• Journal of the Korean Magnetics Society
• /
• v.5 no.3
• /
• pp.197-202
• /
• 1995

고주파용 전원의 필요성이 대두되면서 고주파에서 낮은 자기손실을 가진 재료의 개발이 요구되고 있다. Mn-Zn 페라이트의 자기손실은 전기비저항의 증거나 소결시 미세구조의 제어로 줄일 수 있다. 본 연구에서는 연쇄고온합성법(Self-propagation High- temperature Synthesis)에 의해 제조된 $_Mn_{0.72}$Z $n_{0.22}$)$_{0.94}$ (F $e_{2}$ $O_{3}$)$_{1.06}$ 조성의 Mn-Zn페라이트에서 첨가물이 미세구조와 자기적 성질에 미치는 영향에 대해 조사하였다. $SiO_{2}$와 Ca $Co_{3}$의 복합첨가에 의해 미세구조의 미세화와 아울러 낮은 자기손실 특성을 얻을 수 있었다. 그러나 첨가 물의 과다 첨가시에는 비정상입자성장 조직이 나타났으며 자기적 성질이 현저히 저하 하였다. 전기비저항, 자기손실의 주파수 의존 결과에 근거하여 주된 자기손실기구 및 이에 미치는 첨가물 효과에 대해 논하였다.

• Journal of Plant Biology
• /
• v.27 no.1
• /
• pp.1-6
• /
• 1984

Kinetin(4.7$\times$10\ulcornerM) and 6-benzylaminopurine (2.2$\times$10\ulcornerM) were found to increase ca. 1.5-fold putrescice content in corn grown in medium containing kinetin and 6-benzylaminopurine(6-BAP) for 3days whereas kinetin was found to decrase ca. 30% spermidine and spermine, respectively. KCI (3$\times$10\ulcornerM) was found to decrease more than 50% putrescine content. After germination, ornithine decarboxylase activity was observed to increase constantly whereas arginine decarboxylase activity remained constant, suggesting involvement in putrescine biosynthesis. 6-benzylaminopurine was shown to increase more activities of arginine ornithine decarboxylase than kinetin when they were added to medium.

• Journal of the Korean Ceramic Society
• /
• v.37 no.4
• /
• pp.332-337
• /
• 2000

Forming mechanism of fibrous TiC during self-propagating high temperature synthetic reaction was analyzed and suggested. It was revealed that critical temperature for the stable fiber formation was not the melting point of TiC, but the eutectic reaction temperature of TiC and C. Minimum amount of TiC diluent addition required to form fibers was calculated to be 25.6%, which was consistent with the experimental result. Synthesized fibers were found hollow tube-like. The morphology was explained by the diffusion rates of C and Ti in TiC, and by the molar volume chnage of C during the reaction. Expanding shell model was suggested for the hollow fiber formation mechanism.

• Journal of the Korean Ceramic Society
• /
• v.26 no.3
• /
• pp.371-380
• /
• 1989

The purpose of this experiment is to elucidate the reaction mechanism concerning to the formation of crystalline BaTiO3 synthesized by adding the pH control agent(KOH soln) in TiCl4 and BaCl2 solution (Wet direct synthetic method). In this expeirment, it is identified that the amorphous barium-titanate having Ba-O-Ti bonding is formed above pH5 due to the -OH- ion and Ti-gel is formed below pH5 due to the polymerization of metatitanic acid. The bonding of the amorphous Ba-O-Ti is identified by FT-IR spectrum and crystallization temperature is about 82$0^{\circ}C$. If the pH of the above system according to the -OH- ion concentration is above 13.8, the polymerized metatitanic acid will be depolymerized and produce [TiO3]2+ion and crystalline BaTiO3 is formed by reacting the produced [TiO3]-- ion with the active Ba++ ion.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.11a
• /
• pp.186-189
• /
• 2013

최근 다양한 3D 콘텐츠들에 대한 사용자의 요구에 따라 HD(High Definition)화질 및 이를 넘어서는 고해상도(FHD(full high definition), UHD(ultra high definition))의 고품질 3D 방송 서비스에 대한 연구가 진행되고 있으며, 차세대 영상 기술로 주목되고 있는 3차원 비디오 기술은 사용자에게 실감 있는 영상을 제공할 수 있다, 하지만 많은 시점을 전부 촬영하는 것은 한계가 있으므로, 카메라의 깊이 정보를 이용하여, 전송하는 시점을 줄이고, 시점영상을 합성함으로써 사용하는 카메라의 수보다 더 많은 시점을 생성하는 방법이 필요하다. 현재 국제 표준화 기구인 MPEG(Moving Picture Experts Group)의 3차원 비디오 부호화(3D Video Coding, 3DVC)에서는 깊이영상을 가지는 3차원 비디오영상에 대한 효과적인 부호화 기술들에 대해 표준화가 진행되고 있다. 이에 본 논문은 HEVC 기반의 3D-HEVC에서 사용하는 표준 기술들에 대하여 소개하고, 현재 사용되고 있는 기술들에 대한 성능 평가를 분석 하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.33-34
• /
• 2007

DLC를 포함한 탄소 박막은 우수한 특성으로 인해 세계적으로 많은 연구들이 진행 되고 있다. 본 연구에서는 탄소 박막의 산소 및 수분 차단 특성 및 광투과율의 특성과 플라즈마 변수와의 상관관계를 규명 하고자 하였으며, 이러한 상관관계를 Langmuir probe, UV-spectroscopy, MOCON 의 분석기구를 통하여 플라즈마 변수와 박막의 특성을 분석 하였으며, 수분 투과도는 4g/m$^2$/day까지 감소하는 결과를 얻었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04a
• /
• pp.525-530
• /
• 1995

The main objective of this study is to develop a gripper mechanism that can be employed for assembly and removal tasks of a nozzle-dam of steam gererator which is one of the nuclear reactor maintenance process. Brief description of the open-close type gripper mechanism, its postion analysis, and its kinematic amalysis are given. The optimal design of the gripper mechanism with slipping on its two gripping surfaces is considered. As an optimaldesign index, the ratio of the actuator force of prismatic cylinder to gripping load is proposed. Then, based on this index the optimal design synthesis is careied out to identify values of optimal design parameters for the gripper mechanism.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.51-59
• /
• 1993

This paper develops practical and realistic reliability models and methods for the evaluation of system-reliability and system reliability-based rating of various types of box-girder bridge superstructures. The strength limit state model for box-girder bridges suggested in the paper are based on not only the basic flexural strength but also the strength interaction equations which simultaneously take into account flexure, shear and torsion. And the system reliability problem of box-girder superstructure is formulated as parallel-series models obtained from the FMA(Failure Mode Approach) based on major failure mechanisms or critical failure states of each girder. In the paper, an improved IST(Importance Sampling Technique) simulation algorithm is used for the system reliability analysis of the proposed models. This paper proposes a practical but rational approach for the evaluation of capacity rating in terms of the equivalent system-capacity rating corresponding to the estimated system-reliability index which is derived based on the concept of the equivalent FOSM(First Order Second Moment) form of system reliability index. The results of the reliability evaluation and rating of existing bridges indicate that the reserved reliability and capacity rating at system level are significantly different from those of element reliability or conventional methods especially in the case of highly redundant box-girder bridges.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.2
• /
• pp.179-188
• /
• 2011

Experiments were conducted in a constant-pressure combustion chamber to investigate the effects of hydrocarbon addition on cellular instabilities of syngas-air flames. The measured laminar burning velocities were compared with the predicted results computed using reliable kinetic mechanisms with detailed transport and chemistry. The cellular instabilities that included hydrodynamic and diffusional-thermal instabilities of the hydrocarbon-added syngas-air flames were identified and evaluated. Further, experimentally measured critical Peclet numbers for fuel-lean flames were compared with the predicted results. Experimental results showed that the laminar burning velocities decreased significantly with an increase in the amount of hydrocarbon added in the reactant mixtures. With addition of propane and butane, the propensity for cell formation was significantly diminished whereas the cellular instabilities for methane-added syngas-air flames were not suppressed.

• Korean Journal of Human Ecology
• /
• v.19 no.1
• /
• pp.167-177
• /
• 2010

This study examined consumer perception and use on labeling of cooking utensils made of plastic and glass to get information about improving the labeling. The data were collected from 505 adults in Seoul, Busan, Daegu, Daejeon, Incheon, and Gwangju. The data were analyzed by SPSS Windows V.14.0. Frequencies, t tests, one-way analysis of variance, and Duncan's multiple range tests were carried out. Many respondents checked off 'precautions in use' more than any other notice when they purchased the cooking utensils made of plastic and glass. Respondents were dissatisfied with the letter size and intelligibility of foreign language on the labeling. Most respondents preferred 'tag' for most cooking utensils made of plastic and glass. In addition, on necessity of precautions for each category of plastic cooking utensils, frying pans, plastic baskets, plastic water buckets, plastic seasoning bottles, the frying pan showed the highest need for 'do not place close to the fire'. Plastic cups and plastic containers showed the highest in 'whether utensils could be used in the microwave oven and accompanying precautions', and plastic cutting board showed the highest in 'matters relating to washing before use.' In the case of cooking utensils made of glass, 'precaution on shock' was the highest for glass cups and mugs and 'whether utensils could be used in the microwave oven and accompanying precautions' was the highest for glass pans, dishes and containers.