• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.542-550
• /
• 1998

A direct contact heat exchanger using particle-suspended gas as a heat transfer medium is analyzed with an extended emphasis on the radiation, i. e., considering the radiation by both gas and particles. While the Runge-Kutta method is used for a numerical analysis of the momentum and energy equations, the finite volume method is utilized to solve the radiative transfer equation. Present study shows a notable effect by the gas radiation in addition to the particle radiation, especially when changing the chamber length as well as the gas and particle mass flow rate. When the gas and particle mass flow rate is raised, the gas temperature in the particle heater still increases as the gas absorption coefficient increases, which is different from the results for the small scale heat exchanger.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.439-440
• /
• 2001

대기 중의 에어러솔 입자들은 직접적으로는 빛의 산란, 흡수 등 복사 평형에 영향을 미치며, 간접적으로는 구름 응결핵(CCN)으로 작용함으로써 알베도와 구름의 수명에 영향을 미치게 된다. 자연적인 에어러솔은 인위적 활동에 따른 황 화합물, 질소 화합물, 유기물. 매연 그리고 토양 먼지의 증가에 의해 사실상 교란되어 왔다. 인위적인 에어러솔에 의한 복사 강제력(radiative forcing)은 현재 전 지구적 평균이 -0.3~-3.5Wm$^{-2}$ 정도로 추정되며, 이것은 온실 기체에 의한 강제력인 +2.0~+2.8Wm$^{-2}$ 와 비교될 만 하다(IPCC, 1995). (중략)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.5
• /
• pp.351-358
• /
• 2008

Extinction characteristics of hydrogen-air diffusion flames at various pressures are investigated numerically by adopting counterflow flame configuration as a model flamelet. Especially, effect of radiative heat loss on flame extinction is emphasized. Only gas-phase radiation is considered here and it is assumed that $H_2O$ is the only radiating species. Radiation term depends on flame thickness, temperature, $H_2O$ concentration, and pressure. From the calculated flame structures at various pressures, flame thickness decreases with pressure, but its gradient decreases at high pressure. Flame temperature and mole fraction of $H_2O$ increase slightly with pressure. Accordingly, as pressure increases, radiative heat loss becomes dominant. When radiative heat loss is considered, radiation-induced extinction is observed at low strain rate in addition to transport-induced extinction. As pressure increases, flammable region, where flame is sustained, shifts to the high-temperature region and then, shrunk to the point on the coordinate plane of flame temperature and strain rate. The present numerical results show that radiative heat loss can reduce the operating range of a combustor significantly.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.30.1-30.1
• /
• 2021

수소 라이먼 알파선은 관측이 어려운 외부은하의 성간 물질이나 성운 주위의 물질의 운동학적, 기하학적 상태를 알려주는 지표이다. 특히 라이먼 알파 방출 스펙트럼의 두 최고점에서 측정한 선속도 차이(Vsep)는 물질의 수축, 팽창 여부에 영향을 받기 때문에 은하의 역학적 특성을 연구하는 데에 있어 새로운 도구로서 각광받고 있다. 이 연구에서는 복사유체역학 시뮬레이션 코드 RAMSES-RT를 이용하여, 다양한 물리량을 가진 은하가 만드는 라이먼 알파선 특성을 분석하였다. 은하 내 기체 함량 및 중원소 함량비를 다르게 하였으며, 각 시뮬레이션들은 몬테-카를로 공진선 복사전달 코드 RASCAS를 이용하여 라이먼 알파선의 복사 과정을 계산하였다. 그 결과, 거대분자운 시뮬레이션 대비(Kimm et al. 2019) Vsep이 크게 증가하였으며 (약 150->300km/s), 관측되는 은하들 수준의 Vsep이 재현되는 것을 확인하였다. 은하의 중원소 함량비가 증가한 경우, 은하 내 먼지량과 젊은 별들이 거대분자운에 머무는 시간이 늘어나기 때문에 기준 은하와 비교하여 선속도 차이가 작아졌으며(Vsep~270km/s), 은하의 기체 함량을 증가시켰을 때는 산란 횟수 증가로 인하여 선속도 차이가 증가함(약 345km/s)을 확인할 수 있었다. 합병하는 은하의 경우, 성간물질의 역학적 상태를 극적으로 만든다고 알려져 있음에도 불구하고, 고립된 은하와 비슷한 정도의 산란 특성을 보였다. 마지막으로 시뮬레이션 상에서 강하게 발달하지 않는 중성상태의 은하주변물질의 존재가 선속도차이 예측에 미치는 영향에 대해서 토론하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.551-560
• /
• 1988

Gas-particle two phase flow and heat transfer in a cavity receiving thermal radiation through selectively transparent walls have been analyzed by a finite difference method. Particles injected from the upper hole of the cavity are accelerated downward by gravity and exit through the lower hole while they absorb, emit and scatter the incident thermal radiation. Gas phase is heated through convection heat transfer from particles, and consequently buoyancy induced flow field is formed. Two-equation model with two-way coupling is adopted and interaction terms are treated as sources by PSI-Cell method. For the particulate phase, Lagrangian method is employed to describe velocities and temperatures of particles. As thermal radiation is incident upon horizontally, radiative heat transfer in the vertical direction is assumed negligible and two-flux model is used for the solution of radiative heat flus. Gas phase velocity and temperature distributions, and particle trajectories, velocities and temperatures are presented. The effects of particle inlet condition, particle size, injection velocity and particle mass rate are mainly investigated.

• Korean Journal of Remote Sensing
• /
• v.24 no.6
• /
• pp.559-569
• /
• 2008

The Geostationary Ocean Color Imager (GOCI) on board the Communication Ocean Meteorological Satellite (COMS), the first geostationary ocean color sensor, requires accurate atmospheric correction since its eight bands are also affected by atmospheric constituents such as gases, molecules and atmospheric aerosols. Unlike gases and molecules in the atmosphere, aerosols can interact with sunlight by complex scattering and absorption properties. For the purpose of qualified ocean remote sensing, understanding of aerosol-radiation interactions is needed. In this study, we show micro-physical and optical properties of aerosols using the Optical Property of Aerosol and Cloud (OPAC) aerosol models. Aerosol optical properties, then, were used to analysis the relationship between theoretical satellite measured radiation from radiative transfer calculations and aerosol optical thickness (AOT) under various environments (aerosol type and loadings). It is found that the choice of aerosol type makes little different in AOT retrieval for AOT<0.2. Otherwise AOT differences between true and retrieved increase as AOT increases. Furthermore, the differences between the AOT and angstrom exponent from standard algorithms and this study, and the comparison with ground based sunphotometer observations are investigated. Over the northeast Asian region, these comparisons suggest that spatially averaged mean AOT retrieved from this study is much better than from standard ocean color algorithm. Finally, these results will be useful for aerosol retrieval or atmospheric correction of COMS/GOCI data processing.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.11
• /
• pp.3630-3638
• /
• 1996

An experimental study has been conducted to explore the behaviors of the radiative ignition of polymethylmetacrylate(PMMA) in a confined enclosure such as the ignition delay time, PMMA surface temperature, the ignition location and the ignition process. In addition, the effects of hot wall orientation on the ignition delay and PMMA surface temperature were studied. When the hot wall is located at the bottom, ignition delay time is the shortest. Ignition surface temperature becomes the lowest for the hot top wall case. These are due to buoyancy effect. Since the radiative heat flux of hot wall is rather lower than laser source, the ignition is considered to be controlled by the mixing process. Therefore, the ignition location, where appropriate mixture of fuel and oxygen exists, occurs near the hot wall. The flame propagates along the hot wall where there exists sufficient oxygen.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1955-1962
• /
• 1992

The purpose of this study is to identify the radiative heat transfer augmentation by a coaxial cylinder introduced in the infinite cylindrical pipe enclosing a participating gas. The gas is either a mixture of water vapor and carbon dioxide or gray. The gas is assumed to be homogeneous at a constant temperature, and has a refractive index of unity. All of the surfaces are opaque and gray, diffusely emitting and reflecting at a constant temperature, The effect of system diameter, diameter ratio, wall emittances, gas and surface temperatures, mixture component on heat transfer augmentation are studied by using the zone method with participating gas radiative properties evaluated from the weighted sum of gray gases model. From the radiative equilibrium condition, the installed wall temperature is formulated and calculated by the iteration method. If the medium is a gray gas, the augmentation observed are negligible. For the range of values studied for a real gas, if the system diameter is larger than about 0.1m the augmentation parameter increases up to about 1.2 as the system diameter increases. The augmentation parameter have a maximum value at a certain diameter ratio. The augmentation parameters decreases as the emittance of the installed wall decreases. If the gas temperature is higher than about 1273 k, the augmentation parameter decreases as the gas temperature increases.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.214-224
• /
• 1990

A "two-fluid" model using thermal eddy diffusivity concept and Lumley's drag reduction theory, is proposed to analyze heat transfer of the turbulent dilute gas-particle flow in a vertical pipe with constant wall heat flux. The thermal eddy diffusivity is derived to be a function of the ratio of the heat capacity-density products .rho. over bar $C_{p}$ of the gaseous phase and the particulate phase and also of the ratio of thermal relaxation time scale to that of turbulence. The Lumley's theory dictates the variation of the viscous sublayer thickness depending on the particle loading ratio Z and the relative particle size $d_{p}$/D. At low loading ratio, the size of viscous sublayer thickness is important for suspension heat transfer, while at higher loading, the effect of the ratio .rho. $_{p}$ over bar $C_{p}$$_{p}$/ .rho. $_{f}$ over bar $C_{p}$$_{f}$ is dominant. The major cause of decrease in the suspension Nusselt number at lower loading ratio is found to be due to the increase of the viscous sublayer thickness caused by the suppression of turbulence near the wall by the presence of solid particles. Predicted Nusselt numbers using the present model are in satisfactory agreements with available experimental data both in pipe entrance and the fully developed regions.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.324-325
• /
• 2002

대기중의 에어로졸은 시정악화나 호흡기 질환의 원인이 되는 오염물질중의 하나이다. 또한, 지구의 복사수지와 관련하여 기후변화에도 영향을 미치는 물질이다. 이러한 대기중의 에어로졸에 관한 연구에 라이다를 이용한 관측기술이 활용되면서부터 기존의 한계를 극복하고, 에어로졸의 연직분포에 관한 연구가 가능하게 되었다. 라이다는 일정한 파장의 레이저를 투과하여 대기중의 에어로졸이나 기체에 dlk여 산란되어 반사되어 오는 빛을 측정하는 기기로, 이 측정자료를 분석함으로써 대기중의 물질의 분포를 알수 있다. (중략)