• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.246-246
• /
• 2010

In this study, the effect of wast heat-electric energy conversion according to temperature difference between two sides of a thermoelectric module was investigated as a way of electric energy conversion from waste heat generated in machinery system like automobile system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.369-369
• /
• 2010

소자제조 공정의 질과 생산성을 향상시키기 위하여 플라즈마 감시가 필요하다. 본 연구에서는 광반사분광기(Optical Emission Spectroscopy)를 이용하여 소스전력의 변화에 따른 플라즈마 상태 데이터를 수집하였다. 수집된 데이터를 이용한 시계열 신경망 감시 모델을 개발하였으며, 개발된 모델과 CUSUM(Cumulative Sum Control Chart)를 결합하여 플라즈마의 이상 상태를 실시간으로 감시하는 기법을 개발하였다. 매우 우수한 감시 성능을 확인할 수 있었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.9
• /
• pp.677-681
• /
• 2013

Apart from the deposition of alignment layer, alignment process needs to be involved for alignment of liquid crystal (LC) molecules. To simplify manufacturing process, several method were used such as rubbing, ion-beam irradiation, UV irradiation, and lithography. But, eventually it needs another treatment for LC alignment. Here, we suggested Si induced polyimide (PI) alignment layer at low temperature. Using this method, we are able to eliminate the alignment process and found that the alignment and electro-optic performance are much better than that of the rubbed PI LC cells. Compared to the rubbed PI cells, the response time was decreased by 70% and C-V characteristics have hysteresis-free.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.371-374
• /
• 2006

The objective of this study is to determine the influence of free-stream turbulent intensity on the three-dimensional turbulent flow in a linear turbine cascade. The range of free-stream turbulence intensity considered is 0.7~10%. This study was performed numerically. The results show that the mass averaged loss coefficient increased according to the increase of free-stream turbulence intensity due to increased value of the mass averaged total pressure loss coefficient which was higher than the decreased value of the mass averaged secondary flow loss coefficient. The loss coefficient distribution was changed suddenly at a free-stream turbulence intensity of 10% while the loss coefficient distribution was rarely changed at a lower free-stream turbulence intensity of 5%.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.179-182
• /
• 2003

This paper proposes a new stereo matching algorithm using both the divide-and-conquer method and the DSI(Disparity Space Image) technique. Firstly, we find salient feature points on the each scanline of the left image and find the corresponding feature point at the right image. Then the problem of a scanline is divided into several subproblems. By this way, matching of the subintervals is implemented by using the DSI technique. The DSI technique for stereo matching process is a very efficient solution to find matches and occlusions simultaneously and it is very speedy. In addition, we apply three occluding patterns to process occluded regions, as a result, we reduce mismatches at the disparity discontinuity.

• 한국벤처창업학회:학술대회논문집
• /
• 2009.10a
• /
• pp.155-182
• /
• 2009

본 연구는 조직공정성과 조직문화유형이 조직유효성에 미치는 영향을 관찰하고자 하였다. 또한 개인의 집단주의 성향이 조직공정성, 조직문화유형과 조직유효성간의 관계를 어떻게 조절하는지의 여부에 대한 실증적 분석을 통하여 전문건설업체 현장 관리자의 조직유효성을 증진시키기 위한 실천적 방안을 도출 제시하기 위하여 설계되었다. 구체적인 연구결과를 요약하면 다음과 같다. 첫째, 조직공정성이 조직유효성에 미치는 영향에 관한 가설검정의 결과는 유의한 영향을 미치는 것으로 나타났다. 또한, 조직문화가 조직유효성에 미치는 영향에 관한 가설검정의 결과는 유의한 영향을 미치는 것으로 나타났고, 직급과 직종에 따라 조직공정성, 조직문화유형, 조직유효성에 대한 인식 차이에 관한 가설검정의 결과도 모두 유의적인 것으로 검정되었다. 둘째, 개인의 집단주의 성향이 조직공정성과 조직유효성간의 관계, 조직문화유형과 조직유효성간의 관계를 어떻게 조절하는지에 관한 가설검정도 모두 유의하지 못하여 기각되었다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.154-157
• /
• 2003

Precision displacement of less than a few nm resolution was measured in real-time using fiber optic EFPI sensor. The novel method for real-time processing of analyzing EFPI output signal was developed and verified. Linearity in the mean values of interferometric light intensity among adjacent fringes was shown, and the sinusoidal approximation algorithm that estimates past and coming fringe values was verified through the linearity. Real-time signal processing program was developed, and the intensity signal of the EFPI sensor was transformed to the phase shift with this program. The resolution below 0.4 ~ 10 nm in the displacement range of $0 ~ 300\mu\textrm{m}$ was obtained by reducing the photodetector noise using low-pass filter and signal averaging. The nano-translation stage with a Piezo-electric actuator and the EFPI sensor system was designed and tested. This stage successfully reached to the desired destination in $15\mu\textrm{m}$ range within 1 nm accuracy.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.151-154
• /
• 2002

The objective of this study is to find the change of signal characteristics of matrix cracks due to the different specimen shapes. As the concept of the smart structure, monitoring of acoustic emission (AE) can be applied to inspect the fracture of the structures in operating condition using built-in sensors. To understand the characteristics of matrix crack signals, we performed tensile tests by changing the thickness and width of the specimens. This paper describes the implementation of time-frequency analysis such as wavelet transform (WT) fur the quantitative evaluation of fracture signals. The experimental result shows the distinctive signal features in frequency domain due to the different specimen shapes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.5
• /
• pp.670-676
• /
• 2008

A diesel engine requires a high Performance of lubrication because of the extreme conditions such as high temperature and pressure during combustion process in a cylinder. Many researches to improve the lubrication performance on the extreme condition have been executed. The lubricant oil suspended with nano-metal particles is the one of the measure. In this study, the nano-lubricant oil is applied on a commercial diesel engine, and the engine performance is tested. The results show the increase of maximum torque and the decrease of cylinder pressure, exhaust gas temperature, CO emission.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1195-1198
• /
• 2003

Micro former has been known as a useful tool for machining micro parts. It makes micro holes automatically with punches, a hole-shape die and material by rotation of crank shaft synchronously. Micro displacement in micro forming affects on the performance of machining because micro forming size is similar with its mechanical displacement. Therefore, the measurement of this micro displacement is essential to be guaranteed to obtain high forming precision in the whole machine as well as its devices. This paper addresses the development of a laser interferometer to measure micro displacement for a micro former. The laser interferometer is able to measure micro displacement during a few micro seconds with non-contact. For the experiment, a laser probe is installed on the optical table with optical devices and a micro displacement generating device. The velocity decoding board is also added to calculate doppler shift frequency directly. Finally simple experiments are conducted to confirm its functional operation.