• Journal of Digital Contents Society
• /
• v.17 no.6
• /
• pp.581-592
• /
• 2016

WebRTC has quickly grown to be the world's advanced real-time communication in several platforms such as web and mobile. In spite of the advantage, the current technology in WebRTC does not handle a big-streaming efficiently between peers and a large amount request of users on the Signaling server. Therefore, in this paper, we put our work to handle the problem by delivering the flow of data with dynamical load balancing algorithms. We analyze the request source users and direct those streaming requests to a load balancing component. More specifically, the component determines an amount of the requested resource and available resource on the response server, then it delivers streaming data to the requesting user parallel or alternately. To show how the method works, we firstly demonstrate the load-balancing algorithm by using a network simulation tool OPNET, then, we seek to implement the method into an Ubuntu server. In addition, we compare the result of our work and the original implementation of WebRTC, it shows that the method performs efficiently and dynamically than the origin.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.1
• /
• pp.151-180
• /
• 2015

South Korea is advancing the unmanned aircraft private commercial business. Unmanned aerial vehciles industry has been developing for several years also abroad. However, unmanned aerial vehciles industry, can be an accident occurs. Accident of unmanned aerial vehciles to occur material damage and casualties. Particularly if an accident because of a defect in the unmanned aerial vehciles has occurred, it is necessary to analyze the liability for this. The defect accidents unmanned aerial vehciles has been the different manufacturing and design product is intended, whether it is important how to prove to this. This is because, unmanned aerial vehciles are designed in any intent of the original, it is impossible to victims know. So imposing a responsibility to prove the design by the manufacturer intended consumer is not fair. Moreover, the consumer, it is necessary to prove only that the product is one that normally dangerous lacked safety can be expected. This is a detailed issue of judgment of defects of unmanned aerial vehciles, the manufacturer to bear the accountability. In the case where the defect on the display of the unmanned aircraft is a problem, and if it reasonable indication, it is not appropriate to be required to prove that it was possible to prevent damage to the victim.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.21 no.4
• /
• pp.49-66
• /
• 2010

The development of modern science and technology has a tremendous impact on culture and communication. Therefore a library that typically serves to collect, arrange and provide information is required to perform more diversified roles to stay abreast with changing modern society. Recent surge in demand for public library construction or remodeling is expected, but we still are in an actual condition that there is no model about the library spatial operation which considers the type and a service size of library. the purpose of this study is to examine the conditions for the rational and systematic spatial management of public library in today`s changing information society, to make a case study on the state of spatial management, and to suggest the efficient rearrangement of spatial component as a solution. In this study, for rapid assembly and remodeling business plan of the library can be referred to, we should do following things for the development of a standard model which has a rational space operations that correspond to the library features and services size. Firstly, analyze the space configuration of our nation's public libraries. Secondly, collect and analyze the libraries' spatial configuration in our nation and at abroad. Thirdly, define the next stretch of public library buildings by their types and develop a reasonable model as to the spatial configuration and present it.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.529-532
• /
• 2003

Efficiency and efficient management on maintenance/repair/operation (MRO) phase is getting important with advance in technologies and complex functionalities of building and facility. Using software systems as well as advanced hardware systems in MRO area is spreading along with this trend to take advantage of information technology. Information of building and facility for MRO phase is derived from engineering/procurement/construction (EPC) phase. But most current commercial software systems in EPC and MRO are focusing on their own phase, which arise lack of consistency of information from EPC to MRO phase. But, the information system now used at the MRO phase stop flowing the building and the facilities information and then newly create. Moreover, from all asset management point of view, asset particulars such as the structures and equipments are different the value fluctuation. In order to reflect these information rationally, the construction costs are correctly distributed and the initial price of the asset particulars have to be estimated. In this study, develop the information model which can apply the cost information at the EPC phase to the MRO phase.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.1 s.17
• /
• pp.99-106
• /
• 2004

Efficiency and efficient management on maintenance/repair/operation (MRO) phase is getting important with advance in technologies and complex functionalities of building and facility, Using software systems as well as advanced hardware systems in MRO area is spreading along with this trend to take advantage of information technology. Information of building and facility for MRO phase is derived from engineering/procurement/construction (EPC) phase. But most current commercial software systems in EPC and MRO are focusing on their own phase, which arise lack of consistency of information from EPC to MRO phase. But, the information system now used at the MRO phase stop flowing the building and the facilities information and then newly create. Moreover, from an asset management point of view, asset particulars such as the structures and equipments are different the value fluctuation. In order to reflect these information rationally, the construction costs are correctly distributed and the initial price of the asset particulars have to be estimated. In this study, develop the information model which can apply the cost information at the EPC phase to the MRO phase.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.1
• /
• pp.119-129
• /
• 2018

Companies' efforts to secure and sustain a competitive advantage in the market may also appear in the form of new product development. This has increased the importance of leveraging knowledge from other companies in a global competition that is accelerating with an accelerating product life cycle and the development of transportation and communications. In order to create valuable knowledge through the exchange and combination of knowledge, the absorptive capacity of the recipient of the knowledge should be considered as important, but also the knowledge protection tendency, which is characteristic of the knowledge transferor, should be considered. However, studies that considered these factors at the same time were very limited. This study examines the effect of suppliers 'absorptive capacity and buyer' s knowledge protection on new product development performance during the joint development of new products. In addition, we investigated the interaction effect between supplier's absorption capacity and buyer's knowledge protection tendency. For this purpose, data were collected for automobile industry, electronics industry and defense industry, where joint development of new products occurred frequently, and statistical verification was performed by regression analysis. The results showed that the absorptive capacity of the supplier was positively correlated with the performance of the new product development, and the buyer 's knowledge protection tendency had a negative relationship with the new product development performance. In addition, the absorptive capacity of the supplier and the buyer 's knowledge protection tendency have an interaction effect on the new product development result. These results suggest that suppliers' absorption capacity is an important factor in the joint development of new products, but suppliers with superior absorption capacity may have a negative impact on new product development performance if buyers have a negative attitude toward knowledge transfer.

• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.4
• /
• pp.348-354
• /
• 2016

Data stored in hospital information systems has a great potential to improve adequacy assessment and quality management. Moreover, an establishment of a data warehouse has been known to improve quality management and to offer help to clinicians. This study constructed a data mart that can be used to analyze antibiotic usage as a part of systematic and effective data analysis of infection control information. Metadata was designed by using the XML DTD method after selecting components and evaluation measures for infection control. OLAP-a multidimensional analysis tool-for antibiotic usage analysis was developed by building a data mart through modeling. Experimental data were obtained from data on antibiotic usage at a university hospital in Cheonan area for one month in July of 1997. The major components of infection control metadata were antibiotic resistance information, antibiotic usage information, infection information, laboratory test information, patient information, and infection related costs. Among them, a data mart was constructed by designing a database to apply antibiotic usage information to a star schema. In addition, OLAP was demonstrated by calculating the statistics of antibiotic usage for one month. This study reports the development of a data mart on antibiotic usage for infection control through the implementation of XML and OLAP techniques. Building a conceptual, structured data mart would allow for a rapid delivery and diverse analysis of infection control information.

• Annual Conference of KIPS
• /
• 2002.11c
• /
• pp.2383-2386
• /
• 2002

많은 ISP업체와 서버 관리자들은 자신의 시스템 향상을 위하여 많을 비용을 쏟아 붇고 있지만 그 결과는 비관적이다. 지금까지는 하드웨어적인 성능만을 고려하였으나, 최근에는 리눅스를 탑재하여 낮은 가격과 높은 가용성을 가지면서, 증가하는 네트워크 요청에 효과적으로 대응하기 위한 해결책으로 여러 대의 호스트로 구성되는 클러스터링 기술이 각광을 받고 있다. 또한 클러스터는 저렴한 호스트들로 구성되므로 구축 비용이 절감되는것 뿐만 아니라, 일부 호스트가 고장 나더라도 다른 호스트는 네트워크 작업 분담을 재설정하여 정상적으로 동작함으로 가용성이 항상 유지될 수 있다는 것을 보여준다. 최근 군에서도 정보화 과학화의 열풍에 힘입어 그 어느때보다도 업무의 전산화, 정보화에 박차를 가하고 있는 실정이다. 이로 인한 군업무에 적용되는 중대형 서버의 증가와 1인 1PC정책에 의한 클라이언트의 증가, 네트웍 인프라 구축에 심혈을 기울이고 있다. 그러나 사용자의 요구만큼 군환 경하에서의 정보화 업무를 감당하는 서버의 역량은 제한이 있다. 군업무의 특수성에 비추어 볼때에도 사회의 금융업무와 마찬가지로 중단없는 서비스의 수행과 서버의 안정화는 군전산의 가장 중요한 요소중의 하나임에 불구하고 아직까지도 현실성은 많이 미비한 상태이다. 본 연구는 이와 같은 문제를 해결하기 위하여 NAS와 SAN개념(네트웍기반)을 도입하여 군 서버 구축 새로운 패러다임을 제공하여 업무의 통폐합과 함께 서버의 통폐합의 전초단계인 무정지 클러스터링 서버의 구축방안을 제시하여 군정보화, 과학화의 초석을 다지는 계기로 삼고자 한다.위상변화에 대한 적응성을 높일 수 있도록 한다. SQL Server 2000 그리고 LSF를 이용하였다. 그리고 구현 환경과 구성요소에 대한 수행 화면을 보였다.ool)을 사용하더라도 단순 다중 쓰레드 모델보다 더 많은 수의 클라이언트를 수용할 수 있는 장점이 있다. 이러한 결과를 바탕으로 본 연구팀에서 수행중인 MoIM-Messge서버의 네트워크 모듈로 다중 쓰레드 소켓폴링 모델을 적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.1
• /
• pp.29-37
• /
• 2009

Recently, message based data transmission plays an important role in modem computing systems. Especially JMS(Java Message Service) is one of the most popular messaging platform. However, because of its characteristics for maintaining reliability, if we want to use it for transmission of large scale messages in a distributed Internet environment by using a WAN connection which may not be robust enough, we need to employ a different method to minimize total transmission time of messages. We found the fact that the total time of message transmission heavily depends on size of a message. In order to achieve the ideal size of a message, we develope a novel mechanism and a system which finds the ideal size of a message and automatical1y control JMS applications for minimizing transmission time. Finally, we test the proposed mechanism and system using real-data in order to prove advantages and compared with the naive mechanism. As a conclusion, we showed that our proposed mechanism and system provide an effective way to reduce transmission time of large scale messages in distributed environment.

• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.288-296
• /
• 2003

Generally, application of steel pipe pile as deep foundation member needs special requirement for the connection method between steel pipe pile and concrete footing. Even though two types of connection method are suggested in the related specification, type B-method is provident. To investigate real structural behavior of type B connection, several load tests are done with carefully designed experimental system. The purpose of this experiment is mainly focused on the understanding of actual behavior which can be predicted by design theory. At this research stage, vertical and lateral loading test are done for three types of specimen to review stress concentration, formation and behavior of imaginary RC column in the footing and effect of non-slip device installed in the steel pipe pile. The load resistance mechanism in these specific connection method is predicted based on both experimental results. The three-dimensional finite element modeling is also done for the purpose of comparison between numerical and experimental result. With all the results gained from experiment the structural behavior of imaginary RC column in the design concept is confirmed. The role of non-slip device is very important and it affects the resistance capacity with help of composite action of concrete and steel pipe pile.