• Proceedings of the KSEEG Conference
• /
• 1999.04a
• /
• pp.80-85
• /
• 1999

본 연구에서는 토목분야에서 중요한 문제가 되는 기초 파일의 깊이 탐지와 관련하여 시추공 자력탐사의 적용성을 확인하기 위하여 시추공 자력탐사 모형 반응 계산 및 역산 알고리즘을 개발하였다. 모형 반응 계산은 시추공 자력탐사에 적합하고 삼성분 이상을 계산할 수 있도록 기존의 방법을 수정하였으며, 역산 알고리즘은 일반적인 자력탐사 자료 역산의 불안정성을 고려하여 광역적 최적화 기법의 하나임 ASA(Adaptive Simulated Annealing : Ingber, 1993)를 이용하였다. 개발된 모형 반응 및 역산 알고리즘을 간단한 모형 및 합성자료에 대해 적용한 결과 그 타당성을 검증할 수 있었다. 또한 실제 현장에서 부딪힐 수 있는 무작위 잡음을 첨가한 자료, 주변 파일의 영향 및 지표 구조물에 의한 영향을 고려한 복잡한 모형에 대해 기초 파일의 깊이를 탐지해 낼 수 있었으며, 이를 토대로 실제 현장 적용시 고려해야할 현장지침에 대해서도 고찰할 수 있었다. 마지막으로 실제 현장자료에 적용한 결과 실제 파일의 깊이를 역산해 낼 수 있음을 확인함으로써, 기초 파일의 깊이 탐지를 위한 시추공 자력탐사의 적용성 및 본 알고리즘의 현장 적용성을 확인할 수 있었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.4
• /
• pp.222-231
• /
• 2016

Multi-member lattice-type structures including jackets and tripods are being considered as good alternatives to monopile foundations for relatively deep water of 25-50 m of water depth owing to their technical and economic feasibility. In this study, the reliability analysis of bottom-fixed offshore wind turbines with monopile and/or multi-member lattice-type foundations is carried out and the sensitivities of random variables such as material properties, external wind loadings and scouring depth are compared with respect to different types of foundations. Numerical analysis of the NREL 5 MW wind turbine supported by monopile, tripod and jacket substructures shows that the uncertainties of soil properties affect the reliability index more significantly for the monopile-supported OWTs while the reliability index is not so sensitive to the material properties in the cases of tripod- and jacket-supported OWTs. In conclusion, the reliability analysis can be preliminarily carried out without considering soil-pile-interaction in the cases of tripod- and jacket-supported OWTs while it is very important to use the well-measured soil properties for reliable design of monopile-supported OWTs.

• Plant Journal
• /
• v.12 no.1
• /
• pp.37-43
• /
• 2016

The corrosivity evaluations on soil surrounding the buried steel piles under manufacturing plants. It was proven that the soil structure of this sample area is composed of several soil layers, and that each layer show the different corrosivity. The predicted average corrosion rates of some layers are about 0.33mm/y, which is over than the general corrosion rate, 0.01-0.02mm/y.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.11
• /
• pp.119-127
• /
• 2013

Recently, several researches on the development of new economical foundation types have been performed to support floating structures as many offshore structures have been constructed. This study focused on the evaluation of bearing capacity of group suction piles, which are connected by a concrete pile cap. The offshore floating structures are mainly subjected to horizontal loading, so the horizontal bearing capacities of the group suction piles were analyzed by performing 3-dimensional finite element analyses. The group suction piles are expected to behave as a rigid pile due to its shallow embedded depth. Therefore, the detailed soil modeling was necessary to simulate the bearing behavior of soils under low confining pressure. The modulus and the strength of soils were modelled to increase with effective confining pressure in soils. For the parametric study, the center-to-center spacing between piles was varied and two soil types of clay and sands were applied. The analyses results showed that the yielding load of the group pile increased with the increase of the pile spacing and the yielding load of the group piles with 5D spacing was about 3 times larger than that of the single pile with free rotation.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.10
• /
• pp.33-44
• /
• 2014

The preliminary design of suction pile as the supporting system for concrete floating structures was performed for the pilot project of the southwest coast area in Korea. Prior to starting design work, site conditions of the area including ground and hydraulic conditions, and a 100-year return period external force were throughly evaluated. The suction pile for mooring of the offshore floating structures has to satisfy the lateral resistance against external force as well as the penetration ability according to the soil conditions such as soil types, shear strengths, effective stresses, and seepage forces. In the design, the required penetration depths, which were stable for lateral resistance, were evaluated with the diameters of cylindrical suction pile as the final installing ones. And the design suction pressures at each penetrating depths, at which sand boiling did not occur, were assessed through the comparison of penetration and penetrationresistance forces. As a result, it was impossible for suction piles with the diameter range of 3.0~5.0 m to penetrate into required penetration depths. On the other hand, suction piles with the diameter range of 6.0 m and 7.0 m satisfied both the horizontal stability and the penetration ability by design suction pressures at the required penetration depths of 8.5 m and 8.0 m, respectively.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.466-469
• /
• 2018

최근 PC를 비롯한 모바일, IOT 기기 등 다양한 환경에서의 사이버 공격이 기승을 부리고 있으며, 그 방법 또한 나날이 발전하고 있다. 이러한 사이버위협으로부터 개인 및 기업의 자산을 지키기 위한 근본적인 대안이 없이는 매번 반복적인 피해를 피하기 어려운 현실이다. 다양한 환경이라고 함은, 다양한 OS(Operation System), 다양한 ISA (Instruction Set Architecture)의 조합으로 이루어지는 사이버환경을 의미한다. 이러한 조합들은 일반 사용자들에게 가장 많이 쓰이는 Windows & Intel 조합의 환경과, Linux & Intel 또는 Linux & ARM 등 기업에서 서비스를 위해 쓰이는 서버 환경 등을 예로 들 수 있다. 그밖에 최근 IOT기기나 모바일 기기와 같은 환경도 있을 수 있다. 바이너리 파일에 대한 보안은 다양한 연구가 진행되고 있지만 그 범위가 방대하고, 깊이가 필요한 영역이라 진입 장벽이 높은 실정이다. 본 논문에서는 이러한 바이너리의 취약점을 분석하기 위한 첫 번째 단계로써 다양한 바이너리 파일을 하나의 정형화된 자료구조로 변환하는 바이너리 포맷 분석기의 한 방법을 제시하고자 한다. 다양한 OS와 다양한 ISA환경에서 사용되는 바이너리들에서 공통적으로 존재하는 정보들 중, 바이너리의 취약점 분석을 위해 필요한 데이터를 보다 효율적으로 수집하고, 관리하는 것이 바이너리를 통한 사이버 위협을 탐지하는 연구에서 기초가 된다고 할 수 있기 때문이다.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.6
• /
• pp.29-38
• /
• 2010

Micro-piles have been used to increase the bearing capacity or to restrain settlement of existing shallow foundation. Recently, micro-piles are used to support the shallow foundation, to stabilize the slope and to resist the sliding of retaining wall. Using the micro-piles in geotechnical engineering, some investigators have studied the effective installing method by model test or field test. But most of previous studies are chiefly focused on the micro-piles in sand or clay layer. If a rock layer exists in soil, the installing length of micro-piles may be determined by the depth of rock layer. In this case, the stiffness of pile may be changed by the installing length of pile, and so the installing method has to be altered by the changed stiffness of pile. Model tests have been conducted to study the installation method of micro-pile in soil with rock layer. As a result, when the ratio of length of pile is below 50 ($L/d{\leq}50$), installing of micro-piles in vertical position is effective regardless of the depth of rock layer. If the depth of rock layer is deeper than soil failure zone and the ratio of the length of pile exceeds 50 (L/d>50), installing of the micro-piles in sloped position is effective.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.361-375
• /
• 2015

An energy pile is one of the novel ground heat exchangers (GHEX's) that is a economical alternative to the conventional closed-loop vertical GHEX. The combined system of both a structural foundation and a GHEX contains a heat exchange pipe inside the pile foundation and allows a working fluid circulating through the pipe, inducing heat exchange with the ground formation. In this paper, a group of energy piles equipped with parallel U-type (5, 8 and 10 pairs) heat exchange pipes was constructed in a test-bed by fabricating in large-diameter cast-in-place concrete piles. In addition, a closed-loop vertical GHEX with 30m depth was constructed nearby to conduct in-situ thermal response tests (TRTs) and to compare with the thermal performance of the cast-in-place energy piles. A series of thermal performance tests was carried out with application of an artificial cooling and heating load to evaluate the heat exchange rate of energy piles. The applicability of cast-in-place energy piles was evaluated by comparing the relative heat exchange efficiency and heat exchange rate with preceding studies. Finally, it is concluded that the cast-in-place energy piles constructed in the test-bed demonstrate effective and stable thermal performance compared with the other types of GHEX.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.31-39
• /
• 2014

The helical pile is a manufactured steel pile consisting of one or more helix-shaped bearing plates affixed to a central shaft. This pile is installed by rotating the shaft into the ground to support structural loads. The advantages of helical piles are no need for boring or grout process, and ability to install with relatively light devices. The bearing capacity of the helical pile is exerted by integrating the bearing capacity of each helix plate attached to the steel shaft. In this paper, to estimate the bearing capacity of moderate-size helical piles, 6 types of helical piles were constructed with different shaft diameter, plate configuration and the penetration depth. A series of field loading tests was performed to evaluate the effect of helical pile configuration on the bearing capacity of helical pile, constructed in two different shaft diameters (i.e. 73 mm and 114 mm). In the same way, the diameter of bearing plate was also changed from 400mm to 250mm with one or three plates. As well, the penetration depth was varied from 3m to 6m to analyze the relation between the penetration depth and the bearing capacity. As a result, not only the increase of the shaft diameter, but also the number or diameter of helix bearing plates enhances the bearing capacity. Especially the configuration of the helix plate is more critical than the shaft diameter.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.9
• /
• pp.37-45
• /
• 2014

An embedded length of monopile caused by a scouring should be evaluated to monitor the stability of offshore foundations, because offshore foundations are affected by horizontal load. The objective of this study is to evaluate the scouring around offshore foundation by using electrical resistivity and to estimate ground stiffness by using shear wave tomography. The electrical resistivity profiles and shear wave tomography were measured according to the scour depth of model ground prepared with sand and cement. Several electrodes and bender elements were used to measure the electrical resistivity and shear waves, respectively. The electrode sets are attached on the monopile surface and bender elements are arranged in $7{\times}7$ arrays by using nylone frames. The electrical resistivity profiles and shear wave tomography are acquired by laboratory experiment. Maximum scour depth was estimated by electrical resistivity profiles and the ground stiffness of model ground was estimated by shear wave tomography. This study suggests that the electrical resistivity profiles and shear wave tomography may be useful for monitoring the stability of the offshore foundations.