• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.340-345
• /
• 2017

DNA 나노구조물을 설계 및 개발, 해석하기 위해서는 기본적인 홀리데이 연결(Holliday junction) 구조에 대한 물성을 아는 것이 필수적이다. 여러 실험 및 시뮬레이션을 통해서 홀리데이 연결 구조 물성을 측정하려는 시도가 많았지만, 아직까지도 홀리데이 구조에 대한 정확한 물성은 얻어지지 않았다. 이번 연구에서는 6HB-DNT 모델을 분자동역학 기법을 이용하여 DNT 모델의 물성을 분석하고, 이를 기반으로 유한요소 모델링을 통해 홀리데이 연결의 물성을 해석한다.

• Cement Symposium
• /
• no.32
• /
• pp.202-207
• /
• 2005

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.11a
• /
• pp.90-91
• /
• 2001

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.23-36
• /
• 1990

The various composite materials have been developed with the development of high strength material and the increasement of composite material usage. Therefore many researchers have studied about the stress analysis and the fracture mechanics for composite materials through the experiment or the theory. Among the experimental methods, the photoelastic experiments have been used for the stress analysis of the isotropic structures or the anisotropic structures. To analyze the stresses in the orthotropic material with photoelastic experiment, the basic physical properties ( $E_{L}$, $E_{T}$, $G_{LT}$ , .nu.$_{LT}$ ) and the basic stress fringe values ( $f_{L}$, $f_{T}$, $f_{LT}$ )are needed, therefore the relationships between the basic physical properties and the stress fringe values were derived in this paper. When the stress fringe value is very large, it was assured by the experiment that the relationships are established both in the room temperature and in the high temperature (T = 130.deg. C). Therefore the basic physical properties can be obtained from the relationships by measuring stress fringe values instead of measuring the basic physical properties.rties.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.90-91
• /
• 2004

최근의 재료개발 및 이용 경향은 복합화을 기본 개념으로 하여 광범위한 물성의 실현과 응용이 가능한 재료개발에 역점을 두어, 각 소재가 가진 서로 다른 우수한 물성을 유지하면서 상호 보완적인 효과를 살릴 수 있는 광의의 복합재료를 추구한다. (중략)

• Journal of the Korean Geotechnical Society
• /
• v.27 no.5
• /
• pp.61-74
• /
• 2011

This is a fundamental research on use as fill material of lightweight waste such as bottom ash and tire shred. We carried out the test for particle size distribution, specific gravity, density, shear strength, permeability and vertical compression settlement, considering water content change and temperature effect of several waste materials. Bottom ash, which is lighter than soils, has similar permeability and particle size distribution to those of weathered soils. But permeability may differ depending on the particle size distribution. The shear strength aspect of bottom ash and tire shred mixed materials are similar to that of natural fill materials. In the 1-D vertical compression settlement test, we could be assured that bottom ash and tire shred mixed materials showed similar compression settlement to that of sand under actual vertical stress. Furthermore, materials including bottom ash showed smaller compression settlement than that of weathered soils in the long-term settlement test under wetting and freezing-thawing condition.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.148-151
• /
• 2002

본 연구에서는 Ca, In, V, Al을 첨가 원소로 사용한 YIG 페라이트 분말을 분무건조기로 준구형 과립으로 만들어 일반적인 세라믹 제조 공정 방법으로 다결정 테를 제조하였고, 소결온도와 첨가원소의 조성비에 따른 YIG 페라이트의 기본물성과 전자기적 특성 변화를 조사하였다. 제조된 YIG 페라이트에 대한 기본 물성과 자기 특성을 밀도측정기, XRD, SEM, VSM, Network Analyzer 등을 이용하여 측정 분석하였다. $Y_{2.1}$C $a_{0.9}$F $e_{4.4}$ $V_{0.5}$I $n_{0.05}$A $l_{0.05}$ $O_{12}$ 조성의 YIG 페라이트에 대한 전자기적 특성 측정 결과 13$50^{\circ}C$에서 소결한 YIG 페라이트에서 우수한 삽입손실 값과 Isolation 값을 나타내였으며 이론밀도의 92%의 높은 밀도값을 가지며 높은 포화자화(4$\pi$Ms) 값을 지닌 우수한 전자기적 특성을 나타내었다.내었다.내었다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2003.04a
• /
• pp.167-171
• /
• 2003

최근 다양화된 합섬소재의 등장으로 인해 원사가 다양화되고 그에 따른 가공기술 등의 공정이 복잡해짐에 따라 이들 소재의 기본이 되는 원사의 물성이 중요시되고 있는 실정이다. 또한 고부가가치의 직물을 생산하기 위해서는 이들 원사의 특성뿐만 아니라 원사 이후의 공정 특히 사가공공정에서의 각 공정에 따른 사의 물성을 파악하는 것도 중요하다. 합섬 필라멘트의 경우 원사제조 후 제작준비와 제직, 염색ㆍ가공공정을 거치면서 여러 가지 습ㆍ건열 열처리 온도변화를 받게된다. (중략)

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.79-85
• /
• 2001

It goes to be serious with environmental pollution cause waste rubber. That is why there are lot of studies for efficient recycle. The purpose of this study is to improve the physical properties of EPDM powder by using De-link system. We changed on the size of waste rubber powder and De-link contents. we examined the physical, rheological, mechanical properties. And also examined cross-link state at various De-link. Also we carried out morphological studies after making the weather strip's feature by optical microscope.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.553-561
• /
• 2020

Water-soluble rubber asphalt-based waterproofing material, which is one of the waterproofing materials for building structures, is mainly used indoors (toilet, kitchen, balcony, etc.). In general, asphalt-based materials are used for non-exposed installation, rather than as exposed type as they do not deviate from their usual basic black pigmentation, and water-soluble rubber asphalt-based coating waterproofing materials are basically limited to indoors because of their low physical properties. Accordingly, in order to improve the tensile and elongation properties, a silane coupling agent, an inorganic filler, and a processor oil w ere added to improve the physical properties, and accordingly, the basic physical properties of the outdoor coating waterproofing material quality standard were analyzed. As a result, the water-soluble rubber asphalt coating waterproofing material compared with the exposure quality standard showed a result that exceeded the basic physical property quality standard of silicone rubber in all items under test evaluation, but the tensile strength and tear strength of the first class of urethane rubber were chloroprene. It was found that the performance compared to the quality standards of rubber-based tear strength was about 34.2% to about 40.8%.