• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.247-253
• /
• 2012

The purpose of this study was to evaluate the effects of a visual flow speed's modulation-based VR(virtual reality) program on gait function in stroke patients. Thirty one stroke patients were randomly selected at Dep. of Rehabilitation medicine of M hospital in Seoul. We carried out the gait analysis by dividing them with four conditions : one condition had applied without the visual flow modulation-based VR and another had done three visual flow speed's modulation-based VR(0.25, 1, 2 times). The gait analysis was used with GaitRite system. The data were collected using gait velocity, cadence, stride length, step length, single support time, and double support time during treatment. The results were as follows. First, the slow visual flow(0.25 times)-based VR program on the condition was significant decrease gait velocity, cadence, stride length, step length and increase single support time, double support time(p<.05). Second, the fast visual flow(2 times)-based VR program on the condition was significant increase gait velocity, cadence, stride length, step length, single support time on paretic lower limb and decrease single support time on non-paretic lower limb, double support time(p<.05). Third, the normal visual flow(1 times)-based VR program on the condition was not significant differ gait velocity, cadence, stride length, step length, single support time, double support time. In conclusion, the visual flow speed's modulation-based VR program improves gait function in chronic stroke patients.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.608-613
• /
• 2019

NOx (Nitrogen oxide) in the exhaust gas from vehicle engines is considered one of the most harmful substances in air pollution problems. NOx is made when combustion occurs under high temperature conditions and EGR (exhaust gas recirculation) is normally used to lower the combustion temperature. As the EGR ratio increases, the NOx level becomes low, but a high EGR ratio makes the combustion unstable and causes further air pollution problems, such as CO and unburned hydrocarbon level increase. This study showed that fuel droplets could move more freely by the radiation of sonic wave for the stable combustion. In addition, the engine performance improved with increasing EGR ratio. As a basic study, the effect of sonic wave radiation on the velocity of fuel droplets was studied using CFD software. The results showed that the velocity of small droplets increased more under high frequency sonic wave conditions and the velocity of the large droplets increased at low frequency sonic wave conditions. In addition, an engine analysis model was used to study the effects of the increased combustion stability. These results showed that a 15% increase in EGR ratio in combustion resulted in a 45% decrease in NOx and a 10% increase in thermal efficiency.

• The Korean Journal of Quaternary Research
• /
• v.3 no.1
• /
• pp.17-34
• /
• 1989

The distribution characteristics of incised meander river are analysed concerning topography, geology, stream order and altitude. Additionally geomorphological development of the Korean peninsular is considered with incised meander. The main findings are as follows: 1. The incised meander is intensively distributed on the west and north slope of T'aebak and Sobaek mountain range, but sparsely distributed on the opposite slopes. 2. Geologically, the occurrence rate of incised meander is high orderly as follows: Joseon supergroup, Pyeongan supergroup, Daedong supergroup metamorphic rock, Gyeongsang supergroup, and granite. The incised meander is developed well on the following conditions: hard rocks against weathering, stratified structure, geologic arrange across the river channel and contacting zone of geological formations. 3. The higher stream orders are, the higher occurrence of incised meander is. 4. Comparing the altitude of present river bed with the summit level of restored map, it is supposed that the incised meander rivers have been dissected about 300-500m down ward. 5. Considering the distribution characteristic of incised meander, it is suggested that not only T'aebak mountain range but Sobaek mountain range is the axis of asymmetrical up-warping in the Korean peninsular. 6. Considering the distribution characteristic of incised meander on the restored map and the stream order, it seems that present incised meander channel was inherited from antecedent meander river that had flowed on High and Middle level erosion surface. But the channel pattern has been modified.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.5 no.2
• /
• pp.117-122
• /
• 2006

Purpose: The purpose of this study is to investigate the relationship between rotator cuff tear and nerve injury, and prevalence of nerve injury using electromyographic study. Materials and Methods: From May 2004 to Feb. 2005, 19 cases, who underwent surgery for full-thickness rotator cuff tear, were evaluated for nerve injury using electomyogram instruments preoperatively. Rotator cuff tears caused by acute high energy trauma were excluded in this study. Mean age was 59 (range, 45-87) years and mean duration of symptoms was 45 (range, 1-360) month. Results: There were six nerve injuries (31.6%). All of them were incomplete brachial plexus injuries, and mainly postganglionic lesions. Four cases among them had minor trauma history. There were no significant differences in terms of cuff tear size, range of motion, pain score and functional score between groups with and without nerve injury. Conclusion: This study showed high prevalence (31.6%) of nerve injury in full-thickness rotator cuff tear. So careful physical examination and evaluation for nerve injury are needed in rotator cuff tear.

• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.94-98
• /
• 2011

Purpose: We present a case of anterior glenoid rim comminuted fracture that was treated with arthroscopic reduction and an AO headless compression screw (HCS) fixation. Materials and Methods: A 31-year old man complained of left shoulder pain after falling down on stairs. The anterior glenoid comminuted fragments were arthroscopically reduced. Fixation with an AO HCS was done after placement of 1.1 mm Kirschner wire as a guide pin through a standard cannulated anterosuperior portal. Results: Twelve months after the operation, union of the fracture was achieved and the range of motion was fully recovered. He did not complain of any discomfort during his activities of daily living. Conclusion: An AO HCS had various screw sizes and this was good for fixation of a small glenoid fracture and a long drill bit and screw driver were useful for fixation of deep seated glenoid fracture. A short guide wire could be replaced by a 1.1 mm K-wire. An AO HCS was useful for fixation of an anterior glenoid rim comminuted fracture.

• The Korean Journal of Nuclear Medicine
• /
• v.31 no.1
• /
• pp.1-8
• /
• 1997

뇌성마비는 뇌 발달시기중 초기의 장애로 인하여 운동기능과 자세의 이상 등을 초래하는 질환으로 임상적으로 여러 유형으로 나누어진다. 뇌성마비 환자중에서 MRI 상 롤란도야의 이상소견을 보이는 경우 특이한 임상적 특징을 나타낸다고 보고되어있다. 본 논문에서는 이들을 대상으로 하여 뇌 단일광자컴퓨터촬영에서 나타나는 뇌혈류 이상 소견과 MRI 소견, 그리고 임상양상들을 비교해보고자 하였다. 임상적으로 뇌성마비로 진단된 80여명의 환자중 MRI상 롤란도야에 저산소성 뇌질환의 소견을 보인 7명을 대상으로 하였다. 이들에게 5-10mCi의 Tc-99m-ECD를 정맥주사후 뇌 단일광자컴퓨터촬영을 하였다. 뇌 단일광자컴퓨터촬영상에서는 특히 뇌피질, 선조체, 시상, 뇌간 및 소뇌의 혈류이상 소견을 분석하였고, 이를 MRI 소견 및 임상증상과 비교하였다. 모든 환자들은 만삭 또는 만삭에 가깝게 태어났고, 주산기 아사가 여섯명의 환자에서 있었다. 임상적으로는 긴장성 사지마비로 나타났다. Tc-99m ECD를 이용한 뇌 단일광자 컴퓨터촬영상 롤란도야의 혈류감소는 모두에서 확연하게 나타났다 MRI상에서 롤란도야의 이상소견은 5명에서는 확실하게 나타났고, 2명에서는 의심되었다. MRI상에서 이상소견을 보인 것보다 더 광범위한 부분에서 뇌단일광자컴퓨터촬영상 이상소견이 보였다. 결론적으로, 롤란도야에서 이상소견을 보인 환자는 임상적, 구조적, 그리고 기능적으로 특이한 소견을 보였다. Tc-99m-ECD를 이용한 뇌 단일광자컴퓨터촬영은 매우 민감하게 반영하였고, MRI보다 뇌의 더 광범위한 부위에서 이상소견을 보였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.31-41
• /
• 1997

This paper describes a potential-based panel method formulated for the prediction of the steady performance of a waterjet propulsor. The method employs normal dipoles and sources distributed on the solid surfaces such as the impeller/stator blades, hub and duct, and normal dipoles in the shed wakes trailing the impeller and stator to represent the potential flow around the waterjet propulsor. To define a closed boundary surface, the inlet and outlet open boundary surfaces are introduced where the sources and dipoles are distributed. The kinematic boundary condition on the solid boundary surface is satisfied by requiring that the normal component of the total velocity should vanish. On the inlet surface, the total inflow flux into the duct is specified, and on the outlet surface the conservation of mass principle is applied to evaluate the source strength. The solid surfaces are discretized into a set of quadrilateral panel elements and the strengths of sources and dipoles are assumed constant at each panel. Applying this approximation to the boundary conditions leads to a set of simultaneous equations. Systematic numerical tests show that the present numerical method is fast and stable. In order to validate the present method, sample computations are carried out first for the case of a conventional axial flow fan which has a similar geometry as the waterjet propulsor, and then for the case of a waterjet propulsor on which experiments are carried out at KRISO(Korea Research Institute of Ships and Ocean Engineering).

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.361-368
• /
• 2016

As the tertiary industry is being developed, many problems are introduced in an industrial area in Korea. This study aims to investigate the residents' health conditions, such as the prevalence of metabolic syndrome and fatty liver diagnosed by ultrasonography, comparing the urban with the industrial areas. The subjects were 378 adults in the urban area and 376 adults in the industrial area. Subject variables accounted for were gender, age, drinking habits, smoking habits, physical activities, waist circumferences and BMI. In blood tests, fasting blood glucose, triglyceride, HDL, blood pressures, total cholesterol, AST, ALT and GGT were examined. Also, the presence and absence of fatty liver, diagnosed using ultrasonography, was investigated. As a result, the prevalence of metabolic syndrome were 43.7% in the urban area and 51.6% in the industrial area, hence it was significantly higher in the industrial area than in the urban area. Fasting blood glucose, triglyceride and waist circumference in the distribution of the individual components were 47.4, 53.7, and 16.1% in the urban area and 54.5, 61.5, and 22.9% in the industrial area respectively, so it was substantially higher in the industrial area than in the urban area. On the other hand, HDL, diastolic blood pressure, and fatty liver were 25.7, 43.4, and 44.7% in the urban area and 21.3, 19.9, and 36.7% in the industrial area respectively and thus it was much higher in the urban area than in the industrial area. In conclusion, this study shows that there were significant differences between the residents' health condition, comparing the urban area to the industrial area. Therefore, the precaution and aggressive management of metabolic syndrome may be necessary, in accordance with the characteristics of the industrial zone.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1731-1736
• /
• 2007

본 연구에서는 체가름 시험을 통해 얻은 대표입경으로 조도계수를 산정하고 그 산정된 조도계수의 효용을 검정하고자 하였다. 체가름 분석을 통해 입도곡선을 작성하고 대표입경을 구함으로서 기 수립된 공식에 의한 조도계수를 산정하였다. 산정된 조도계수는 HEC-HMS의 하도추적 방법 중에 하나인 Muskingum-Cunge 8 point 방법과 HEC-RAS의 부정류 해석을 이용한 방법으로 얻은 조도계수를 비교하였다. HEC-HMS의 경우 대상유역인 오산천 유역에 대해 선행연구과정으로 저수지 방류량을 고려한 강우-유출 모형의 매개변수 추정에 관한 연구가 이뤄졌다(2006, 이아름). 선행연구에서는 계산된 유량과 실측 유량을 비교하여 Clark 단위도 방법의 매개변수를 추정하여 그 중 빈도가 큰 유출사상의 경우에 Sabol 식에 의한 모의 결과가 첨두유량의 재현성이 우수하게 나타남을 확인했다. 따라서 HEC-HMS 모형은 Clark 단위도 방법의 매개변수는 Sabol의 식에 의해 모형을 구성하고 2001년, 2002년, 2004년, 2005년의 사상에 대해 강우량, 기흥 저수지와 이동저수지의 실제 방류량을 이용해 유출량을 산정하였다. 이중 오산천 유역에 대해 선행연구에서 사용된 Muskingum의 하도추적 방법은 Muskingum-Cunge 8 point 방법으로 변경하여 대상유역에서의 조도계수를 산정하였다. HEC-RAS 모형의 부정류 해석은 2002년과 2005년의 사상으로서 상류단 경계조건으로 기흥 저수지의 방류량을 유량수문곡선으로 이용하였고, 하류단 경계조건으로는 회화수위관측소의 수위수문곡선을 이용했다. 대표입경을 이용해 얻은 조도계수를 HEC-HMS, HEC-RAS를 통해 검정한 결과 실측된 유량과 수위를 비교적 잘 재현해 내는 것으로 나타났으나, 조도계수의 보정을 통한 재현 유량과 수위를 비교했을 때, 대표입경을 통해 얻은 조도계수가 보정 조도계수보다 다소 작은 것으로 해석되었다.하고자 한다.해결책을 얻어내는 상호보완적인 결과를 추구한다. 그가 디자인하는 작품은 전형적인 이미지를 내포하지 않는다. 즉 그의 작품은 기존의 가치와 이념적인 것은 배제하고, 창의적인 개념을 도출하였다.형모서리는 건물 특화 성격이 강하므로 불가피할 경우 소형 액센트 광고 위치를 미리 벽면으로 할애하는 것이 경관 및 입면계획에 유리한 것으로 분석되었다. 불확실도 해석모형 등의 새로운 기능을 추가하여 제시하였다. 모든 입출력자료는 프로젝트 단위별로 운영되어 data의 관리가 손쉽도록 하였으며 결과를 DB에 저장하여 다른 모형에서도 적용할 수 있도록 하였다. 그리고 HyGIS-HMS 및 HyGIS-RAS 모형에서 강우-유출-하도 수리해석-범람해석 등이 일괄되게 하나의 시스템 내에서 구현될 수 있도록 하였다. 따라서 HyGIS와 통합된 수리, 수문모형은 국내 하천 및 유역에 적합한 시스템으로서 향후 HydroInformatics 구현을 염두에 둔 특화된 국내 수자원 분야 소프트웨어의 개발에 기본 토대를 제공할 것으로 판단된다.았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는 효과를 발휘하는 것이 아닌가 해석된다. 이와 같은 연구결과를 통해 생다시마를 주원료로 개발된 생다시마차와 생다시마 음료가 만성 기능성 변비 증세를 개선하는 효능이 잠재적으로 있음을 확인하였다. 그러나 생약제재의 변비약 수준으로 변비 개선 효능을 증대하기 위해서는 재료 배합비의 개선이나 대장 운동기능을 향상시키는 유효성분의 보강 등이 필요하다는 점도 알 수 있었다.더불어

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.84-91
• /
• 2005

For long time, the takeoff and landing control of airship was worked by human handling. With the development of the autonomous control system, the exact controls during the takeoff and landing were required and lots of methods and algorithms were suggested. This paper presents the result of airship take-off and landing by buoyancy control using air ballonet volume change and performance control of pitch angle for stable flight within the desired altitude. For the complexity of airship's dynamics, firstly, simple PID controller was applied. Due to the various atmospheric conditions, this controller didn't give satisfactory results. Therefore, new control method was designed to reduce rapidly the error between designed trajectory and actual trajectory by learning algorithm using an artificial neural network. Generally, ANN has various weaknesses such as large training time, selection of neuron and hidden layer numbers required to deal with complex problem. To overcome these drawbacks, in this paper, the RBFN (radial basis function network) controller developed. The weight value of RBFN is acquired by learning which to reduce the error between desired input output through and airship dynamics to impress the disturbance. As a result of simulation, the controller using the RBFN is superior to PID controller which maximum error is 15M.