• Title/Summary/Keyword: 기록관리기술개발

Search Result 274, Processing Time 0.027 seconds

Study on the Method for Data Interpolation using the Correlation among Runoff, Water Quality Concentration and Load (유출량, 수질 농도 및 부하량의 상호관계를 이용한 자료보간 방법에 관한 연구)

  • Oh, Chang-Ryeol;Jung, Woo-Cheol;Jin, Young-Hoon;Park, Sung-Chun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.1474-1478
    • /
    • 2007
  • 수문 및 수질자료는 일정한 기준에 의한 관측치를 시계열 자료로 기록하거나 전송할 때 다양한 형태의 오차가 발생하게 되며 또한 수문 및 수질자료를 관측하는 측정기기의 고장과 유지관리 등의 어려움으로 다양한 형태의 결측 자료가 발생하고 있다. 이와 더불어 수문 및 수질자료는 시공간적 변동성이 크며 비선형성이 강한 특성을 갖고 있다. 이러한 수문 및 수질 자료를 이용하여 모형을 구축할 경우 다양한 형태의 잡음에 대한 검증 및 잡음저감이 필수적 요건이라 할 수 있다. 따라서 본 연구에서는 영산강 유역의 본류부를 대표하는 나주지점에 대한 유출량과 총유기탄소(TOC) 농도 및 TOC 부하량 예측모형을 개발하였으며, 이를 위한 방법으로는 잡음저감을 위하여 웨이블렛 변환과 인공신경망을 적용하였다. TOC 부하량 자료는 유출량과 TOC 자료간의 함수로서 표현이 가능함에 따라 유출량 및 TOC 자료가 결측되었을 경우 역함수에 의한 계산으로 결측 자료에 대한 보간이 가능하다. 따라서 본 연구의 주안점은 잠음 저감 및 인공신경망에 의해 최적화된 예측 모형이 결측된 유출량과 TOC 자료에 대한 역함수로 정도있는 유출량과 TOC 자료 생성 가능성을 검토하고자 한다. 본 연구의 적용 결과, 유출량 자료가 결측되었을 경우 TOC 및 TOC 부하량 예측으로 유출량 자료에 대한 간접추정 및 결측 자료에 대한 보간의 정도를 평가한 결과 $R^2$는 0.99 이상의 값을 보였다. 또한, TOC 자료가 결측되었을 경우 역시 $R^2$는 비교적 우수한 0.97 이상의 값을 보였다. 따라서 본 연구에서 개발한 유출량 및 TOC, TOC 부하량 예측모형의 개발은 정도있는 유출량 및 TOC 수질 자료의 생성이 가능할 것으로 기대된다.한 물순환 해석을 할 수 있는 기반을 확보 하였으며, 가용한 장 단기간의 관측자료와 물수지 분석 연산식의 추정치를 바탕으로 관측자료에 의한 물수지 분석을 수행하였다. 분석 결과로 산지 소하천 유역인 설마천 시험유역의 각 수문요소의 물이동간의 정량적인 값을 알 수가 있었으며, 앞으로 추가적이고 지속적인 수문모니터링이 운영되고 물순환 해석 모형에 의한 검증이 수행된다면 정량적인 물순환 관계를 규명할 수 있을 뿐만 아니라 이와 관련된 수문요소기술을 확보할 수 있을 것이다.절한 타협과 조정을 필요로 한다. 그러나 절제의 한계를 넘어선다고 생각되거나, 조정의 노력이 불가능하거나, 실패했을 때 폭력적인 행동으로 나타나게 된다. 리차즈(I.A Richards)는 분노와 공포는 일단 겉잡을 수 없는 경향이 있다고 하면서 오늘날 폭력에 대한 요구가 일상의 정서 생활에 있어, 억압을 통한, 빈곤함을 반영하고 있지 않은지 생각해봐야 할 것이라고 충고한다. 조성 가이드라인(안)을 제시하였다.EX>$\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기소의 위치가 완전히 삭제되어 있다. 이러한 현상은 첫째, 15세기 중엽 경제적 태평과 함께 백자의 수요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에 걸림돌이 되었다. 둘째, 동기(銅器)의 대체품으로 자기를 만들어 충당해야할 강제성 당위성 상실로 인한 자기수요 감

  • PDF

The Construction and Common Use of Old Document DB in the Foreign Countries (해외 소장 고문헌의 DB구축과 공동활용 방안)

  • Kang, Soon-Ae
    • Journal of the Korean Society for Library and Information Science
    • /
    • v.42 no.3
    • /
    • pp.61-79
    • /
    • 2008
  • The purpose of this paper is to investigate the three aspects of the construction and common use of old document DB in the foreign countries: i) the processing of old documents, ii) the problem and improvement of DB systems of old documents. and iii) the common use of old document DB. Results from this research are as follows: The National Library of Korea(NLK) copied old documents in the foreign countries from 1982 to 2006 and published the brief catalog. The Reogang Publishing company issued four volumes catalogs of old document in Japan. The National Research Institute of Cultural Heritage(NRICH) investigated old books and published some catalogs of several organizations in Japan. America. France. and all. The National Institute of Korean History(NIKH) investigated old archives and published some catalogs of several organizations in Japan. The characteristics of the Korean Old and Rare Collection Information System(KORCIS) of the NLK, the Old Books Cultural Heritage in Overseas System of the NRICH. and the Korea History DB System and MF Catalog/ Image System of NIKH were described in the DB systems of old documents, the problems of DB systems were checked over and some alternatives were suggested. In the common use of old document DB, KORMARC format and description rules(draft) for archives should be revised to adopt a new standard such as KS editions. and all the institutes involved should thoroughly follow the standards. when creating bibliographic records and digitizing texts. It is necessary to educate and train the specialists of old documents. A government organization should be established to supervise all the procedures of developing technology for sharing digitized resources. using contents. and cooperating with the related internationl organizations and institutes.

A study on the Construction of a Big Data-based Urban Information and Public Transportation Accessibility Analysis Platforms- Focused on Gwangju Metropolitan City - (빅데이터 기반의 도시정보·접대중교통근성 분석 플랫폼 구축 방안에 관한 연구 -광주광역시를 중심으로-)

  • Sangkeun Lee;Seungmin Yu;Jun Lee;Daeill Kim
    • Smart Media Journal
    • /
    • v.11 no.11
    • /
    • pp.49-62
    • /
    • 2022
  • Recently, with the development of Smart City Solutions such as Big data, AI, IoT, Autonomous driving, and Digital twins around the world, the proliferation of various smart devices and social media, and the record of the deeds that people have left everywhere, the construction of Smart Cities using the "Big Data" environment in which so much information and data is produced that it is impossible to gauge the scale is actively underway. The Purpose of this study is to construct an objective and systematic analysis Model based on Big Data to improve the transportation convenience of citizens and formulate efficient policies in Urban Information and Public Transportation accessibility in sustainable Smart Cities following the 4th Industrial Revolution. It is also to derive the methodology of developing a Big Data-Based public transport accessibility and policy management Platform using a sustainable Urban Public DB and a Private DB. To this end, Detailed Living Areas made a division and the accessibility of basic living amenities of Gwangju Metropolitan City, and the Public Transportation system based on Big Data were analyzed. As a result, it was Proposed to construct a Big Data-based Urban Information and Public Transportation accessibility Platform, such as 1) Using Big Data for public transportation network evaluation, 2) Supporting Transportation means/service decision-making based on Big Data, 3) Providing urban traffic network monitoring services, and 4) Analyzing parking demand sources and providing improvement measures.

The Development and Application of Standard Diagnostic Table for Mountain Ginseng Management (산양삼 경영 표준진단표의 개발 및 현지 적용)

  • Jeon, Jun-Heon;Lee, Seong-Youn;Lee, Jung-Min;Ji, Dong-Hyun;Kim, Yeon-Tae;Kang, Kil-Nam
    • Journal of Korean Society of Forest Science
    • /
    • v.103 no.4
    • /
    • pp.622-629
    • /
    • 2014
  • This study aims to develop a standard diagnostic table for mountain ginseng so that the cultivators not only can check their current level of management with the table, but also can understand and address operational challenges better by themselves utilizing the table. The standard diagnostic table consists of 3 categories and 18 subcategories to diagnose the general status of forestry households, the indicators of management performance and the level of management. To develop the table, the study conducted a survey on the actual condition of management, targeting 81 forestry households throughout 15 municipalities including Mu-ju, Jeollabukdo, and Ham-yang, Gyeongsangnamdo, all of which are the chief producing districts of mountain ginseng. Then, the study calculated total scores by regions by aggregating the scores of 18 subcategories, in order to evaluate and compare the management level among regions based on the scores. According to the result, the average score of 81 forestry households was 57.2 point-58% of which surveyed belonged to the range of 40-60 point. Compared by regions, the average score of Jeollabukdo regions was 52.9 point, the lowest, and that of Gyeongsangnamdo regions was 61.4 point, the highest. It is remarkable that among the indicators of management base, the average score of 'mounding (the height of mound)' item was recorded rather low with 1.59 point, reflecting the fact that the cultivators tend to raise mountain ginseng with no additional mounds. As for the indicators of production skills, the average score of the pest control item was remarkably low with 1.28 point. Over 90% of cultivators answered that they do not usually forecast or survey the pest disease in advance. Meanwhile, it is also noticeable that the item of sowing and planting methods, and the item of seed were both rather high, recording 4.00 and 4.47 point respectively. As for the item of management and sales skill, however, the score was rather low with 2.20 point, meaning that the forestry households still have a low interest in the business management.

Crafting a Quality Performance Evaluation Model Leveraging Unstructured Data (비정형데이터를 활용한 건축현장 품질성과 평가 모델 개발)

  • Lee, Kiseok;Song, Taegeun;Yoo, Wi Sung
    • Journal of the Korea Institute of Building Construction
    • /
    • v.24 no.1
    • /
    • pp.157-168
    • /
    • 2024
  • The frequent occurrence of structural failures at building construction sites in Korea has underscored the critical role of rigorous oversight in the inspection and management of construction projects. As mandated by prevailing regulations and standards, onsite supervision by designated supervisors encompasses thorough documentation of construction quality, material standards, and the history of any reconstructions, among other factors. These reports, predominantly consisting of unstructured data, constitute approximately 80% of the data amassed at construction sites and serve as a comprehensive repository of quality-related information. This research introduces the SL-QPA model, which employs text mining techniques to preprocess supervision reports and establish a sentiment dictionary, thereby enabling the quantification of quality performance. The study's findings, demonstrating a statistically significant Pearson correlation between the quality performance scores derived from the SL-QPA model and various legally defined indicators, were substantiated through a one-way analysis of variance of the correlation coefficients. The SL-QPA model, as developed in this study, offers a supplementary approach to evaluating the quality performance of building construction projects. It holds the promise of enhancing quality inspection and management practices by harnessing the wealth of unstructured data generated throughout the lifecycle of construction projects.

Manufacture of Daily Check Device and Efficiency Evaluation for Daily Q.A (일일 정도관리를 위한 Daily Check Device의 제작 및 효율성 평가)

  • Kim Chan-Yong;Jae Young-Wan;Park Heung-Deuk;Lee Jae-Hee
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.17 no.2
    • /
    • pp.105-111
    • /
    • 2005
  • Purpose : Daily Q.A is the important step which must be preceded in a radiation treatment. Specially, radiation output measurement and laser alignment, SSD indicator related to a patient set-up recurrence must be confirmed for a reasonable radiation treatment. Daily Q.A proceeds correctness and a prompt way, and needs an objective measurement basis. Manufacture of the device which can facilitate confirmation of output measurement and appliances check at one time was requested. Materials and Methods : Produced the phantom formal daily check device which can confirm a lot of appliances check (output measurement and laser alignment. field size, SSD indicator) with one time of set up at a time, and measurement observed a linear accelerator (4 machine) for four months and evaluated efficiency. Results : We were able to confirm an laser alignment, field size, SSD indicator check at the same time, and out put measurement was possible with the same set up, so daily Q.A time was reduced, and we were able to confirm an objective basis about each item measurement. As a result of having measured for four months, output measurement within ${\pm}2%$, and measured laser alignment, field size, SSD indicator in range within ${\pm}1mm$. Conclusion : We can enforce output measurement and appliances check conveniently, and time was reduced and was able to raise efficiency of business. We were able to bring a cost reduction by substitution expensive commercialized equipment. Further It is necessary to makes a product as strong and slight materials, and improve convenience of use.

  • PDF

Technology for Improving the Uniformity of the Environment in the Oyster Mushroom Cultivation House by using Multi-layered Shelves (느타리버섯 균상재배사의 환경균일성 향상을 위한 기술 개발)

  • Lee, Sunghyoun;Yu, Byeongkee;Kim, Hyuckjoo;Yun, Namkyu;Jung, Jongcheon
    • Journal of Bio-Environment Control
    • /
    • v.24 no.2
    • /
    • pp.128-133
    • /
    • 2015
  • Mushrooms can grow in nature when adequate temperature and humidity are maintained, but such condition can be satisfied for only a short period of time on an annual continuum. Therefore, it can be deemed that a majority of the distributed mushrooms in the current market are produced in an artificially manipulated environment. This study was conducted to resolve the problem of the Oyster mushroom cultivation house's internal temperature and humidity imbalance, where the Oyster mushrooms are cultivated in a multi-layered shelves. The air circulation fans were installed to improve the air uniformity of the Oyster mushroom cultivation house by using multi-layered shelves. During the experiment, the ambient temperature and the ambient relative humidity ranged from $5.2^{\circ}C$ to $20.4^{\circ}C$ and 40% to 100% respectively. Due to the change of the outdoor temperature, the internal temperature of the Oyster mushroom cultivation house also changed, ranging from $13.3^{\circ}C$ to $18.4^{\circ}C$, but the temperature gap between the different internal location of the facility during the conforming recorded time only ranged from $0.2^{\circ}C$ to $1.3^{\circ}C$, being significantly stable. The internal relative humidity, ranging from 82% to 96%, also changed due to the change of the outdoor temperature. Nevertheless, the relative humidity gap between the different internal location during the conforming recorded time only ranged from 2% to 7%. Furthermore, the research staff were able to maintain the concentration of $CO_2$ from 575ppm to 731ppm(below 1,000ppm was the goal) indicating the possibility of an even management of the internal environment by installing the air circulation fan.

HOME NURSING CARE NEEDS IN RURAL KOREA (한국 농촌 지역의 가정간호 요구에 관한 연구)

  • KIM, SUNG SILL
    • Journal of Korean Academy of Nursing
    • /
    • v.18 no.1
    • /
    • pp.44-69
    • /
    • 1988
  • 보건의료기술이 고도로 발달되었다 하더라도 의료의 혜택이 필요할 때 누구에게나 언제든지 제공될 수 없는한 전체 국민의 건강요구를 포괄적으로 충족시킬 수 있는 제도나 방법이 필요하게 된다. 본 연구는 사회 집단의 최소 단위인 가정을 중심으로 수행되고 있는 지역사회 가정간호의 합리적 수행에 필요한 기초자료를 얻기 위하여 가정간호 요구의 사정 및 가정간호 수행에 관하여 연구하였다. 가정 간호(Home Nursing Care, Home Health Care)는 추후관리를 받아야 할 대상자, 고령자, 만성질환자에게 규격화되어 있는 병원간호를 가정이라는 친숙한 분위기에서 개별적으로 제공되는 가정 중심의 심리적 안정은 물론 시간과 경비를 절감하는 효과적 간호수단이다. 본 연구의 목적은 첫째 우리나라 농촌가정의 가정간호의 요구는 무엇이며 그 요구의 원인은 무엇인가\ulcorner 둘째, 농촌가정에서 가지고 있는 상병에는 어떠한 것이 있으며 행하여 지고 있는 가정간호의 내용에는 어떤 것들이 있는가\ulcorner 셋째, 가정간호 수행자는 누구이며 이에 대한 수혜자의 만족도는 어느 정도인가\ulcorner 본 연구의 방법은 1985년 6월 18일 부터 8월 7일 까지 C군에 거주하는 주민중 11개소 보건진료소가 소재한 반의 주민 전체 1,027명 중 상병자 159명과 30세 이상의 인구 440명, 가구주 239명을 대상으로 가정방문을 통한 면접으로 질문지를 기록케 하여 자료를 수집하였다. 연구의 도구는 첫째 간호요구의 측정을 위한 도구로 Virginia Henderson의 기본간호활동 14가지를 기초로 지역주민 50명과 현직 간호원 50명에게 개방질문으로 얻은 내용을 중심으로 제작하였으며 둘째, 가정간호수행에 대한 도구로 Orem의 간호이론 중 간호방법 5가지를 근거로 개발하였다. 본 연구의 내용은 보건진료원에 의하여 사정된 간호요구와 그 원인들을 인간의 기본요구 영역별로 분류하여 가정간호진단을 위한 지역사회 가정간호사정 및 진단도구로 쓸 수 있도록 개발하였으며, 상병자에 대한 가정간호 수행은 수행빈도와 수행내용에 따른 수행자와 수행 만족도를 측정하였다. 1. 가정간호요구에 대하여 1) 가정간호요구 측정은 신체영역 중 몸을 청결히 하고 몸차림을 단정히 하여 피부를 보호하기 내용에서 더위나 추위에 대하여 옷을 맞추어 조절하기의 요구, 적절한 식사와 수분섭취하기 내용에서 배변의 요구, 또한 몸을 움직이고 바람직한 체위를 유지하기 내용에서 한가지 자세를 계속하기의 요구가 높았고 정상호흡하기 내용에는 일상활동시 호흡에 대한 요구가 높은 편이었다. 사회, 심리, 영적 간호요구 영역에서는 자신이 신앙에 따라 예배하기 내용에서 신앙으로 어려움을 극복하려는 요구가 높았으며 여러가지 오락의 형태를 취하여 이에 참여하기 내용에서는 취미생활의 요구가 높았다. 2) 가정간호요구는 연령이 높을수록 높았고 성별로는 여자의 가정간호요구가 남자보다 높았으나 내용별 요구의 차이는 없었다. 2. 가정간호수행에 대하여 1) 가정에서 수행되는 가정간호내용으로는 직접간호가 가장 많이 수행되었으며 내용으로는 구강청결, 옷 갈아 입기, 투약, 음식투여, 대ㆍ소변보기의 빈도가 많았다. 건강한 환경제공의 간호수행내용에서는 적당한 실내온도 유지하기의 빈도가 많았으며 안내와 지도내용에서는 투약요령 알기의 빈도가 많았으며, 보호와 지지내용과 교육의 간호수행내용에서는 현 상태 인정하기와 투약 방법에 대한 교육하기의 간호수행빈도가 가장 많았다. 2) 간호수행자에 있어서 직접간호 수행은 본인 스스로 하는 빈도가 가장 많았으며 안내와 지도 및 교육의 간호수행은 전문가가 많았고 보호와 지지간호는 가족이 많았고 건강한 환경제공간호는 배우자에서 더 많았다. 3) 간호수행자에 대한 만족도는 직접간호 방법에서는 가족이, 안내와 지도는 배우자가, 보호지지, 건강한 환경제공 및 교육에서는 전문가에 의한 간호수행 만족도가 높았다. 4) 상병상태에 따른 주 증상은 관절통 요통이 가장 많았고 상병자는 남자가 많았고 주 중상에 대한 성별간의 큰 차이는 없었다. 이상 가정간호요구와 정도 및 가정간호 수행의 내용을 기반으로 가정간호사업의 시행이 시급하다는 결론을 내릴 수 있었으며 가정간호사업의 시행을 위한 제도적 보완개선책이 요구된다고 결론을 지을 수 있다.

  • PDF

Web Learning Systems Development based on Product Line (프로덕트 라인 기반의 웹 학습 시스템 개발)

  • Kim Haeng-Hon;Kim Su-Youn
    • The KIPS Transactions:PartD
    • /
    • v.12D no.4 s.100
    • /
    • pp.589-600
    • /
    • 2005
  • Application developers need effective reuseable methodology to meet rapidly changes and variety of users requirements. Product Line and CBD(Component Based Development) offer the great benefits on quality and productivity for developing the software that is mainly associate with reusable architectures and components in a specific domain and rapidly changing environments. Product line can dynamically focus on the commonality and variety feature model among the products. The product line uses the feature modeling for discovering, analyzing, and mediating interactions between products. Reusable architectures include many variety plans and mechanisms. In case of those architecture are use in product version for a long time, It is very important in architecture product line context for product line design phase. Application developer need to identify the proper location of architecture changing for variety expression. It is lack of specific variety managements to design the product line architecture until nowdays. In this paper, we define various variety types to identify the proper location of architecture changing for variety expression and to design the reusable architecture. We also propose architecture variety on feature model and describe variety expression on component relations. We implemented the web learning system based on the methodology. We finally describe how these methodology may assist in increasing the efficiency, reusability, productivity and quality to develop an application. In the future, we are going to apply the methodology into various domain and suggest international and domestic's standardization.

Research Trends and Future Directions for R&D Vitalization of Domestic Dairy Industry (국내 유가공산업의 R&D활성화를 위한 연구 동향과 방향)

  • Yoon, Sung-Sik
    • Journal of Dairy Science and Biotechnology
    • /
    • v.29 no.1
    • /
    • pp.23-31
    • /
    • 2011
  • Domestic dairy industry is now standing at the crossroad for planning next fifty years, mainly because economic and environmental situations surrounding Korean peninsula are fast changing. For the aspects of dairy consumption, fresh milk consumed less, while consumption of the other milk and dairy products is slightly increasing every year. In 2010, it is approximately estimated that 1,939,000 tons of raw milk was used and the supply would be short by about 35,000 tons, based on the amounts in the previous year. Currently, multilateral negotiations against US and EU are underway. When it will be in effect in the future, significant damage would be expected in the dairy and livestock sectors, leading to cut domestic milk supply. Quality of farm-gate milk is graded as 1A on average 90% or more, loaded with very low in microbial and somatic cell counts. Therefore, policy implications have to be placed toward switch currently the UHT processing method to Pasteurization or the LTLT technology, by which natural flavors and nutrients in milk mostly remain after heat treatment. Domestic cheese products comprise only 10% and the rest is occupied by the various kinds of imported natural products. The market size keeps increasing up to 65,423,000 tons last year. When it comes to vitalization of our natural cheese industry, cheese whey, which is a main by-product in cheese manufacture, is a critical issue to be solved and also "On-Farm Processing" would be combined with a growth of big dairy companies when few immediate issues among the relevant regulations will be eased and alleviated in the near future. Fermented milk market is recorded as a single area of gradual increase in the past 10 years, Korea. Fermented yogurts with health claims targeted stomach, liver, and intestine are popular and has grown fast in sales amounts. In this context, researches on beneficial probiotic lactic acid bacteria are one of the important projects for domestic milk and dairy industries. Labelling regulations on efficacy or health-promoting effects of functional dairy products, which is the most important issue facing domestic dairy processors, should be urgently examined toward commercial expression of the functionality by lawful means. Colostrum, a nutrition-rich yellowish fluid, is roaded with immune, growth and tissue repair factors. Bovine colostrum, a raw material for immune milk preparations and infant formula, can be used to treat or prevent infections of the gastrointestinal tract. Nanotechnology can be applied to develop new milk and dairy products such as micro-encapsulated lactase milk for consumers suffering lactose intolerance. Raw milk is suggested to be managed by its usage in the processing line because imbalance of supply and demand is structural problem in every country and thus the usage systems as in the advanced dairy countries is worth of bench-marking to stabilize milk supply and demand. Raw milk produced is desirable to divide into the three parts; domestic, import, and buffering purposes. It is strongly recommended that a domestic dairy control center as an institutional framework should be urgently established as is Dairy Board in New Zealand and Australia. Lastly, government policy should be directed to foster the highly-educated people who are majoring in Dairy Sciences or working in the dairy industry by means of financial support in studying and training abroad as well.

  • PDF