• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.455-455
• /
• 2011

개발로 인한 환경변화는 관련 분석모형을 통해 직접적으로 예측하기 하는 것이 가장 바람직하지만 데이터 취득의 어려움, 분석 방법론의 부재 등의 이유로 정량적 평가가 어려운 현실이다. 그렇기 때문에 수자원사업을 계획시 대부분 환경적인 영향을 매우 정성적인 형태로 평가하거나 수질과 같은 대표적인 항목에 대해서만 예측하는 수준이다. 기존의 연구 또한, 유역 또는 행정구역의 현재의 현 상황을 평가하기 위한 것이 주이며, 수자원사업과 관련성이 적은 항목도 일부 포함되어 있기 때문에 수자원사업의 특수성을 반영하기에 한계가 있다. 현 상황의 이러한 문제점을 인식하여 본 연구는 오늘날 대표적 의사결정 기법이라 할 수 있는 계층화분석과정(AHP)과 다속성효용이론(MAUT)을 활용하여 향후 수자원사업과 관련된 다기준의 사결정 과정에서의 환경성 평가방안을 제시하였다. 환경성 평가기준은 수질, 경관, 생태계 이렇게 세 가지 항목으로 구성하였고, 각 평가기준에 대한 수준을 직접적으로 대변 가능한 정량화 방안을 제시하였다. 그리고 앞서 정량화된 값을 표준화하기 위하여 MAUT 기법으로부터 평가기준별 효용함수를 도출하였다. 한편, 사업을 시행함에 따라 예상되는 환경성변화는 사업전 환경성과 사업 후 환경성을 비교하도록 하였고, 이때 해당사업의 특수성을 반영하고자 별도의 설문과정을 통해 평가기준별 가중치를 결정하였다. 본 연구는 환경성 검토시 생태학적, 물리적 분석에 기반을 둔 정량적 예측의 어려움을 보완하기 위해 정성적 예측을 추가적으로 제시하였고, 사업의 특수성과 평가항목이 갖는 일반성을 명확히 구분하여 의사결정 과정에서 주관적인 요소를 최소화하였다. 또한, 평가항목별 사업전후의 환경성을 비교, 검토함으로써 실제 사업추진 과정에서 개발로 인한 부정적 영향의 사전예방에 도움을 줄 수 있을 것으로 판단된다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.5
• /
• pp.951-958
• /
• 2021

With the growing cyber threat to information assets, it has become important to share threat information quickly. This paper examines the sharing of cyber threat information and presents a method to determine the importance of threat indicators in the information sharing market by calculating weights. The analysis was conducted using AHP techniques, with a pairwise comparison of the four factors(attacker & infected system indicators, role indicators, malicious file indicators, technique & spread indicators) and the details of each factor. Analysis shows that malicious file indicators are the most important among the higher evaluation factors and infected system IP, C&C and Smishing are the most important factors in comparison between detailed items. These findings could be used to measure the preference of consumers and the contribution of information provider for facilitating information sharing.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.182-191
• /
• 2007

Objective: The purpose of this study was to evaluate the validity of midsagittal reference (MSR) planes constructed in maxillofacial 3D images. Methods: Maxillofacial computed tomography (CT) images were obtained in 36 normal occlusion individuals who did not have apparent facial asymmetry, and 3D images were reconstructed using a computer software. Six MSR planes (Cg-ANS-Ba, Cg-ANS-Op, Cg-PNS-Ba, Cg-PNS-OP, FH${\perp}$(Cg, Ba), FH${\perp}$(Cg, Op)) were constructed using the landmarks located in the midsagittal area of the maxillofacial structure, such as Cg, ANS, PNS, Ba and Op, and FH plane constructed with Po and Or. The six pairs of landmarks (Z, Fr, Fs, Zy, Mx, Ms), which represent right and left symmetry in the maxillofacial structure, were selected. Statistically significant differences of the right and the left measurements were examined through t-test, and the difference of the right and the left measurement was compared among the six MSR planes. Results: The distances from the right and the left landmarks in each pair to each MSR plane did not show a statistically significant difference. The reproducibility of the landmark identification was excellent. Conclusion: All the six planes constructed in this study can be used as a MSR plane in maxillofacial 3D analysis, particularly, the planes including Cg and ANS.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.125-133
• /
• 2010

Although work-efficiency of construction machinery is a critical factor for estimating its workable-quantity perunit time, the efficiency figure table presented in the Poom-Sam that is used for Construction Cost Estimation of public sectors in Korea is very subjective for practical usage. In order to suggest objective work-efficiency table for a Pump-Dredger, domestic and overseas documentary records were investigated and on-going construction sites were also visited. Moreover, actual work quantities collected from the site visits were compared with the ones calculated based on the Standard Measurement Methods used in Japan. The research found that the table can be revised by means of detailing down by several factors, namely project type, depth of soil, undersea-site shape, and condition on the sea for better estimation of its workable-quantity. The research will be the foundation for applying the rapid development of Construction Equipment and technology to the appropriate cost estimations and the ground work of related studies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.187-192
• /
• 2015

In general, design of urban intersections are fundamentally different from rural intersections, but current urban intersection design has been appled to rural standards. This study has suggested the design standard for urban intersection grades based on the existing literature, field investigating and comparative analysis. Moreover, this study analyzes and compares the differences between urban and rural intersections, and intersections have been derived by appropriate design standards after reviewing the domestic and international grades design criteria. Site survey was performed to validate the derived design criteria by analyzing statistically to establish the design standards. Results were produced for the intersection portion grade standards by comparing the number of instructions which produced appropriate slope degree from 2.5% to 3% in normal condition and slope can be extended to 5% in some critical cases. In-situ investigation was performed to validate the produced data where slope was found from 0.0~8.6%. Additional data of accident analysis were also collected for the validation of the suggested data and correlation analysis was performed using the SPSS tool. Data were analyzed statistically using 95% significance level for vehicle-to-vehicle collided, head-on collision accident rates, where accident rates significantly correlated with the grade. Therefore, appropriate grade at the intersection should be designed and applied in order to reduce the number of accidents at the intersection. Finally, appropriate grades for urban intersections are suggested from 1-3% for normal cases and grades could extend up to 5% for unavoidable cases where extra care must be taken when designing.

• Geophysics and Geophysical Exploration
• /
• v.13 no.3
• /
• pp.227-234
• /
• 2010

The vertical response spectra using the observed ground motions from the recent more than 30 macro earthquakes were analysed and then were compared both to the seismic design response spectra (Reg Guide 1.60), applied to the domestic nuclear power plants, and to the Korean Standard Design Response Spectrum for general structures and buildings (1997). 176 vertical ground motions, without considering soil types, were used for normalization with respect to the peak acceleration value of each ground motion. The results showed that response spectrum had strong dependency on epicentral distance. The results also showed that the vertical response spectra revealed much higher values for frequency bands above 5~7 Hz than Reg. Guide (1.60). The results were also compared to the Korean Standard Response Spectrum for the 3 different soil types and showed that the vertical response spectra revealed much higher values for the frequency bands below 0.2 second (5 Hz) than the Korean Standard Response Spectrum (SD soil condition). These frequency-dependent spectral values could be related to the characteristics of the domestic crustal attenuation and the effect of each site amplification. However, through the qualitative improvements and quantitative enhancement of the observed ground motions, the conservation of vertical seismic design response spectrum should be considered more significantly for the frequency bands above 5 Hz.

• Tunnel and Underground Space
• /
• v.20 no.6
• /
• pp.399-407
• /
• 2010

The horizontal response spectra using the observed ground motions from the recent more than 19 macro earthquakes were analysed and then were compared to both the seismic design response spectra (Reg Guide 1.60), applied to the domestic nuclear power plants, and the Korean Standard Design Response Spectrum for general structures and buildings (1997). 130 horizontal ground motions, without considering soil types, were used for normalization with respect to the peak acceleration value of each ground motion. The results showed that response spectrum have strong dependency on epicentral distance. The results also showed that the horizontal response spectra revealed much higher values for frequency bands above 5 Hz than Reg. Guide (1.60). The results were also compared to the Korean Standard Response Spectrum for the 3 different soil types and showed that the vertical response spectra revealed much higher values for the frequency bands below 0.3 second than the Korean Standard Response Spectrum (SD soil condition). These spectral values dependent on frequency could be related to characteristics of the domestic crustal attenuation and the effect of each site amplification. However, through the qualitative improvements and quantitative enhancement of the observed ground motions, the conservation of horizontal seismic design response spectrum should be considered more significantly for the frequency bands above 5 Hz.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.457-467
• /
• 2018

Currently, the regulation and rules for public surveying and the UCPs (Unified Control Points) adapts those of the triangulated traverse surveying. In addition, such regulations do not take account of the unique characteristics of GNSS (Global Navigation Satellite System) surveying, thus there are difficulties in field work and data processing afterwards. A detailed procesure of GNSS processing has not yet been described either, and the verification of accuracy does not follow the generic standards. In order to propose an appropriate procedure for field surveys, we processed a short session (30 minutes) based on the scenarios similar to actual situations. The reference network in Seoul was used to process the same data span for 3 days. The temporal variation during the day was evaluated as well. We analyzed the accuracy of the estimated coordinates depending on the parameterization of tropospheric delay, which was compared with the 24-hr static processing results. Estimating the tropospheric delay is advantageous for the accuracy and stability of the coordinates, resulting in about 5 mm and 10 mm of RMSE (Root Mean Squared Error) for horizontal and vertical components, respectively. Based on the test results, we propose a procedure to estimate the daily solution and then combine them to estimate the final solution by applying the minimum constraints (no-net-translation condition). It is necessary to develop a web-based processing system using a high-end softwares. Additionally, it is also required to standardize the ID of the public control points and the UCPs for the automatic GNSS processing.

• Journal of the Korean Institute of Gas
• /
• v.28 no.1
• /
• pp.19-26
• /
• 2024

In workplaces handling flammable gas such as hydrogen, hazardous area is determined through KS C IEC 60079-10-1 standard. Because this standard determines the hazardous distance based on the release characteristic regardless of the type of gas, indoor/outdoor conditions, and atmospheric conditions, concerns are being raised about the effectiveness. In this study, simulations (PHAST, HyRAM) were performed to calculate the hazardous distance for hydrogen under various release characteristics and atmospheric conditions, and compared these results to IEC standard log-log graph. Also, we performed regression analysis according to each result. we found that the simulation results were 0.6 to 3.8 times less than the IEC standard, presented convenient linear regression equations. In addition, We confirmed that the results of hazardous distance varied based on wind velocity and atmospheric stability at the same release characteristic. In addition, we derived linear regression equations for release characteristics and hazardous distance that can be conveniently utilized. So, when classifying hazardous area in workplaces where they handle the hydrogen, the integrated graph and linear regression equation are helpful for confirming the hazardous area. Moreover, it is expected that the economic burden will be minimized by being able to classify reasonable hazardous area and to greatly reduce the risk of hydrogen explosion.

• Journal of Radiation Protection and Research
• /
• v.26 no.2
• /
• pp.119-132
• /
• 2001

This paper provides the basic technical and safety criteria to guide establishing the reference HLW geological repository system that has been developing based on the recommendations from the international organizations such as IAEA and ICRP as well as the comparison of the regulations of several leading countries in HLW disposal. The proposed criteria and guidelines were categorized by the basic principles and general criteria for the radiological safety and the functional criteria of the repository system components. They would be useful for the development of the national regulations and criteria for HLW disposal in the future. They, of course, will be revised based on the deep geological investigation in Korean Peninsular which will be implemented in the future.