• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.3
• /
• pp.98-103
• /
• 2004

Diesel engine offers superior fuel consumption than gasoline engine of equivalent capacity. For this reason, diesel engines are widely used in heavy duty transport applications. Specially, it has been many years that exhaust gases from gasoline automobile rather than from diesel is the major object concerned by Korea and other countries, and it is strongly required on the reduction techniques on harmful NOx, Soot, CO, He. Thus, this paper focused on the emission reduction and target for this paper is heavy-duty diesel engine equipped with power filter such as wet type air cleaner. In this paper, the performance, exhaust emissions(CO, THC, NOx, Soot) and noise of heavy-duty diesel engine were measured at maximum load condition and the range of 1,000∼2,200rpm. The smoke was measured at FAS(Free Accel Smoke) test mode.

• Journal of the Korean Institute of Gas
• /
• v.4 no.2 s.10
• /
• pp.20-26
• /
• 2000

In this experimental study, we examined gas engine characteristics of a small high-speed engine in various ways. And we studied performance of natural gas, hydrogen gas and gasoline fuel engines, as emission characteristics and process of combustion. For the purpose of preventing back-fire occurred in case of high-speed and high load in hydrogen engine, we controlled air quantity by installing throttle valve in gas fuel engine. We performed experiment by mixing nitrogen to hydrogen fuel. As a result, we could find out characteristics which of a high speed small engine by applying gas fuels.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.5
• /
• pp.66-72
• /
• 1999

It is necessary to discuss lightening engine parts and reducing the friction of sliding parts to improve fuel consumption and combustion stability at idling condition. Lean best torque combustion which produce maximum power at a lean air-fuel ratio is effective for the reduction of exhaust gas emission and the improvement of fuel consumption. Accordingly, this study deals with the expansion of lean combustible limitation, the combustion stability and the reduction of idle speed through the analysis of combustion characteristics on the base of the control technique of precise air-fuel ratio because it does not need to maximum power at idling condition. The idle speed is increased proportional to ISC(Idle Speed Control) duty ratio. On the other hand the idle speed decreased by lean air-fuel ratio. The COV in engine speed is stable within maximum two percent up to 17.6 mixture ratio by the control of ISC duty ratio.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.8
• /
• pp.713-721
• /
• 2014

In Europe and USA, new programs called GRC(Green Rotorcraft) and SRW (Subsonic Rotary Wing program) respectively, have been currently underway for developing the next generation rotorcraft. The final goal is to develope fuel-efficient/environmental-friendly tilt-rotor civilian rotorcraft, which can partly replace short-range regional aircrafts. Also for safe operation, the new rotorcraft technology is cooperated with the new air transport management(ATM) system, called SESAR(Single European Sky ATM Research) and NextGen(Next Generation Air Transport System) in Europe and USA. In addition to achieve the final goal, the tilt-rotor aircraft, they are trying to improve the performance of conventional helicopters by adopting more efficient propulsion system, active rotor system, and reducing internal and external noise. Especially in GRC program of Europe, the environmental factors such as noise, fuel efficiency, reduction of emission gas(CO2, NOx), are focused for the new technologies.

• Journal of Internet Computing and Services
• /
• v.17 no.3
• /
• pp.33-43
• /
• 2016

In this study, 3D-image based course material has been suggested as a potential pedagogical tool for laboratory courses for aviational maintenance in vocational high schools. With a special focus on assembly/disassembly of the combustion chamber, 3D contents described here are created by Soildworks 2014 based on the textbook widely used in aviational high schools. By analyzing several textbooks currently adopted at various schools, we have clearly shown that the current text-based teaching method is far from being effective regarding providing adequate learning environment for high school students who study aviational maintenance. From the analysis of the conventional textbooks, it is seen that it is urgent that we should come up with more effective and efficient way of teaching methods for these topics at vocational high schools. Using Solidworks, we have developed very vivid 3D image-based course material for topics related to a combustion chamber in the airplane. Newly developed 3D material is seen to clearly show step by step procedures of assembly and disassembly of the combustion chamber which has crucial importance in the aviational laboratory courses. Especially the transparent feature in Solidworks could make it possible to observe the parts covered by outer casing, which can not be seen even in any laboratory class with real objects. 3D animated views could provided unprecedented learning environment for students to acquire core knowledge with ease for the maintenance of a combustion chamber. In order to provide easy access for students to this 3D-based course material, the exclusive viewer is also developed using MS office powerpoint 2007. An example of a learning plan using 3d course material is suggested as well.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.39-43
• /
• 1995

대형 상용차용 내연기관에서 방출되는 소음의 음압 레벨은 경우에 따라 140dBA 이상으로 환경소음 배출규제에 부합되는 배출 소음을 위하여는 소음기의 적절한 설계가 필요하다 하겠다. 소음기는 방출 소음을 저감시키는 기본적인 작용 이외에 엔진의 효율을 저하시키는 배압(back-pressure) 상승의 효과를 동반할 뿐만 아니라 차체에의 장착을 위하여 크기와 무게의 제약을 받는다. 따라서 소음기는 설계자의 경험과 과거에 사용되어 온 소음기에 대한 이해, 소음기를 구성하는 단위 요소에 대한 음향학적 해석이론, 제작 과정에서의 경험과 튜닝 등에 바탕을 두고 설계되어져 왔다. 본 연구에서는 대형 상용차에 장착되는 기존 소음기 구성요소의 투과 손실(Transmission Loss: TL)을 전달 행렬법으로 해석하여 음향학적 특성을 규명하고 개별 소음기 요소에 대한 기존의 연구 결과를 바탕으로 공명기와 다공 요소를 이용하여 기존 소음기를 재설계함으로써 배출 소음의 저감을 이루어 나간 과정을 소개하고 이를 적용 사례를 중심으로 살펴보고 있다. 소음기의 설계를 위하여 고려할 수 있는 음향학적 요소는 그 기능과 형태면에서 다양하나 본 연구에서는 대형 상용차용 소음기에 주로 사용 가능한 공명기와 다공관을 주된 설계요소로 생각하였다. 공명기는 공명 주파수 대역의 소음을 저감하는 역할을 하므로 일정한 엔진 회전수 하에서 엔진의 방출 소음중 폭발 성분에 의한 소음을 줄이는데 효과적으로 사용될 수 있지만 가속 주행시에는 회전수(rpm)의 변화에 따라 폭발 주기가 변화하게 되므로 공명기의 설계에 주의를 기울여야 한다. 내연 기관용 소음기에 빈번하게 쓰이는 다공 요소의 해석 방법으로는 Sullivan[1], Kim and Yoon[2] 등의 분할 접근 방법(Segmentation approach)과 Jayaraman and Yam[3], Munjal[4], Peat[5] 등의 연성 제거 방법(Decoupling Approach)등이 제시되었고 평면파 영역에 한하여 해서되어져 왔다. 본 논문에서는 분할 접근 방법(Segmentation Approach)을 이용하여 다공 요소로 이루어진 소음기를 해석하는데 적용하였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.3
• /
• pp.150-156
• /
• 1975

This paper dealt itself with the relation of the heat release rate with crank angle in combustion process by adjusting the injection time, injection amount and engine speed of diesel engine. The result of test were obtained by analyzing indicator diagram of KUBOTA 2LKE diesel engine, where the indicator was used Tertronix oscilloscope. The combustion period of diesel engine is composed of premixed burning time and combustion controlled time. The larger the premixed burning region, the higher efficiency was obtained with the higher maximum pressure than at the time of the normal smooth operation. The longer the combustion controlled time, the lower the maximum pressure than the period of the normal operation, but the efficiency was decreased. The region of premixed burning was principally controlled by injection delay, but combustion controlled time was affected when oxygen and fuel were mixed. Efficiency of engine was increased at the time of earlier injection time under the constant injection amount, and engine speed, but the pressure increasing was observed higher than the efficiency increasing.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.67-68
• /
• 2001

멸치를 어획하는 주 어구인 초망어업은 우리나라 남해안과 제주도 연안에서 행해지는 고유어법으로서, 이러한 초망어업은 큰 챗대 1개와 작은 챗대 1개는 반 기계적으로, 콧대 1개와 그물작업은 인력으로 조작되고 있는데, 멸치어군의 집어는 집어등을 선수 전방에 설치하여 2-3노트의 속력으로 항해하면서 멸치어군을 표층으로 부상시킨다. 이때 집어등만으로 멸치어군이 표층으로 부상하지 않으면 쇠파이프로 어선의 외관을 두드리거나 또는 기관 회전수를 빠르게 하여 공회전 시키면서 수중 소음을 발생시켜 멸치어군을 표층으로 유집시킨다. (중략)

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.3
• /
• pp.20-28
• /
• 2007

The easiest way to see the phenomena of compressor surge is to show the static and dynamic operation characteristic on the map. Its operation zone will be restricted by the surge limit and, static and transient process must have some margin for it. Effect of rotor moment of inertia, air/gas volumes and heat transfer are factors to cause the transition from the static line. In case a large volume such as heat exchanger exists in the system it will exert a substantial influence to dynamic characteristics. In the present paper, influence of air volume bled from the compressor exit on transient process is investigated with an example of an auxiliary power unit micro-turbine engine. Turbine mass, pressure ratio, rotation speed, power and moment are calculated based on mass and work conservation. Result from the present study can give guidance to design the control system. A computer program is developed to calculate the dynamic process using the MathCAD commercial software.

• Journal of the Korean Geographical Society
• /
• v.44 no.4
• /
• pp.532-543
• /
• 2009

The foodservice franchise is preferred by the founders who inaugurate a business enterprise, because it is not difficult to convert into money more than other private enterprise. The success or failure of the foodservice franchise depends 80 percent on its location. Therefore, this research aimed to study the location factors of the first shops of foodservice franchise in Seoul through the analyses of nearest neighborhood effect and statistical relationship between variables. According to there results, the location characteristics of the first shops of foodservice franchise are summarized as in the following three items. First, the spatial distribution pattern of the first shops is a clustered type. Second, the first shops relate to the 15 variables which are the number of financial facilities, the number of business service offices, and the number of hotels and restaurants, etc. Third, the main location factor of the first shops is the number of financial facilities. In conclusion, it is estimated that Gangnam-gu and Jung-gu might be good for the location of the first shops of foodservice franchise in Seoul, because these two places have many financial buildings.