    • pp.214-217
    • /
    • 2004
  • 현재 PDP는 차세대 대형 평판 표시장치로서 각광을 받고 있으며 빠른 속도로 개발이 진행되고 있다. AC PDP에서 가장 큰 문제는 위도 및 방전효율의 향상과 전력손실의 저감, 높은 contrast의 실현, 제품 가격의 저하 등에 관한 문제이다. 본 연구에서는 벽전압 전달곡선을 이용한 방전 동작 특성에 대해 고찰하고자 한다. 방전 유지전압 주파수가 변화할 때 방전 개시전압이 감소하나 메모리 마진은 거의 동일함을 보였다. Duty 비를 변화시키면 방전개시전압은 감소하는 경향이 있지만 방전유지전압은 거의 일정하였다.

  • PDF

페로브스카이트 태양전지의 효율 및 광학적 특성 향상을 위한 유리 표면 식각

  • 김동인;남상훈;황기환;이용민;서현진;유정훈;최현지;이율희;부진효
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.250.1-250.1
    • /
    • 2015
  • 광학적 특성 중 광 포집 (Light trapping)을 향상시키기 위해 표면의 거칠기 및 형태를 변화시킬 수 있는 방법으로 유리 텍스쳐 방법을 적용시키는 연구가 최근에 많이 진행되고 있다. 본 연구에서 광 포집 및 전류밀도 향상을 위해 페로브스카이트 태양전지의 상부전극에 적용 하였다. 본 연구에서 FTO 기판 후면의 유리 부분을 희석된 HF 용액을 사용하여 습식화학공정을 진행 하였다. 이때 텍스쳐 시간을 조절하여 실험을 진행하였으며, 박막의 광 산란 및 포집 특성을 조절 하였습니다. 텍스쳐된 유리기판을 페로브스카이트 태양전지에 적용 하였을 때, 광 산란 및 포집 효과로 인하여 전류밀도와 효율이 증가됨을 확인하였다. 이러한 유리 텍스처 처리는 다양한 태양전지 구조에 이용될 수 있다.

  • PDF

국제 표준 LTE-Advanced에서 논의되고 있는 Heterogeneous Network 관련 Interference Management 기술

  • 양정렬;진미성;김동인
    • 정보와 통신
    • /
    • 제28권8호
    • /
    • pp.10-17
    • /
    • 2011
  • 3GPP($3^{rd}$ Generation Partnership project)는 3세대 이동통신인 UMTS(Universal Mobile Telecommunication System)의 초기 표준화 이후 HSPA(High Speed Packet Access), MBMS(Multimedia Broadcast Multicast Service) 등의 기술 개발로 UMTS시스템을 지속적으로 발전시켜 왔다. 그리고, 최근 새로운 무선 접속 기술을 기반한 LTE(Long Term Evolution)시스템에 대한 표준화를 완료하고 ITU-T(International Telecommnunications Union-Radio)의 IMT-Advanced 요구사항을 만족하는 LTE-Advanced 시스템에 대한 연구를 진행하고 있다. 한편 LTE-Advanced 표준의 목표인 무선 전송속도를 한층 더 높이고, 단위비용(cost per bit)을 더욱 낮추고, 셀 커버리지 및 용량을 확대하기 한 저출력의 피코셀, 펨토셀, 무선중계기들을 이용하여 실내외의 소규모 영역을 서비스하도록 하는 heterogeneous network에 대한 국제 표준이 활발히 논의되고 있다. 그러나 여러 셀이 혼재하는 경우 셀들간의 신호 간섭이 발생하여 사용자의 통신 품질이 크게 저하될 우려가 있다. 본 고에서는 heterogeneous network 와 관련하여 국제 표준 LTE-Advanced에서 논의되고 있는 간섭 제어 기법에 대해 소개한다.

치아 플라그 인덱스 도출 및 데이터베이스 구성 (A New Method of Plaque Scoring and Database Implementation)

  • 신승원;김경섭;이선주;김동인;김기덕;박원서
    • 전기학회논문지
    • /
    • 제58권6호
    • /
    • pp.1200-1206
    • /
    • 2009
  • In this study, a new method of dental plaque scoring is proposed by adopting new criteria to divide the tooth surface with utilizing the geometrical features of a tooth color image. For the possible clinical usage of our new plaque scoring system, GUI(Graphic User Interface) system is also implemented to estimate the numerical plaque index for a specific tooth by designing the supplementary database management module that handles dental plaque scores.

축소기초모델개념을 이용한 공기윤활 슬라이더 베어링의 최적설계 (An Optimization of Air-Lubricated Slider Bearings Using the Reduced Basis Concept)

  • 윤상준;김동인;강태식;정태건;최동훈
    • 대한기계학회논문집A
    • /
    • 제27권3호
    • /
    • pp.343-348
    • /
    • 2003
  • In this study, optimum designs of the air-bearing surface (ABS) are achieved using the reduced basis concept which can effectively reduce the number of design variables without cutting down on the design space. Even though the optimization method is easier and more applicable to handle than the trial-and-error method, its efficiency is largely dependent on the number of the design variables. Hence, the reduced basis concept is applied, by which the desired design can be defined as a linear combination of basis designs. The simulation results show the effectiveness of the proposed approach by obtaining the optimum solutions of the sliders whose target flying heights are 25, 20, and 15nm.

집중형 DS/SSMA 무선 패킷통신망을 위한 RA-T 대역확산 전송방식의 성능 (Performance of RA-T spread-spectrum transmission scheme for centralized DS/SSMA packet radio networks)

  • 노준철;김동인
    • 전자공학회논문지A
    • /
    • 제33A권6호
    • /
    • pp.11-22
    • /
    • 1996
  • We address an issue of channel sharing among users by using a random assignment-transmitter-based (RA-T) spread-spectrum transmission scheme which permits the contention mode only in the transmission of a header while avoiding collision during the data packet transmission. Once the header being successfully received, the data packet is ready for reception by switching to one of programmable matched-filters. But the receoption may be blocked due to limited number of matched-filters so that this effect is taken into account in our analysis. For realistic analysis, we integrate detection performance at the physical level with channel activity at the link level through a markov chain model. We also consider an acknowledgement scheme to notify whether the header is correctly detcted and the data packet can be processed continuously, which aims at reducing the interference caused unwanted data transmission. It is shown that receiver complexity can be greatly reduced by choosing a proper number of RA codes at the cost of only a little throughput degradation.

  • PDF

축소기초모델개념을 이용한 공기윤활 슬라이더 베어링의 최적설계 (An Optimization of Air-Lubricated Slider Bearings by Using Reduced Basis Concept)

  • 김동인;윤상준;강태식;정태건;최동훈
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 추계학술대회논문집 I
    • /
    • pp.52-57
    • /
    • 2001
  • In this paper, the optimum designs of air-bearing surface(ABS) are achieved effectively by using reduced basis concept which can reduce the number of design variables although the design space is distended. Generally, the optimization method is more effective than the trial and error. However, the efficiency of the former is largely dependent on the number of the design variables. In order to reduce the number of design variables and increase the efficiency, reduced basis concept is applied. We can define the desired design as a linear combination of basis designs using this concept. From this optimization method with reduced basis concept, we easily obtain the optimum designs of ABS whose target flying heights are 25, 20, 15 nm.

  • PDF

액티브 네트워크 노드의 다중 수행환경을 제공하기 위한 기법 연구 (Study on method to provide multiple Execution Environment to nodes over Active Network)

  • 김동인;이병기;조국현
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 1999년도 가을 학술발표논문집 Vol.26 No.2 (3)
    • /
    • pp.575-577
    • /
    • 1999
  • 액티브 네트워크는 사용자의 급변하는 다양한 요구에 대응할 수 있는 서비스 중심의 네트워크이다. 기존의 네트워크가 단순한 패킷 전달의 역할만을 담당했다면, 액티브 네트워크 사용자가, 제공되는 망의 서비스외에 필요한 다른 서비스를 구성, 설치함으로서 학문적 또는 상업적으로 좀 더 능동적으로 망을 사용할 수 있게 해준다. 이러한 액티브 네트워크에서 기존의 제공 서비스들(패킷 전달, 라우팅, 전자메일 등)과 함께, 사용자 혹은 망 관리자가 제공하는 서비스들이 공존하기 위해서는 망에 다양한 수행환경(Execution Environment)이 존재해야 한다. 본 논문에서는 액티브 네트워크상의 노드들에 위치하는 다양한 수행환경을 구성하고, 이를 관리하는 기법과 다중 수행환경을 이용한 다중 가상 네트워크에 대해, 현재 시도되고 있는 실 예들을 분석하여 보고, 효율적인 수행환경 구성을 위한 조건을 제시한다.

  • PDF