• Title/Summary/Keyword: 기대폭

Search Result 535, Processing Time 0.033 seconds

Improved usability by improving EPANET2 Toolkit (EPANET2 Toolkit 개선을 통한 활용성 향상)

  • Son, Won Il;Kim, Kang Min;Kang, Doosun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.309-309
    • /
    • 2017
  • EPANET은 U.S. EPA(U.S. Environmental Protection Agency, 미 환경청)에서 개발한 상수관망 시스템의 수리해석 모의 프로그램으로서, 다양한 상수관망의 설계 및 운영을 모의하기 위해 세계적으로 활발히 활용되고 있다. EPANET 프로그램은 사용자 친화적인 GUI(Graphic User Interface) 환경으로 개발되었으며, 직관적인 네트워크 요소와 폭 넓은 모의 옵션을 제공한다는 장점이 있다. 특히, 상수관망의 실무 및 연구 분야에서는 공학용 분석프로그램과 프로그래밍 언어의 활용이 활발해짐에 따라, 이를 EPANET 프로그램과 연계시킬 수 있는 EPANET Toolkit이 개발되면서 그 활용도는 계속해서 확장될 전망이다. 그러나 지속적인 보완에도 불구하고, 기존의 EPANET Toolkit에서 제공하고 있는 기능은 EPANET 프로그램을 전부 반영하지 못하고 있어 실용성 있는 프로그램의 개발이 제한되고 있는 실정이다. 기존 연구에서는 EPANET Toolkit의 미비한 기능에 대해, "프로그램 수행 - 결과 확인 - EPANET 네트워크 수정"을 반복 수행하여 문제를 해결하였으며, 따라서 복잡하고 세밀한 상수관망 모의 연구에 많은 제약이 존재하였다. 본 연구에서는 EPANET Toolkit의 내부를 수정, 보완하여 기존에 고려하지 못하였던 다양한 기능을 추가하여 관련 연구에 활용할 수 있도록 하였다. 구체적으로는 Pump Curve를 변경 및 입력하여 Pump 교체를 위한 최적 펌프용량을 결정하거나, Energy Pattern을 입력하여 손쉽게 전력비용을 산정하는 등의 기능이 개선되었다. 그밖에도 EPANET Toolkit의 활용성을 향상시키기 위한 다양한 함수들을 추가적으로 구성하였으며, 이는 펌프 용량 및 효율 곡선과 배수지 설계 등 상수관망 구성요소의 설계에도 폭 넓게 활용할 수 있을 것으로 기대된다.

  • PDF

Estimation of streamflow using river characteristics and satellite images (하천특성 및 위성영상을 활용한 하천유량 추정)

  • Chung, Soo-Un;Jang, Chang-Lae;Jung, Kwansue
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.36-36
    • /
    • 2021
  • 최근 기후변화로 인한 집중홍우 등으로 홍수 등 재난이 증가하고 있으며, 이를 과학적으로 조사하고 분석하기에는 공간적으로 범위가 넓다. 특히, 미계측유역은 자료를 수집하고 정량적으로 분석 및 예측하는 데에는 한계가 많은 실정이다. 따라서 본 연구에서는 위성영상 자료를 활용하여, 하천폭, 수면경사, 수위 등 자료를 추출하고, 이를 유량조사를 수행한 지점의 자료와 비교하여 수리 기하적 상관성을 분석하였다. 특히, 하도특성을 고려하여 중·하류로 구분하고 유량과 수리기하 학의 관계를 분석하였다. 위성영상 중 취득이 용이한 Sentinel 자료를 선별하여 수리특성인자를 추출하였다. 영상자료의 해상도가 20 m이며, 자료의 한계에 따른 하천폭, 경사, 수위에 대한 유효 기준을 제시하고 경사가 완만하고 하폭이 넓은 대하천에 적용하였다. 그리고, 하천수리인자 특성을 입력변수로 하는 유량을 추정하기 위한 회귀모형을 구축하고, 모의유량과 실측유량을 비교하여 그 적용성을 평가하였다. 개발된 모형은 규모가 유사한 시험유역을 미계측 유역으로 간주하여 평균제곱근오차(RMSE) 와 평균절대오차(MAE)를 이용하여 정확도를 추정하였다. 본 연구를 통해 주요하천의 수리기하 특성을 통계화하고 유량과의 특성을 도출하여 국내하천의 특성을 범주화 할 수 있었고, 미계측 유역에서의 유량을 원격탐사와 같은 간접적인 방법을 통해 추정하고 적용할 수 있을 것으로 기대된다.

  • PDF

Analysis of Spatial Characteristics and Hydrological Response of Urban Drainage Network Layout (도시유역 배수관망 구성의 공간특성과 수문반응 분석)

  • Hwang, Junshik;Kwon, Youjeong;Seo, Yongwon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.34-34
    • /
    • 2020
  • 도시유역의 배수관망은 강우로 인하여 발생되는 유역내의 유출수를 최대한 빨리 배수하도록 설계되어져 왔다. 하지만 최근 연구결과에 의하면 도시의 모든 지역의 배수관망이 유입수를 빨리 배수할 수 있는 형태로 구성되지 않는 것을 보여준다. 즉 유역에는 다양한 형태의 배수망이 존재하며, 이러한 배수망 구성으로 인하여 수문반응들이 변할 수 있다는 것을 의미한다. 금회 연구에서는 이러한 현상들을 분석하기 위하여 Gibbs 모형의 β값을 이용하여 161,700가지의 다양한 배수망을 상류, 중류, 하류 적용하여 배수망 구성에 따른 수문반응을 검토하였다. 배수관망을 구성하는 β값의 범위를 작게 하였을 경우 유역의 크기에 상관 없이 첨두홍수량 차이는 아주 미미한 것으로 분석되었다. 하지만 실제 유역의 β값 구성을 참조하여 분석한 경우에는 상류에서 하류로 갈수록 높은 β값을 가지는 경우 그 반대의 경우에 비하여 11% 첨두홍수량을 저감할 수 있는 것으로 분석되었다. 즉 실제 도시유역의 배수관망 구성을 변화시킬 경우 첨두홍수량의 저감을 기대할 수 있는 것으로 판단된다. 또한 금회 연구는 아직 실제 유역에 대한 적용을 하기 전의 상태로 금회 분석한 결과가 실제유역에서의 반응을 대표할 수는 없지만, 유역의 특성을 나타내는 폭함수를 이용한 결과로서 실제 유역적용시 첨두홍수량 저감에 대한 효과가 있을 것으로 판단된다.

  • PDF

The study of binocular function of college students (대학생들의 시기능에 대한 연구)

  • Cho, Young-Rae;Park, Hyun-Ju;Seo, Ji-Keun;Seong, Jeong-Sub;Kim, Jae-Min
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.10 no.2
    • /
    • pp.103-110
    • /
    • 2005
  • Binocular vision had a short history in Korea. As there were many near works in these days, the needs about comparative study have been increased. There was related to both refractive error and binocular anomalies, but it is difficult to applying for binocular vision expected findings in itself due to the fact that Korean differ from foreigner. Objects were 100 adults in 18-36 years old ages, The test was Von Gaefe method and used aparatus was phoropter(Shinnippon VT10)and visual chart(Shinnippon CT30). According to interview results was that symptom in near works were headaches 28.0%, blinking 27.3%, red eye 25.1%, eyepain 15.6%, watering 15.3%, itch 12.2%, photophobia 8.5% and eye strain 7.4%. A people who have above ${\pm}0.50$ D refractive error in total objectives (100-male 45/female 55) were classified into ametropia. There was a results such as emmetropia (12.0%), ametropia(88.0%), exophoria(32.0%), esophoria(12.0%). Far negative relative convergence were that in case of high 43.0%, in case of low 7.0%. Far positive relative convergence were that in case of high 15.0%, in case of low 38.0%. Near phoria was exophoria(32.0%), esophoria(12.0%). Near negative relative convergence were that in case of high 23.0%, in case of low 38.0%. Far positive relative convergence were that in case of high 29.0%, in case of low 23.0%. Near negative relative accommodation were that in case of high 10.0%, in case of low 14,0%, Far positive relative convergence were that in case of high 69.0%, in case of low 12.0%. Results were different from expected findings, and especially positive relative accommodation was very high, However, We suggest that the expected findings in Korea for several subjects must study in binocular function.

  • PDF

A Study on 16/32 bit Bi-length Instruction Set Computer 32 bit Micro Processor (16/32비트 길이 명령어를 갖는 32비트 마이크로 프로세서에 관한 연구)

  • Cho, Gyoung-Youn
    • The Transactions of the Korea Information Processing Society
    • /
    • v.7 no.2
    • /
    • pp.520-528
    • /
    • 2000
  • he speed of microprocessor getting faster, the data transfer width between the microprocessor and the memory becomes a critical part to limit the system performance. So the study of the computer architecture with the high code density is cmerged. In this paper, a tentative Bi-Length Instruction Set Computer(BISC) that consists of 16 bit and 32 bit length instructions is proposed as the high code density 32 bit microprocessor architecture. The 32 bit BISC has 16 general purpose registers and two kinds of instructions due to the length of offset and the size of immediate operand. The proposed 32 bit BISC is implemented by FPGA, and all of its functions are tested and verified at 1.8432MHz. And the cross assembler, the cross C/C++ compiler and the instruction simulator of the 32 bit BISC are designed and verified. This paper also proves that the code density of 32 bit BISC is much higher than the one of traditional architecture, it accounts for 130~220% of RISC and 130~140% of CISC. As a consequence, the BISC is suitable for the next generation computer architecture because it needs less data transfer width. And its small memory requirement offers that it could be useful for the embedded microprocessor.

  • PDF

A Study on the Strength Evaluation of Rectangular Steel Tubular Columns Infilled with High Strength Concrete (고강도콘크리트 충전 각형강관기둥의 내력평가에 관한 연구)

  • Shim, Jong Seok;Han, Duck Jeon
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.15 no.1
    • /
    • pp.95-102
    • /
    • 2011
  • The CFT columns used in thin-walled steel tubes can be more economical, because it was expected the increase of strength by restriction for the local buckling of steel tubes. The purpose of this paper is to review feasibility of existing design formula and verify the applicability limit of width-to-thickness ratio for increasing the strength of rectangular CFT columns. As the main parameters of experiments, width-to-thickness ratios of steel tube, height of rectangular concrete columns, and concrete filled or not. The strength of concrete are selected to 90MPa. From the test results, the confinement effect of steel tube on the compressive strength of infilled concrete is remarkably appeared in the thin-walled rectangular steel tube columns infilled wih high strength concrete. By the non-linear analysis, the axial strength from experiment result was given higher than analysis result for all CFT stub columns.

Prediction of Shoreline and Depth Contour Change after Construction Project for North Breakwater at the Donghae Port by N-line Model (N-Line 모델을 이용한 동해항 3단계 북방파제 축조공사 후 해안선 및 등수심선 변화 예측)

  • Lee, Sahong;Kim, Dong Hee;Lee, Jung Lyul
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.32-32
    • /
    • 2016
  • 정부는 1999년 제정된 연안관리법에 따라 2000년부터 시행 중인 '연안정비계획' 등을 통하여 연안 침식 대응사업을 지원하고 있다. 그러나 연안의 개발은 지속적으로 일어나고 있으며 그 중 동해항 3단계 북방파제 축조공사가 내년 3월 중으로 착공할 것으로 예상된다. 동해항 3단계 개발사업은 동해항을 환동해권 물류 중심 거점 항만으로 육성하기 위해, 오는 2020년까지 대규모 항만개발과 방파제 등이 축조될 예정이다. 이에 따라 본 연구에서는 동해항 3단계 개발사업의 추진에 따른 인근해변의 해안침식 저감대책 방안으로 해안선 및 수심 변화를 예측하고자 한다. 동해항 인근의 추암 해수욕장부터 삼척 해수욕장까지 대상지역 N-line 모델 적용 및 Case분석을 실시한다. 해안선 변화는 Polar coordinate에서 개발된 One-line 모델에 회절 효과를 반영하고 해빈 경사와 쇄파고에 따라 횡단 방향으로 발생하는 표사로 인한 추가적인 해안선 변화 효과를 반영하여 입사파고 변동에 따른 단기적인 해안선 변화의 변동 폭을 제공한다. 연평균 입사 파고에 따라 형성되는 연안방향 표사로부터 해안선이 변동하며 이 해안선을 기준으로 연평균 파고에 따른 전진 폭과 최고 파고에 따른 침식 폭을 제시한다. 동해항 개발 전 변화 예측 모델링과 동해항 개발 후 변화 예측 모델링을 통해 개발에 따른 장래 해안선의 변화 예측 모델링 결과 분석 및 검토를 실시, 동해항 인근 지역에 적합한 해안선 유지관리 방법 결정 및 제안을 하는데 도움을 줄 것이라 기대된다.

  • PDF

Flux correction coefficient in numerical simulation of shallow-water flow over square-edged broad-crested weir (직각 광정 위어를 지나는 천수 흐름 모의에서 흐름률 보정 계수)

  • Seung-Yong Hwang
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.503-503
    • /
    • 2023
  • Hwang(2022; J.KWRA, 55, 10)은 수심 적분 모형으로 불연속 지형을 경사로 완화하지 않고 직접 해석하는 Hwang(2015; J.KSCE, 35, 6)의 기법이 적용된 수치 모형의 정확도를 높이기 위해 지형 전면에 실제로 작용하는 정수압 분포와 차이를 해명하는 흐름률 보정 계수(flux correction coefficient)를 도입하였다. 직각 광정 위어 실험 중에서 널리 알려진 다섯 가지 월류 실험으로부터 218회의 시행을 추려 실험과 모의에서 월류량 값이 서로 잘 일치하는 흐름률 보정 계수를 각각 산정하였는데, 이때 광정 위어를 지나는 흐름을 모의하기 위해 계산 영역을 평면 2차원으로 두고 삼각형 계산 격자로 분할하였다(Hwang, 2022). 실험에 사용된 실험 수로들이 수로의 길이 방향으로 그 폭이 일정하므로 옆벽의 영향이 크지 않다면 수로의 단위 폭에 모형을 적용함으로써 계산 영역의 차원을 한 수준 낮출 수 있다. 실질적으로 1차원 모의가 되어 모의 시간을 획기적으로 줄일 수 있으므로 다양한 분석이 가능하겠으나, 2차원 모의로부터 결정된 흐름률 보정 계수를 수정없이 그대로 적용하는 것이 적절한지 검토할 필요가 있다. 이 연구에서는 Hwang(2022)이 검토한 218회의 직각 광정 위어 실험 시행에 수로의 단위 폭에 불연속 지형을 직접 해석할 수 있는 Hwang(2015)의 1차원 모형을 적용하고 모의와 실험에서 월류량의 차이가 최소가 되는 흐름률 보정 계수를 각각 산정하였다. 결정된 흐름률 보정 계수의 평균값을 별도로 선정된 두 가지 직각 광정 위어 실험에 적용하였으며, 보정에 따른 모형의 성능을 평가하기 위해 Willmott의 일치 지표(index of agreement)를 이용하였다. 흐름률 보정 계수를 적용하였을 때, 한 실험 경우에 대해 모형의 성능이 대폭 개선됨을 확인하였고 성능 개선이 미미한 나머지 실험 경우는 보정 전에 일치 지표가 이미 상당히 높은 편이었다. 2차원 문제에 이어 1차원 모형의 적용에서도 흐름률 보정 계수를 결정함으로써 계단이나 직립 보와 같은 불연속 지형을 넘나드는 천수 흐름의 월류량을 더 쉽고 정확하게 파악할 수 있을 것으로 기대된다.

  • PDF

Suggestion of Synthetic Unit Hydrograph Method Considering Hydrodynamic Characteristic on the Basin (유역의 동수역학적 특성을 고려한 합성단위도 기법의 제시)

  • Kim, Joo Cheol;Choi, Yong Joon;Jeong, Dong Kug
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.31 no.1B
    • /
    • pp.47-55
    • /
    • 2011
  • This study suggests new synthetic unit hydrograph method considering hydrodynamic characteristic on the basin. The suggested method based on width function GIUH, and the procedure is summarized as follows; 1) Draw up a travel distance distribution map (width function) which is raster of length between from center of individual cells to the outlet by GIS. 2) Calculation of travel time distribution map (rescaled width function) by hydrodynamic parameters and travel distance distribution map. 3) Derivation of IUH and Duration UH from rescaled width function. 4) Comparison of shape of UH between suggested method and existing synthetic unit hydrograph methods. The target basins are selected Ipyeong and Tanbu subwatershed in the Bocheong Basin. The target basins are similar scale (watershed area), but different drainage structure (drainage density et al.). Therefore we anticipate that there are different hydrologic response functions because different hydrodynamic characteristics. As a result of derivation of UH, existing synthetic unit hydrograph methods are similar shape of UHs about Ipyeong and Tanbu watersheds, but the suggested method is different shape of ones. As a result of application to observed data, the peak discharge by suggested method is similar to existing synthetic unit hydrograph methods, but the peak time is well correspondence between those. Henceforth, if the suggested method combines with the rational velocity estimation method, it is useful method for synthetic of UH in ungauged watershed.

Effect of Side Openings and Greenhouse Width on the Natural Ventilation Performance (측창 및 온실 폭이 자연환기 성능에 미치는 영향)

  • Hyun Woo Lee;Young Hoe Woo;Jong Won Lee
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.25 no.1
    • /
    • pp.14-19
    • /
    • 2023
  • In summer, the natural ventilation performance for varying greenhouse width is very important in the glasshouses for year round cultivation. The effect of the side openings and greenhouse width on natural ventilation performance was analyzed by simulation. The necessary ventilation rate with different solar radiation transmittance increased significantly when the outside temperature grows higher. The necessary ventilation rate of 40% transmittance was about half of that of 90% transmittance. In consequence, shading effect on temperature control in greenhouse is significant in summer. When the total area of the openings for ventilation is constant, the maximum ventilation rate happens when the area of roof openings is equal to the area of side openings. This maximum ventilation rate is about 3 times of that of the greenhouse with roof openings and without side openings. Therefore, the side openings are advantageous to improve the natural ventilation in greenhouses. As the greenhouse width increases, the influence of side openings on the ventilation rate is becoming smaller. If the natural ventilation rate of the greenhouse with roof and side openings is to become double of that of the roof openings only, the width should be narrower than 38.4m for the Venlo type and 64m for Wide span type.