• Title/Summary/Keyword: 기저모형

Search Result 231, Processing Time 0.027 seconds

Estimable functions of less than full rank linear model (불완전계수의 선형모형에서 추정가능함수)

  • Choi, Jaesung
    • Journal of the Korean Data and Information Science Society
    • /
    • v.24 no.2
    • /
    • pp.333-339
    • /
    • 2013
  • This paper discusses a method for getting a basis set of estimable functions of less than full rank linear model. Since model parameters are not estimable estimable functions should be identified for making inferences proper about them. So, it suggests a method of using full rank factorization of model matrix to find estimable functions in easy way. Although they might be obtained in many different ways of using model matrix, the suggested full rank factorization technique could be one of much easier methods. It also discusses how to use projection matrix to identify estimable functions.

Estimation of baseflow considering recession characteristics of hydrograph (수문곡선의 감수부 특성을 고려한 기저유출 산정)

  • Jung, Younghun;Lim, Kyoung Jae;Kim, Hungsoo
    • Journal of Wetlands Research
    • /
    • v.16 no.2
    • /
    • pp.161-171
    • /
    • 2014
  • Recession of hydrograph gives a significant contribution to estimation of baseflow using rainfall-runoff models and baseflow separation methods, because recession affects baseflow. This study attempted to enhance the accuracy of streamflow predictions using a Soil and Water Assessment Tool (SWAT) model and to separate baseflow from the predicted streamflow. For this, this study used two scenarios: 1) to calibrate eleven parameters using an auto-calibration tool with the alpha factor obtained from RECESS (S1); and 2) to calibrate twelve SWAT parameters including alpha factor (one of SWAT parameters) using an auto-calibration tool (S2). Then, baseflow spearation from the predicted streamflow was conducted by using Web-based Hydrograph Analysis Tool (WHAT). The results show that there is no significant difference between Nash-Sutcliffe efficiency (NSE) values of S1 and S2 for calibrations to streamflow. However, calibrations to baseflow showed that NSEs are 0.777 for S1 and 0.844 for S2, which means a significant difference. Quantitatively compared to the observed streamflow, relative errors were 20.78 % for S1 and 6.59 % for S2. Finally, this study showed the importance of recession in baseflow separated from the predicted streamflow using a rainfall-runoff model.

Application of K-BASINRR developed for Continuous Rainfall Runoff Analysis to Yongdam Dam Test Bed (장기유출해석을 위하여 개발된 K-BASINRR의 용담댐 시험유역 적용)

  • Kim, Yeonsu;Jung, Ji Young;Noh, Joonwoo;Kim, Sung Hoon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.211-211
    • /
    • 2017
  • 장기유출해석 모델은 수자원의 안정적인 확보와 이용, 유역단위 기초자료 조사관리 등을 위하여 수자원 장기종합계획 및 전국유역조사사업 등에 활용되고 있다. 주로 국외에서 개발된 모형이 활용되고 있어, 국내의 여건에 맞추어 편의성이 개선된 모형을 찾는 것은 매우 어려운 일이다. 또한, 유출해석을 수행하기에 앞서 지속적으로 업데이트된 모델에 대한 객관적인 평가를 수행한 사례는 드물다. 따라서, 본 연구에서는 국내에서 주로 활용되고 있는 장기유출해석모델(TANK, SWAT, SSARR, PRMS 등)에 대한 비교검토를 토대로 각종 사업과의 연계성, 계산의 효율성, 정확도 등을 고려하여 USGS에서 개발한 PRMS v.4.0.2를 기반으로 국내유역에 활용이 가능하도록 개선한 $K-BASIN^{RR}$ 및 입력자료 전처리기를 개발하였다. PRMS 모형은 융설 및 지하수 흐름 등 다양한 기능을 포함하여 강우유출 분석에 활용성 높은 모형으로 평가받고 있으나, 국내 OS환경 및 활용 단위계에서 활용성이 떨어지는 단점이 있다. 본 연구에서는 소스코드 개선 및 GUI구축을 통하여 PC 환경에서 구동이 쉽도록 재구성하였고, 사용자 편의성 확보를 위한 입력자료 전처리기를 개발함으로써 수자원단위지도 3.0, 임상도 재분류 테이블, 토양도 재분류 테이블의 DB화 및 모형의 구동을 위한 HRU분할, 입력자료 생성이 가능하도록 하였다. 매개변수 최적화를 위하여 하천 유량뿐만 아니라 기저유출량을 대상으로 Monte-Carlo 시뮬레이션 기반의 매개변수를 최적화 기능을 탑재하였다. 개발된 모형의 적용성 평가를 위하여 용담댐 시험유역을 대상으로 11년 간(2005-2015)의 강우 및 온도자료를 입력자료로 활용하여 모의한 결과 샘플의 개수에 따라 NSE(Nash-Sutcliffe Efficiency)를 0.9까지 추정이 가능함을 파악하였다. 또한, 유출량과 기저유출에 대하여 동시에 최적화를 수행하는 경우 NSE를 유출량에 대하여 0.8, 기저유출량에 대하여 0.6까지 추정이 가능하였다. 최적화된 모의 결과에 대한 검토를 위하여 계산증발산량을 측정증발산량과 비교한 결과, 유사한 패턴을 나타내는 것을 확인할 수 있었다. 본 연구에서 개발한 $K-BASIN^{RR}$을 활용하는 경우 장기유출해석 업무에 효율성 및 정확도를 향상할 수 있을 것으로 판단된다.

  • PDF

Analysis of Relation between Streamflow Variability and Baseflow Index (하천유량 변동성과 기저유출비의 관계분석)

  • Han, Jeong-Ho;Geum, Dong-Hyeok;Sin, Yong-Cheol;Im, Gyeong-Jae;Jeong, Yeong-Hun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.146-146
    • /
    • 2015
  • 하천관리는 직접유출과 기저유출로 구성된 하천유량의 특성을 이해하는 것으로부터 시작된다. 따라서 직접유출과 기저유출의 특성은 직접적으로 하천유량의 변동성으로 전달된다. 이러한 점을 고려했을 때 전략적인 하천관리를 위해서는 직접유출/기저유출과 하천유량의 관계를 분석하는 것이 필요하다. 이를 대해 본 연구의 목적은 하천유량의 변동성과 기저유출비(Baseflow Index, BFI)의 관계를 분석하고, 이러한 관계를 일관성 있게 나타낼 수 있는 하천유량 변동성 지표(Streamflow Variability Index, SVI)를 제시하는 것이다. 본 목적을 달성하기 위해 국내 총 91개 유량관측소를 대상으로 유황계수, R-B Index(Richards-Baker Flashiness Index), 변동계수(Coefficient of Variation), Q5:Q95 ratio 등의 SVI를 적용하였다. 이와 더불어, BFI를 산정하기 위하여 기저유출 분리 모형인 WHAT, PART, HYSEP, BFLOW를 사용하였다. 연구결과는 BFI값이 증가 할수록 SVI의 값은 감소하는 경향을 나타냈다. 다양한 SVI 가운데 BFI에 대한 R-B Index의 평균 결정계수가 0.66로 가장 큰 값을 나타냈으며, 특히 WHAT 모델의 Local Minimum Method(LMM)과의 결정계수가 0.82로 가장 밀접한 관계를 나타냈다. 변동계수 또한 평균 결정계수 값이 0.60으로 높은 값을 보였다. 그 외 유황계수와 Q5:Q95의 평균 결정계수는 각각 0.04와 0.07로 매우 낮은 값을 보였다. 결론적으로 다양한 SVI 가운데 R-B Index가 여러 기저유출 방법으로 산정된 BFI 값들에 대하여 가장 일관성 있는 결과를 보였다. 본 연구의 결과는 하천의 생태적 기능 유지와 치수안정성을 확보를 고려한 하천관리에 기여할 것이다.

  • PDF

Developing an Ensemble Classifier for Bankruptcy Prediction (부도 예측을 위한 앙상블 분류기 개발)

  • Min, Sung-Hwan
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.17 no.7
    • /
    • pp.139-148
    • /
    • 2012
  • An ensemble of classifiers is to employ a set of individually trained classifiers and combine their predictions. It has been found that in most cases the ensembles produce more accurate predictions than the base classifiers. Combining outputs from multiple classifiers, known as ensemble learning, is one of the standard and most important techniques for improving classification accuracy in machine learning. An ensemble of classifiers is efficient only if the individual classifiers make decisions as diverse as possible. Bagging is the most popular method of ensemble learning to generate a diverse set of classifiers. Diversity in bagging is obtained by using different training sets. The different training data subsets are randomly drawn with replacement from the entire training dataset. The random subspace method is an ensemble construction technique using different attribute subsets. In the random subspace, the training dataset is also modified as in bagging. However, this modification is performed in the feature space. Bagging and random subspace are quite well known and popular ensemble algorithms. However, few studies have dealt with the integration of bagging and random subspace using SVM Classifiers, though there is a great potential for useful applications in this area. The focus of this paper is to propose methods for improving SVM performance using hybrid ensemble strategy for bankruptcy prediction. This paper applies the proposed ensemble model to the bankruptcy prediction problem using a real data set from Korean companies.

Baseline Model Updating and Damage Estimation Techniques for Tripod Substructure (트라이포드 하부구조물의 기저모델개선 및 결함추정 기법)

  • Lee, Jong-Won
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.6
    • /
    • pp.218-226
    • /
    • 2020
  • An experimental study was conducted on baseline model updating and damage estimation techniques for the health monitoring of offshore wind turbine tripod substructures. First, a procedure for substructure health monitoring was proposed. An initial baseline model for a scaled model of a tripod substructure was established. A baseline model was updated based on the natural frequencies and the mode shapes measured in the healthy state. A training pattern was then generated using the updated baseline model, and the damage was estimated by inputting the modal parameters measured in the damaged state into the trained neural network. The baseline model could be updated reasonably using the effective fixity model. The damage tests were performed, and the damage locations could be estimated reasonably. In addition, the estimated damage severity also increased as the actual damage severity increased. On the other hand, when the damage severity was relatively small, the corresponding damage location was detected, but it was more difficult to identify than the other cases. Further studies on small damage estimation and stiffness reduction quantification will be needed before the presented method can be used effectively for the health monitoring of tripod substructures.

Evaluating Hydrologic Behavior of Hydrology Simulation using Time Area (HYSTAR) Model through Sensitivity Analysis (민감도 분석을 통한 분산형 연속 강우유출모형(HYSTAR)의 수문학적 거동 평가)

  • Her, Younggu
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.57 no.3
    • /
    • pp.41-54
    • /
    • 2015
  • 시간-면적 기법을 이용해 유역의 수문과정을 묘사하는 분산형 (distributed) 연속 (continuous) 강우유출모형인 HYSTAR의 거동특성과 주요 매개변수에 대한 민감도를 분석하였다. 유역의 수문조건에 따른 모형거동의 변화를 분석하기 위해 연속되는 4개의 개별 강우사상에 대한 민감도를 조사하고 비교하였다. 또한, 매개변수의 상호작용이 민감도 분석결과에 미치는 영향을 파악하기 위해 두 가지 서로 다른 기법 (one-factor-at-a-time 과 all-factor-at-a-time 방법)을 이용하여 산정된 민감도를 비교하였다. 분석결과, 모형의 직접유출량, 첨두유량 및 도달시간 모의결과는 유출곡선번호 (curve number)에 가장 민감하게 반응하는 것으로 나타났으며, 토양의 깊이, van Genuchten 식의 매개변수, 작물계수에 큰 영향을 받았다. 한편, 모의된 기저유출량은 토양의 깊이를 비롯하여 van Genuchten 식의 매개변수, 작물계수 (crop coefficient), 이방성계수 (anisotropic coefficient), 유출곡선번호의 변화에 민감하였다. 매개변수에 대한 민감도는 분석에 이용된 강우사상에 따라 다르게 나타났으며, 유역의 토양수분조건에 따라 다르게 거동하는 모형의 중요한 특성을 잘 반영하였다. 두 가지 서로 다른 기법을 이용한 민감도 분석결과는 모의된 직접유출량 및 기저유출량의 변화가 매개변수의 상호작용에 의해 제한될 수 있음을 보여 주었다. 본 연구는 HYSTAR 모형의 매개변수에 대한 민감도 분석을 통해서 해당 모형의 거동을 정량적으로 보여주었고, 이를 통해 모형의 건전성 (soundness)을 입증할 수 있는 하나의 근거를 제시하였다. 본 연구결과는 향후 HYSTAR 모형을 이용한 수문분석 시 보정을 위한 매개변수 선정에 활용될 수 있을 것으로 사료된다. 또한, 본 연구결과에서 나타난 민감도의 수문조건 (또는 선정된 강우사상)에 대한 의존성은 연속유출 모형의 민감도 분석을 위한 강우 사상 선정 및 민감도 분석결과의 해석에 유용한 정보를 제공할 수 있을 것으로 기대된다.

A Study on Baseflow Parameters Estimation of Tank Model (Tank 모형의 기저유출 매개변수 산정에 관한 연구)

  • Koo, Bo-Young;Jung, Il-Won;Bae, Deg-Hyo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.1970-1974
    • /
    • 2006
  • Tank 모형은 유역을 임의의 저류탱크로 가정하여, 유출공의 높이를 초과하는 저류고를 방출함으로써 유출량을 모의한다. 유출분석의 목적에 따라 직렬 3단 혹은 4단의 탱크로 구성하여 적용하는 것이 일반적인데, 국내의 일 단위 장기유출분석 연구에서는 직렬 4단 Tank 모형이 널리 활용되고 있다. 이러한 Tank 모형은 유역의 강우-유출관계를 모의하는 과정에 black box적인 특성을 지니고 있다. 그러나 각 저류탱크와 관련된 매개변수를 최적화하기 위해서는 매개변수들의 물리적인 의미를 이해하여야 한다. 이런 점을 고려하여 일본의 Sugawara는 경험적으로 매개변수들이 결정되는 범위를 제시한 바 있다. 그러나 기저유출을 모의하는 Tank 모형의 최하단 탱크에서 이러한 매개변수 범위에서는 적합한 값을 갖으나 장기적인 모의시에 저류고 및 유출고가 계속 증가하여 물리적인 유출특성을 반영하지 못하는 문제점이 나타났다. 따라서 본 연구에서는 이러한 문제점의 원인을 분석하기 위해 장기간의 자료가 구축된 소양강댐을 적용 유역으로 선정하여 최하단탱크의 유출공계수의 변화에 따른 유출량과 저류고의 변화를 살펴보았다. 분석결과 매개변수가 $0.0001{\sim}0.001$의 범위에서 장기간의 지속적인 저류고와 유출량의 증가가 나타났다. 그리고 유출공계수가 증가함에 따라 최대저류고는 감소하고, 저류고가 증가하는 지속기간이 짧아지는 것으로 나타났다. 그러나 통계치 변화분석에서는 상관계수, 평균제곱근오차, 모형효율성계수에서 거의 변화가 없는 것으로 나타났으며, 유출용적오차에서도 최대 약 6% 정도 유출용적이 변화하는 것으로 나타났다.mber)과 동일한 위치의 수온자료를 기초로 회귀분석을 실시함으로써 수온추출 알고리즘을 도출하여, 분석데이터의 신뢰도를 검증하였으며, 수온, 클로로필, 투명도 등을 위성원격탐사 자료와 GIS를 이용하여 공간분석을 실시하고, 공간분포도를 작성함으로써 대상해역의 해양환경을 파악하였다. 본 연구결과, 분석된 위성자료가 현장조사에 의한 검증이 이루어지지 않을 경우, 영상자료분석을 통한 표층수온 추출은 대기 중의 수증기와 에어로졸에 의한 계산치의 오차가 반영되기 때문에 실측치 보다 낮게 평가 될 수 있으므로, 반드시 이에 대한 검증이 필요함을 알 수 있었다. 현지관측에 비해 막대한 비용과 시간을 절약할 수 있는 위성영상해석방법을 이용한 방법은 해양수질파악이 가능할 것으로 판단되며, GIS를 이용하여 다양하고 복잡한 자료를 데이터베이스화함으로써 가시화하고, 이를 기초로 공간분석을 실시함으로써 환경요소별 공간분포에 대한 파악을 통해 수치모형실험을 이용한 각종 환경영향의 평가 및 예측을 위한 기초자료로 이용이 가능할 것으로 사료된다.염총량관리 기본계획 시 구축된 모형 매개변수를 바탕으로 분석을 수행하였다. 일차오차분석을 이용하여 수리매개변수와 수질매개변수의 수질항목별 상대적 기여도를 파악해 본 결과, 수리매개변수는 DO, BOD, 유기질소, 유기인 모든 항목에 일정 정도의 상대적 기여도를 가지고 있는 것을 알 수 있었다. 이로부터 수질 모형의 적용 시 수리 매개변수 또한 수질 매개변수의 추정 시와 같이 보다 세심한 주의를 기울여 추정할 필요가 있을 것으로 판단된다.변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이

  • PDF

오차분산의 추정에 대한 고찰

  • 김종태;고정환
    • Proceedings of the Korea Society for Industrial Systems Conference
    • /
    • 1999.05a
    • /
    • pp.185-190
    • /
    • 1999
  • 비모수 회귀모형에 있어서의 오차분산을 추정하는 방법들 중 차분에 기저한 방법(difference-based methods)을 이용한 기존의 추정량들을 비교 분석하는데 목적이 있다. 특히 점근적인 최적 이차차분에 기저한 Hall과 Kay, Titterington(1990)의 HKT 추정량에 대한 그들의 추정량에 대한 문제점들을 제시하고, HKT추정량과, GSJS 추정량, Rice 추정량에 대하여 모의실험을 이용하여 모수에 대한 수렴속도를 비교 분석하였다. 또한 GSJS 추정량에 대한 일치성과 수렴 속도를 보였다.

  • PDF

Estimation and assessment of baseflow at an ungauged watershed according to landuse change (토지이용변화에 따른 미계측 유역의 기저유출량 산정 및 평가)

  • Lee, Ji Min;Shin, Yongchun;Park, Youn Shik;Kum, Donghyuk;Lim, Kyoung Jae;Lee, Seung Oh;Kim, Hungsoo;Jung, Younghun
    • Journal of Wetlands Research
    • /
    • v.16 no.4
    • /
    • pp.303-318
    • /
    • 2014
  • Baseflow gives a significant contribution to stream function in the regions where climatic characteristics are seasonally distinct. In this regard, variable baseflow can make it difficult to maintain a stable water supply, as well as causing disruption to the stream ecosystem. Changes in land use can affect both the direct flow and baseflow of a stream, and consequently, most other components of the hydrologic cycle. Baseflow estimation depends on the observed streamflow in gauge watersheds, but accurate predictions of streamflow through modeling can be useful in determining baseflow data for ungauged watersheds. Accordingly, the objectives of this study are to 1) improve predictions of SWAT by applying the alpha factor estimated using RECESS for calibration; 2) estimate baseflow in an ungauged watershed using the WHAT system; and 3) evaluate the effects of changes in land use on baseflow characteristics. These objectives were implemented in the Gapcheon watershed, as an ungauged watershed in South Korea. The results show that the alpha factor estimated using RECESS in SWAT calibration improves the prediction for streamflow, and, in particular, recessions in the baseflow. Also, the changes in land use in the Gapcheon watershed leads to no significant difference in annual baseflow between comparable periods, regardless of precipitation, but does lead to differences in the seasonal characteristics observed for the temporal distribution of baseflow. Therefore, the Guem River, into which the stream from the Gapcheon watershed flows, requires strategic seasonal variability predictions of baseflow due to changes in land use within the region.