• Journal of Chest Surgery
• /
• v.29 no.1
• /
• pp.59-62
• /
• 1996

Chemical pleurodesis with doxycycline has been used during video-assisted thoracoscopic surgery (VATS) as an auxiliary method to enhance therapeutic goal in patients with pneumothorax. However, the therapeutic effect of doxycycline pleurodesis (DP) has not been clearly defined yet. To evaluate the effect of DP, we compared two groups of patients who were given VATS bullectomy from October 1993 to June 1995. Group I composed of 21 patients who received DP and group II composed of 20 patients who did not received DP Doxycycline 500mg with saline 200ml were instilled into the pleural cavity upon a completion of bullec omy, and retained there for 0.5-1 hour and then drained out. The age of group I was 30.9 $\pm$ 20.0 and that of group II was 24.3 $\pm$ 9.49 years. Male to female ratio was 20: I in group I and 20 : 0 in group II. The postoperative indwelling time of chest tube was 5.86 $\pm$ 4.69 days in group I and 3.80 $\pm$ 2.28 days in group II. Seven patients had more than 100m1/day of chest tube drainage on the postoperative third day in group I compared to one patient in group II. Five patients had postoperative indwelling time of chest tube greater than 7 days in group I compared to two in group II. The number of patients who had postoperative fever were 3 in both group, analgesic requirements were 2.19 $\pm$ 2.77 amples in group I and 2.30 $\pm$ 1.95 ambles in group II. Follow-up was done from 2 months to 16 months after surgery. During the follow up periods, four patients had recurrence 2 (9.5%) in group I and 2 (10%) in group II. We conclude that concomitant doxycycline pleurodesis with video-assisted thor coscopic bullectomy In patients with pneumothorax is not necessary.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1521-1522
• /
• 2011

뇌임펄스에 의한 절연유체 내 절연파괴 현상은 스트리머 채널에서의 유체유동과 기체유동이 동시에 발생한다. 스트리머 개시와 동시에 발생하는 기포들은 절연파괴에 직접적인 영향을 미치며 이를 모의해석하기위해서 2상유동이 고려되어야한다. 2상유동이 고려된 뇌임펄스 응답 유한요소해석은 전계에 의한 푸아송 방정식과 전자, 양이온, 음이온에 대한 전하연속방정식으로 구성되며 전계 방출과 열전자 방출효과를 경계조건으로 부여하였다. 기체 전리현상은 타운젠트 이론을 도입하였으며, 유체 전리현상은 제너 이온화 모델을 도입하여 수학적 모델링을 통한 2상유동으로 결합하였다. IEC standard #60897의 표준규격에 따라 침-구형 전극을 설계하였고 2차원 축대칭 간략화모델에 적용하여 실험적 결과와 비교분석함으로써 신뢰할 수 있는 수치해석기법이 제시되었다.

• Korean Journal of Food Science and Technology
• /
• v.18 no.2
• /
• pp.93-97
• /
• 1986

Dried barley moodle was made with the addition of gelatinized corn flour as binder by using piston type noodle piston press, in which the temperature was kept below the temperature of protein denaturation. The evacuation of air bubble from the dough strengthened the wet noodle strands and improved the cooking quality of the dry noodle. Although the binder was indispensable, the addition should be less than 20%, because the gelatinized corn flour increased the turbidity of the cooking water. Kneading with 3% solution of soy protein resulted in improvement of the noodle's cooking quality.

• Water for future
• /
• v.13 no.4
• /
• pp.51-59
• /
• 1980

본 논문에 있어서 오염물질의 분산현상에 관한 해석은 활류의 전단효과에만 의존해온 과거의 연구와는 달리, fingering 현상과 2차류의 특성과의 관계로 고찰하는 것이 본 연구의 목적이다. finering 현상의 발달과정과 일반적인 제인자들을 결정하기 위해서, 횡방향속도분포와 속도변동은 taft법과 수색기포법에 의해서 측정하였고, 특히 농도의 유하상태는 laser-beam System을 사용해서 명확하게 측정하였다. 이 현상은 유동모델에 의한 2차류를 고려하므로써 명백하게 설명 할 수 있었다. 그 결과, 분산계수는 활류구조와 함께 단면내 2차류에 의해서도 강한 영향을 받는 것이 구명되었다. 또, 분산계수와 2차류와의 관계는 시행적으로 (5)식을 제시하였고, 한편 실용적으로는 유속, 수색, 수로폭, 조도등의 제수리량을 고려한 실험식 (8)을 제안하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1992.11a
• /
• pp.44-49
• /
• 1992

액체를 취급하는 기계.장치는 유속 및 회전속도 등이 빠르게 되면 유체충격과 정압의 저하에 따른 국부적 비등으로 인해 캐비테이션(cavitation) 현상이 발생한다. 이러한 캐비테이션현상에 따른 소음과 진동율 초래하고, 또한 기포의 붕괴에 따른 형격압으로 캐비테이션-침식(cavitation-erosion)이 발생하여 기계.장치의 구성재료에 손실이 일어남으로써 이들 기계의 효율을 저하시킴과 아울러 수명을 단종시킬 수 있다. 더욱이 부식성의 액체에 사용되는 기계.장치의 금속재료에는 캐비테이션(erosion-corrosion)이 중첩하여 발생하는 경우는 침식과 부식이 상호간에 가속하는 상승효과 때문에 기계.장치의 수명에 치명적인 영향을 미친다. 따라서 본 연구에서는 초음파 진동장치에 의한 각종 유중에서 베어링 합금 1종, 7종 및 켈-멧 4종에 대한 캐비테이션-침식실험을 실시하여, 침식손상거동및 특성등을 구명하고저 하였다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.241-242
• /
• 2017

본 논문에서는 폐유리를 재활용하는 발포유리에 대한 기술 및 활용방법에 대한 고찰을 통해 국내에서 적용 가능한 폐유리 재활용기술에 대하여 검토하였다. 폐유리를 재활용한 발포유리는 폐유리를 분쇄한 유리 미분에 규산나트륨, 탄산칼슘, 그라파이트 등의 발포제를 첨가하여 형틀에 넣고 가열을 하면, 유리분말은 소결(sinter)상태가 되는 약 $800^{\circ}C$ 정도가 되면 녹기 시작하고, 발포제는 분해되어 $O_2$와의 반응에서 발생하는 $CO_2$ 가스에 의한 기포가 발생하여 발포유리가 형성되는 제조 방식이다. 이러한 발포유리 방식으로 제작된 판재 및 배관 형태의 불연재료는 건설 및 LGN선박용으로 널리 활용되고 있고, 인공경량 골재의 형태는 건설용 채움재 및 빗물 저류용, 정화용으로 활용되고 있다. 이러한 활용 방식은 국내에서도 충분히 적용 가능한 방식이며, 국내에서의 적용을 통해 폐기물 및 환경부하 저감 효과를 높일 수 있다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.257-262
• /
• 2004

A series of preliminary model tests are performed to find out the wave attenuating effect of the pneumatic breakwater of environment friendly type, which is a bubble screen generated by releasing compressed air from a submerged multiple parallel manifold Rising bubbles induce vertical current, which produces horizontal currents flowing away from the bubble-screen area in both directions. Near bottom, the corresponding currents flow toward the bubble screen, thus completing the circulation pattern. The surface current moving against the direction of wave propagation causes some attenuation of the waves. It becomes more effective as the relative depth (d/ L) increases (short-period waves in deep water). With the same air-discharge, the multiple parallel manifold can be more effective for the attenuation of longer waves through optimum arrangement of manifold number. installation depth, manifold gap, etc. The pneumatic breakwater will give a wide utilization as a device for protecting harbor facilities and as a simple, mobile breakwater.

• Korean Journal of Food Science and Technology
• /
• v.20 no.5
• /
• pp.637-643
• /
• 1988

The useful life of frying oil was increased by treating the frying oil with a composited powder comprising water, citric acid and porous rhyolite carrier. The color darkening and foaming tendency of the oil during frying operation was apparently retarded. Increase rates of polar lipid components, dielectric constant and formation of the conjugated dienes and trienes of the used frying oil were reduced to two thirds of the oil without treatment during 84 hr frying operation. Iodine value and polyenoic index was also much less decreased by treatment. The treatment, however, have no significant effect to inhibit the decrease of smoke point and the increase of viscosity.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.760-769
• /
• 1993

Solvent-free low foaming scouring agents(LFSA) were prepared by blending of polyoxyethylene(30) octadecylbenzylammonium chloride(POAC), block copolymer of propylene oxide-ethylene oxide[p(PO-b-EO) glycol], Sedlan FF-200(FF-200) and sulfonic acid-amine condensate of polyoxyethylene(10) nonylphenyl ether(PSAC). In consequence of several tests, FF-200/POAC/p(PO-b-EO) glycol/PSAC/water (20g/10g/5g/5g/60g) mixture (LFSA-5) showed good cleaning power, penetrating ability, emulsifiability and stability to alkali, and gave less problem in water pollution. Scouring effect of LFSA-5 was investigated by the change of percentage of exhaustion before and after scouring at various dyeing temperatures. The percentage of exhaustion of the unscoured PET fabric was 4.5% at $70^{\circ}C$, while that scoured with LFSA-5 was 1.3% at the same temperature, which proved LFSA-5 to be a good scouring agent. Moreover, the foaming power of LFSA-5 measured by Ross and Miles method was 6mm foam height immediately after foaming, and that measured by Ross and Clark method was less than 300mm foam height at $30^{\circ}C$, and 20mm at $80^{\circ}C$. As a result, LFSA-5 proved a good low foaming scouring agent.

• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.8-14
• /
• 2013

This research is to evaluate the fire extinguishing performance at a mixing ratio of pressurized air in the fire extinguishing system of compressed air foam (CAF) which injects compressed air into foam liquid and then discharging. The experimental device is made use of exclusive foam extinguishing facility for compressed air foam that is produces based on Canada National Laboratory and UL 162 standard, apply model of oil fire (B Class) 20 unit in accordance with "Standard of Model Approval and Product Inspection for Fire Extinguishing Agent" to the fire Extinguishing model. Compressed air is injected through the air mixture and study the tendency depending on increasing air foam ratio 1 : 4, 1 : 7, 1 : 10. In addition, the comparison experiments between synthetic surfactants foam and AFFF carry out with it at the air foam ratio 1 : 4. As a result, in the condition of same discharging flow, fire extinguishing effect of AFFF is the fastest at the air foam ratio 1 : 7 and the slowest at 1 : 10. Moreover, the fire extinguishing effect of AFFF in the comparison expeiments between AFFF and synthetic surfactants foam is faster than the other.