• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.979-986
• /
• 2022

In this study, the virtual exhibition using 3D architectural space was analyzed in terms of the viewer's experience. For this purpose, the analysis items of the virtual architectural space include whether the actual architectural space is reproduced, the introduction of surreal elements, the degree of freedom of movement and circulation, the level of photorealism of spatial expression, the level of reproduction of the exhibits and information provision method, and the interaction with other participants. Six virtual exhibition projects designed by a well-known architect were selected and analyzed. Three directions were found through the analysis. First, even when designing a virtual exhibition space with a high degree of freedom, there is a tendency to present a familiar architectural environment. Second, the current method of creating a virtual architectural space is that the method using a 360-degree rendering image and the method using a game engine coexist with pros and cons. Third, the interaction between participants in the virtual exhibition is implemented only by using a game engine. It is expected that the virtual space production environment using the game engine to be developed will become more advantageous in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.88-103
• /
• 2023

With the recent advancement of 4th Industrial Revolution technology, transportation systems are generating large amounts of mobility data related to the individual movement trajectories of vehicles and people. There are many constraints on utilizing mobility data containing personal information. Thus, in South Korea, the processing and generation of pseudonymized information and the analysis and utilization of this information have been managed in a dual manner by applying separate agencies and technologies through the revision of the Data 3 Act and the enactment of the Data Basic Act. However, this dual approach fails to securely support the entire data lifecycle and suffers from inefficiencies in terms of processing time and cost. Therefore, to compensate for the problems of the existing Expert Data Combination System and Data Safety Zone, this study proposes an Integrated Data Safety Zone Framework that integrates and unifies the process of generating, processing, analyzing, and utilizing mobility data. The integrated process for data processing was redesigned, and common requirements and core technologies were derived. The result is an architecture for a next-generation Integrated Data Safety Zone system that can manage and utilize the entire life cycle of mobility data at one stop.

• The Journal of Bigdata
• /
• v.7 no.2
• /
• pp.31-41
• /
• 2022

Steel is one of the most fundamental components to mechanical industry. However, the quality of products are greatly impacted by the surface defects in the steel. Thus, researchers pay attention to the need for surface defects detector and the deep learning methods are the current trend of object detector. There are still limitations and rooms for improvements, for example, related works focus on developing the models but don't take into account real-time application with practical implication on industrial settings. In this paper, a real-time application of steel surface defects detection based on YOLOv4 is proposed. Firstly, as the aim of this work to deploying model on real-time application, we studied related works on this field, particularly focusing on one-stage detector and YOLO algorithm, which is one of the most famous algorithm for real-time object detectors. Secondly, using pre-trained Yolov4-Darknet platform models and transfer learning, we trained and test on the hot rolled steel defects open-source dataset NEU-DET. In our study, we applied our application with 4 types of typical defects of a steel surface, namely patches, pitted surface, inclusion and scratches. Thirdly, we evaluated YOLOv4 trained model real-time performance to deploying our system with accuracy of 87.1 % mAP@0.5 and over 60 fps with GPU processing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.499-509
• /
• 2006

Precast concrete deck has many advantages comparing with the in-situ concrete deck, and has been successfully applied to replacement of the deteriorated decks and to the newly constructed highway bridges in domestic region. In order to apply the precast decks into the railway bridges, however, differences of the load characteristics between the highway and the railway should be properly taken into account including the train load, longitudinal force of the continuous welded rail, acceleration or braking force, temperature change and shrinkage. Proper level of the longitudinal prestress of the tendons that can ensure integrity of the transverse joints in the deck system is of a primary importance. To this aim, the longitudinal tensile stresses induced by the design loads are derived using three-dimensional finite element analyses for the frequently adopted PSC composite girder railway bridge. The effect of the temperature change is also investigated considering the design codes and theoretical equations in an in-depth manner. The estimated proper prestress level to counteract those tensile stresses is above 2.4 MPa, which is similar to the case of the highway bridges.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.230-238
• /
• 2023

Small and medium-sized food manufacturing enterprises are largely reliant on manual labor, from inputting raw materials to palletizing the final product. Recently, there has been a trend toward smartness and digitization through the implementation of robotics and sensor data technology. In this study, we examined the effectiveness of improvement through 3D simulation on two repetitive work processes within a food manufacturing company. These processes involve workers whose speed cannot match the capacity of the applied equipment. Two manual processes were selected: the weighing and packing process performed by workers after skewer assembly, and the manual batch process of counting randomly delivered frozen foods, packing (both internal and external), and palletizing. The production volume, utilization rate, and number of workers were chosen as verification indicators. As a result of the simulation for improving the 3D process, production increased by 13.5% and 56.8% compared to the existing process, respectively. This was particularly evident in the process of applying palletizing robots. In both processes, as the utilization rate and number of input workers decreased, robots could replace tasks with high worker fatigue, thereby reducing work overload. This study demonstrates the potential to visually compare the process flow improvement using 3D simulations and confirms the possibility of pre-validation for improvement.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.1057-1063
• /
• 2023

The urban railway sleeper floating track, the subject of this study, is an anti-vibration track to reduce vibration transmitted to the structure. currently, the replacement cycle of resilience pad for sleeper floating tracks is set and operated based on load. however, most previous studies were conducted on load-based structural safety aspects, such as fatigue life evaluation of sleeper anti-vibration pads and increase in track impact coefficient and track support stiffness due to increase in spring stiffness. therefore, in this study, we measure the vibration acceleration of the ballast for each analysis section and use the results of 7 million fatigue tests to calculate the spring stiffness of the resilience pad for each section. the spring stiffness of the resilience pad calculated for each section was set as the analysis data and the concrete vibration acceleration was derived analytically. the adequacy of analysis modeling was verified as the analyzed concrete bed vibration acceleration for each section was within the field-measured concrete bed vibration acceleration range. using the vibration acceleration curve according to the derived spring stiffness change, the spring stiffness of the resilience pad is estimated from the measured vibration acceleration. therefore, we would like to present a technique that can estimate the spring stiffness of resilience pad of a running track using the vibration acceleration of the measured concrete bed.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.430-436
• /
• 2023

Study on Changes in Vessel Traffic Services Due to Introduction of Maritime Autonomous Surface ShipsThe development of technologies related to Maritime Autonomous Surface Ships (MASS) has been actively progressing since the mid-2010s, focusing on themes such as collision avoidance, route planning, digital twin, and communication technologies. On the other hand, research on land-based infrastructure connected with MASS, such as logistics systems, port facilities, and vessel traffic services, has relatively received less attention. This study analyzed impact of emergence of MASS on existing vessel traffic service operations and proposed changes in control operations to prepare for its impact. To do this, current vessel traffic service operations were analyzed and elements of MASS technology that could affect vessel traffic control were identified. A survey was conducted among vessel traffic controllers to identify items related to the control of MASS. Results analyzed using the AHP method showed that preparation for emergency response and communication methods with MASS were the most important. Based on this, we were able to derive detailed plans for basic MASS control procedures and emergency response procedures based on data communication within maritime traffic control areas. MASS control procedures proposed in this study are expected to be used as a solution to resolve issues related to traffic safety of MASS in coastal areas.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.835-840
• /
• 2023

RFID(Radio Frequency Identification) systems are attracting attention as a key component of Internet of Things technology due to the cost and energy efficiency of application services. In order to use RFID technology in the IoT application service field, it is necessary to be able to store and manage various information for a long period of time as well as simple recognition between the reader and tag of the RFID system. And in order to read and write information to tags, a performance improvement technology that is strong and reliable in poor wireless channels is needed. In particular, in the UHF(Ultra High Frequency) RFID system, since multiple tags communicate passively in a crowded environment, it is essential to improve the recognition rate and transmission speed of individual tags. In this paper, Middleton's Class A impulsive noise model was selected to analyze the performance of the RFID system in an impulsive noise environment, and FM0 encoding and Miller encoding were applied to the tag to analyze the error rate performance of the RFID system. As a result of analyzing the performance of the RFID system in Middleton's Class A impulsive noise channel, it was found that the larger the Gaussian noise to impulsive noise power ratio and the impulsive noise index, the more similar the characteristics to the Gaussian noise channel.

• Archives of design research
• /
• v.17 no.2
• /
• pp.5-14
• /
• 2004

Introducing human capacities of control and sensation which have been overlooked into Human-Computer Interaction(HCI), Ubiquitous computing, Augmented Reality and others have been researched recently. New vision of HCI has embodied in Tangible User Interface(TUI). TUI allows users to grasp and manipulate bits with everyday physical object and architectural surface and also TUI enables user to be aware of background object at the periphery of human perception using ambient display media such of light, sound, airflow and water movement. Tangibles, physical object which constitutes TUI system, is the physical object embodied digital bit. Tangibles is not only input device but also the configuration of computing. To get feedback of computing result, user controls the system with Tangibles as action and the system represents reaction in response to User's action. User appreciates digital representation (sound, graphic information) and physical representation (form, size, location, direction etc.) for reaction. TUI's characters require the consideration about both user's action and system's reaction. Therefore we have to need the method to be concerned about physical object and interaction which can be combined with action, reaction and feedback.

• Archives of design research
• /
• v.20
• /
• pp.61-72
• /
• 1997

This study aims to promote understanding level for mathematical model, to improve methods and necessity of application in the process of product design and also to promote approaching and applying methods as a guideline for beginners. For the procedure and method of study first, it was emphasized by linking method and necessity of scientific analysis and a quality of product design and design process. Next, the corresponding relations between mathematical model and design probelem was desciebed, the mathematical model was examinated appeying process of product design. Lastly, approaching and applying methods for beginners was presented based on the discribed studied contents. As the result of the study, some points are by a result or problem : frist, the point that mathematical model is useful to grasp the design problems which various elements are complicately involved quantitatively and structurally, and its necessity can be especially utilized as a tool to justify and convince the convince the conclusion of the designer himself to the persons concerned. Second, the point that in order to apply mathematical model to the design process skillfully, first of all, the substance of all mathematical models which can be applid, and it is not easy to command in perfect method without using computer. Third, the point that since there are many kindsof mathematical models used is mathematical modeland the models which can be applidied to solve design problems differ in accordance with the design types and design process, its applying method can be presented as one kind of standardization or concretely. Fourth the point that in case of approaching mathematical model for the first time, it can start to select model corresponding with design type by stage of design process bassed on understanding for some mathematical knowledge and computer program.