기포콘크리트의 재료 중 시멘트는 제조과정 중에 $CO_2$를 다량 발생시키기 때문에 지구 환경적인 측면에서 커다란 문제가 되고 있지만, 아직까지 시멘트를 대체할 수 있는 대체재에 대한 연구 개발이 미흡한 실정이다. 또한, 발포제는 압축강도가 낮고 고가인 단점이 있다. 이 때문에 강도와 경량 등의 성능 개선과 친환경적인 재료의 사용이 필요한 실정이다. 이에 본 연구에서는 시멘트와 발포제를 대체하기 위해 고로슬래그와 제지애시를 사용하여 경량 경화체를 제조하고자 하였으며, 강도 및 경량성을 보완하기 위해 플라이애시와 폴리실리콘 슬러지를 사용하여 실험을 실시하였다. 그 결과, 플라이애시를 사용한 경화체는 Plain 보다 낮은 밀도를 나타내었으나 강도보완에는 취약하였으며, 폴리실리콘 슬러지를 사용한 경우는 3%치환한 경화체가 압축강도는 Plain보다 다소 낮지만 겉보기 밀도의 감소가 큰 것으로 나타났다.
석탄화력 발전소에서 발생하는 수백만 톤의 석탄회는 콘크리트 혼화재 및 건축자재로 재활용이 가능함에도 불구하고 과다한 미연탄소 함량으로 인해 대부분 회사장(Ash Pond) 되는데, 이로 인해 환경오염유발, 회사장 포화에 따른 발전소의 수명 감소, 그리고 재활용 가능한 자원의 낭비와 같은 문제가 발생한다. 본 연구는 석탄회 내의 미연탄소분을 분리하여 미연탄소분 함량이 낮은 고순도 석탄회를 회수하기 위해 직류관 믹서(In-Line Mixer) 발생기키는 역류형 컬럼부선기를 이용하였다. 이때 입자 표면에 소수성의 특성을 강화시키는 포스제의 증가에 따른 석탄회와 미연탄소 입자의 분리 특성을 분석하였다. 석탕회 톤당 8ι의 포수제를 사용한 역류형 컬럼 부선기를 이용하여 미연탄소분 함유량이 7%인 석탄회를 분리 실험한 결과 미연탄소분 함유량 0.5%인 고순도 석탄회를 88.2% 회수하였다. 그리고 질량 평균입경이 21.2$mu extrm{m}$인 석탄회를 분리 실험하여 입도를 분석한 결과 분리 정도에 따라 입도는 뚜렷하게 구별되어 나타났는데, 분리효율이 증가할수록 정제 석탄회의 경우 입도는 조대해져 입도 분포의 양극화 현상이 뚜렷하게 나타났다. 포수제의 투입량이 증대함에 따라 미연탄소 입자의 계면에 소수성이 강화되어 분리 특성이 향상되었으며, 이때 회수한 고순도 석탄회의 입도는 미세화 되는 경향이 나타났다.
PURPOSES : The use of roller-compacted concrete pavement (RCCP) is an environmentally friendly method of construction that utilizes the aggregate interlock effect by means of a hydration reaction and roller compacting, demonstrating a superb structural performance with a relatively small unit water content and unit cement content. However, even if an excellent structural performance was secured through a previous study, the verification research on the environmental load and long-term durability was conducted under unsatisfactory conditions. In order to secure longterm durability, the construction of an appropriate internal air-void structure is required. In this study, a method of improving the long-term durability of RCCP will be suggested by analyzing the internal air-void structure and relevant durability of roller-compacted concrete. METHODS : The method of improving the long-term durability involves measurements of the air content, air voids, and air-spacing factor in RCCP that experiences a change in terms of the kind of air-entraining agent and chemical admixture proportions. This test should be conducted on the basis of test criteria such as ASTM C 457, 672, and KS F 2456. RESULTS : Freezing, thawing, and scaling resistance tests of roller compacted concrete without a chemical admixture showed that it was weak. However, as a result of conducting air entraining (AE) with an AE agent, a large amount of air was distributed with a range of 2~3%, and an air void spacing factor ranging from 200 to $300{\mu}m$ (close to $250{\mu}m$) coming from PCA was secured. Accordingly, the freezing and thawing resistance was improved, with a relative dynamic elastic modulus of more than 80%, and the scaling resistance was improved under the appropriate AE agent content rate. CONCLUSIONS : The long-term durability of RCCP has a direct relationship with the air-void spacing factor, and it can be secured only by ensuring the air void spacing factor through air entraining with the inclusion of an AE agent.
The purpose of this study was to analyze factors influencing insulation performance of inorganic Autoclaved Lightweight Concrete(ALC) sandwich wall panels with the application of shear connectors. To analyze the effect of shear connectors on the thermal performance of sandwich wall panels, heat transfer analysis was conducted by using the three-dimensional heat transfer simulation software. Four types of shear connector such as Pin, Clip, Grid, and Truss were selected for insulation performance analysis. Thermal bridge coefficient was calculated by varying typical panel thickness and shear connector thickness and materials such as steel, aluminum, and stainless steel. The results showed that Grid and Truss type widely distributed along the section of sandwich wall panel had a great influence on the thermal bridge coefficient by changing the influence factors. Based on the results of thermal and structural performance analysis, effective heat transmission coefficient of the sandwich wall panel satisfying the passive house insulation criteria was calculated. As a result, it was found that heat transmission coefficient was increased from $0.132W/m^2{\cdot}K$ to $0.141{\sim}0.306W/m^2{\cdot}K$ depending on the shear connector types and materials. In the majority of cases, the passive house insulation criteria was not satisfied after using shear connectors. The results of this study were likely to vary according to how influence factors were set, but it is important to apply the methods that reduce the thermal bridge when there would be a possibility of greatly affecting the insulation performance.
In order to improve the housing culture, construction changes for the utilization of diverse and multifunctional spaces are appearing in response to the increasing diverse needs of consumers. Cellular Light-weight Concrete (CLC) is being developed for use in fire-resistant heat-insulating walls and non-bearing walls. However, manufacturing non-uniformity has become a problem as a drawback due to the use of foamed bubbles and normal temperature curing, and additional research is required. Therefore, in order to suppress cracks due to drying shrinkage, silica sand is mixed with CLC to try to understand its characteristics. In the experiment, the compressive strength from 7 to 28 days of age was measured via a constant temperature and humidity chamber, and the drying shrinkage was analyzed according to each condition using a strain gauge. The compressive strength of matrix tends to decrease as the substitution rate of silica sand increases. This is judged by the result derived from the fact that the specific surface area of silica sand is smaller than that of slag. Based on KS F 2701 (ALC block), the compressive strength of 0.6 products is 4.9 MPa or more as a guide, so the maximum replacement rate of silica sand that satisfies this can be seen at 60%. Looking at the change in drying shrinkage for just 7 days, the shrinkage due to temperature change and drying is 0.7 mm, and the possibility of cracking due to shrinkage can be seen, and it seems that continuous improvement and supplementation are needed in the future.
본 연구에서는 보편적으로 건물의 옥상 등에 사용되는 폴리 우레탄 방수재의 바탕구조물의 함수정도와 시공환경조건에 따른 하자원인을 분석하기 위한 것으로 바탕판의 함수조건에 따른 부착강도, 표면상태를 육안관찰하였고, 온도, 습도의 양생조건에 따라서 방수재 도막의 기계적 성능을 평가하였다. 실험결과 바탕판의 함수상태가 10%이상일 때 도막의 부착이 이뤄지지 않음을 확인하였고, 온습도 조건이 20℃, 80% RH일때는 기초물성이 모두 확보되었으나, 40℃, 60% RH일 때 표면에 기포가 관찰되었으며, 40℃, 80% RH일 때 건조도막 기초물성이 KS F 3211 성능기준이하로, 우레탄 방수재 도포에 있어 시공환경조건의 하자원인 중 바탕판의 함수조건 및 양생 시 절대습도가 중요한 요인임을 확인하였다.
본 연구는 세골재는 사용하지 않고 인공경량조골재로써 팽창점토와 경석을 사용하여 제작된 인공경량골재 콘크리트의 응력-변형율특성을 구명하기 위하여 실시되었으며, 시험을 통하여 얻어진 결과를 요약하면 다음과 같다. 1. 동탄성계수는 인공경량조골재인 팽창점토와 경석을 사용한 경우 $1.9{\times}10^5kg/cm^2$과 $2.0{\times}10^5kg/cm^2$으로 나타났으며, 경석을 사용한 경우가 5%정도 크게 나타났다. 2. 정탄성계수는 팽창점토 및 경석을 사용한 경우 $1.8{\times}10^5kg/cm^2$과 $1.6{\times}10^5kg/cm^2$으로 나타났으며, 정탄성계수는 동탄성계수보다 10~30%정도 작게 나타났다. 3. 사용골재에 따른 하중-이력곡선은 하중이 증가하여 최대하중에서 파괴가 이루어진 후 급격히 감소하는 경향을 보였으며, 특히 기포제를 첨가한 경우는 최대하중에서 파괴된 이후에도 상당시간 내하능력을 유지하는 것으로 나타났다. 4. 응력-변형율곡선은 사용골재의 종류에 관계없이 응력의 증가와 함께 증가하여 최대하중에서 파괴가 된 후 급격히 감소하는 경향을 보였으며, 취성이 크다는 것을 알 수 있었다. 5. 최대응력하에서의 변형율은 팽창점토를 사용한 경우 $1.7{\times}10^{-3}$, 경석을 사용한 경우는 $2.83{\times}10^{-3}$로써, 팽창점토보다 경석을 사용한 경우의 변형율이 66%정도 크게 나타났다.
방사성 폐기물 최종 매립장이 완공됨으로써 그동안 원자력 발전소 내에서 관리하고 있던 중 저준위 방사성 폐기물은 최종 처분장으로 이송하여 관리해야 한다. 주로 액상의 이온교환수지로 구성된 중 저준위 방사성 폐기물은 플라스틱 또는 강제용기 안에서 시멘트계 재료로 고화처리 되고 있다. 시멘트계 재료는 취성적이므로 이송 중 낙하, 충돌 등에 의해 붕괴될 경우, 방사성 물질이 유출될 수 있는 가능성이 있다. 안전성이 있는 이송장비를 설계하기 위해서는 현재의 고화체가 어느 정도의 강도를 발현하고 있는지를 확인할 필요가 있다. 그러나 방사성 물질을 포함하고 있는 폐기물의 강도를 직접법에 의해 측정하는 것은 위험하므로 불가능하기 때문에 동탄성계수와 같은 비파괴시험을 통해 간접적으로 강도를 파악하여야 한다. 따라서 방사성 폐기물의 압축강도와 동탄성계수의 관계를 규명할 필요가 있다. 폐기할 시점에서 이온교환수지 처리용 고화체의 압축강도는 3.44 MPa (500 psi)이다. 이론적으로 시멘트는 시간의 경과에 따라서 강도가 증진되기 때문에 폐기된 후 수년에서 수십년이 경과한 현 시점에서 고화체의 강도는 기준치를 크게 상회할 가능성이 있다. 이와 같은 배경에서 이 연구에서는 중 저준위 방사성 폐기물 처리용시멘트 고화체의 재료구성을 유지하면서 3~30 MPa 범위의 다양한 강도 수준을 갖는 시멘트 고화체를 제조하고 이를 대상으로 압축강도와 동탄성계수의 관계를 도출하고자 하였다. 실험 결과, AE제 첨가율의 변화에 의해 목표로 설정하였던 3~30 MPa 범위를 만족하는 고화체의 제조가 가능하였다. 또한 미리 기포를 제조하여 혼입하는 방법보다 AE제를 배합수에 직접 혼합하는 방법이 단위용적질량 및 강도를 보다 정확히 조절하는데 유리한 것으로 나타났다. AE제 첨가율에 의한 단위용적질량과 공기량은 첨가율이 낮은 범위에서 급격하게 변화하였으며 첨가율이 증가할수록 변화량은 감소하였다. 이온교환수치 처리용 시멘트 고화체의 동탄성계수는 4.1~10.2 GPa 범위로 나타났으며, 일반콘크리트 보다 약 20 GPa 정도 낮고 그 차이는 강도의 증가에 따라 증가하는 것으로 나타났다. 이온교환수지 처리용 시멘트 경화체에서도 압축강도와 동탄성계수는 선형적인 관계를 보이고 있다.
시설채소산물을 습도조절이 가능한 원적외선 방사체 저장고(5$^{\circ}C$ 또는 1$0^{\circ}C$의 온도와 90%의 상대습도)에 저장한 결과 채소류의 선도유지기간이 연장되는 것을 확인하였고, 중량손실율은 원적외선 방사체 저장고에 저장한 채소류가 중량손실율이 대조구에 비하여 낮게 나타났다. 따라서 습도조절이 가능한 원적외선 방사체 저장고에 채소류를 저장함으로서 채소류의 수분손실을 방지할 수 있음을 확인할 수 있었으며, 일정기간동안 원적외선 방사체 저장고에 저장함으로써 ascorbic acid함량의 감소를 대조구에 비하여 낮은 비율로 억제할 수 있었다. 총균수의 경우 채소류 시험구에서 원적외선 방사체 저장고에서 저장할수록 오염미생물의 총균수가 낮게 나타났다. 표면색도의 경우, a값은 모든 시험구에서 감소하였으며 원적외선 방사체 시험구에 비하여 대조구 저장시료의 표면색도가 청색도를 증가시키는 변화를 관찰할 수있었고, b값은 시료간에 유의성 있는 차이없이 다소 증가하는 것으로 나타났다. 부패율은 수분 함유율이 높은 채소류 일수록 원적외선 방사체 저장시설을 이용하는 경우, 부패율을 낮게 유지할 수 있었다. pH의 변화는 채소류를 저장하는 기간이 증가할수록 pH는 더 낮아졌고, 대조구에 비해 원적외선 방사체 저장고의 시험구의 pH는 변화율은 적었다. 따라서, 원적외선 방사에 저장시설내에 오이, 호박 및 방울토마토와 같은 채소류를 저온고습도상에서 저장할 경우, 채소류의 품질변화를 최소화 할 수 있어 갓 수확한 채소류의 선도유지기간을 연장할 수 있는 저장법이 될 수 있음을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.