• Composites Research
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2012

In order to predict the thermoelastic behavior of porous composites, poroelastic parameters are measured by using micromechanics-based finite element models. The expanding deformation caused by pore pressure, and the degradation of homogenized elastic moduli with pores are calculated for the assessment of the poroelastic parameters. Various representative volume elements considering the shape, size, and array pattern of pores are modeled and analyzed by a finite element method. The effects of porosity and material anisotropy, and the distribution of stain energy density are investigated carefully. In addition, the measured poroelastic parameters are verified by predicting the thermo-pore-elastic behavior of carbon/phenolic composites.

• Journal of Korean Society of Forest Science
• /
• v.76 no.1
• /
• pp.27-32
• /
• 1987

Stomatal morphological characteristics (shape, density and length) were investigated for 8 ornamental woody species growing in the campus of Sangji College on Usandong, Wonju, Kangwondo. Stomata of Forsythia koreana, Syringa dialata, Zedkova serrata and Chaenomeles sinensis were classified as irregular-celled type (anomocytic), those of Vibrunum sargentii, Liriodendron tulipifera and Magnolia kobus as parallel-celled type (paracytic). For Forsythia koreana, stomatal length was not greatly changed as the leaf blade, growing larger. Number of stomata per unit leaf area was decreased, but number of stomata per single leaf was increased as the leaf blade, growing larger. For Taxus cuspidata, stomatal length was increased, but number of stomata per unit needle area was decreased as the needle, growing larger.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.23-23
• /
• 2003

분말야금된 소결체의 가장 큰 특징 중의 하나는 피할 수 없는 소결체의 기공이다. 이러한 기공이 기계적 특성에 미치는 영향에 관해서는 많은 연구가 오래 전부터 진행되었었다. 그러나 기존의 연구는 거의 대부분 일반 분말야금에 의한 것이고 분말사출성형된 소결체의 기공율과 기계적 특성 광계는 거의 연구가 이루어 지지 않았다. 본 연구에서는 기공율의 조절이 용이한 분말사출성형 공정을 이용하여 소결 초기부터 완전 치밀화에 가까운 조직까지 다양한 소경율의 시편을 만들어 기계적 특성에 미치는 순수기공의 영향은 조사하기 위해 다음과 같이 조사하고자 하였다. 사출성형에 사용된 재료는 고강도 이며 내식성이 뛰어난 17-4 PH STS이고 평균 입경은 10mm였다. 열분해와 소결은 수소 분위기에서 행하였으며 소결온도는 900~$1350^{\circ}C$였다. 연구수행을 통해 다음과 같은 결론을 얻었다. 1. 기공율과 기계적 특성의 관계는 닫힌 기공이 지배하는 고밀도 영역과 열린 기공이 지배하는 저밀도 영역을 분리하여 해석해야한다. 2. 저밀도 영역에서의 기공율과 강도의 관계는 넥 성장에 따른 load bearing area의 증가로 나타낼 수 있고 아래와 같다. $\frac{\delta}{\delta_o}=1-\frac{P}{P_i}$ 3. 고밀도 영역에서의 기공율과 강도의 관계는 소결 현상과 초기 충진율을 고려한 ideal pore모델을 도입하였고 아래와 같이 나타났다. $\frac{\delta}{\delta_o}=1-1.95(P_i\;{\cdot}\;P)^{2/3}$

• Composites Research
• /
• v.17 no.2
• /
• pp.34-39
• /
• 2004

In this paper, a modified and representative unit cell model was employed to study the tensile behaviour of closed-cell metallic foams with varying spatial density distribution as well as material imperfections. The density variation was assumed to follow a statistical probability distribution of the Gaussian type. A multiple cell finite element model, utilising the modified unit cell, was developed. The model exhibits deformation patterns similar to those observed in tensile testing. The nominal stress-strain curve obtained from quasistatic tensile of the foam was compared with experimental findings and was found to be in good agreement in the scheme of maximum strength only if the appropriate density distribution and volume fraction of internal imperfections are taken into account. Moreover, maximum tensile strength of the aluminium foam was found to be more sensitive to the volume fraction of imperfection than standard deviation of the density.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.919-927
• /
• 2002

In order to fabricate double-layered porous materials powders of different particle sizes were pressed stepwise. Ford＇s equation which predicts the fired density with the change in pressed density was employed in order to adjust the difference in sintering shrinkage of the green body with double-layered porous structure. Double-layered porous materials were characterized by investigating microstructures and permeability. SEM micrographs showed the distinct difference in pore sizes of double-layered porous material. Permeability of single-layered porous material increased by increasing the starting particle sizes and porosity as well. Permeability of the double-layered porous material depends largely on the layer of small pore diameter.

• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.82-94
• /
• 1984

The variation of stomatal density and stomatal length of four species of oaks was studied for the purpose of examining the differences among populations and among individual trees within population. Nine populations of Quercus mongolica, four populations of Q. serrata and Q. variabilis respectively, and three populations of Q. acutissima were selected in the natural stands of oaks distributed through the whole country. Twelve leaves were sampled from each of 20 trees from each population. The length of 20 stomata and ten replications of stomatal density were measured from collodion replicas of each leaf under a microscope. Average stomatal densities and lengths ranged through $600-1000/mm^2$ and $19-26{\mu}m$ respectively in all of the species studied. The stomatal densities and lengths presented significant differences statistically at the level of 1 or 5% among populations and among individual trees within population in all the species. Quercus mongolica, especially, showed large variation among populations, while Q. variabilis did very narrow variation compared to the other species. The coefficients of variation of stomatal densities and lengths among individual trees within population exhibited small values of 3.7-12.0% and 1.4-5.3% respectively in all the populations of the species. The average stomatal densities of Q. mongolica showed statistically significant correlation of multiple correlation coefficient of $R_{df{\cdot}2.6}=0.868^*$ and multiple regression equation of $Y=0.041X_1(G.M.T.S.)+0.489X_2(G.M.H.S.)+22.37$ with the sum of growing season mean daily temperature and the sum of growing season mean daily humidity of the stand studied. However the average stomatal lengths showed no relation with the same meteological variables. The figures of frequency distribution of the measurements of leaves or the mean values of individual trees did not show normal distribution curves in some populations. The curves, as well as the results of ANOVA, exhibited the differences among populations.

• Korean Journal of Weed Science
• /
• v.9 no.1
• /
• pp.46-55
• /
• 1989

Stomatal variation was observed at the Yeongnam Crop Experiment Station in 1988 using 42 rice cultivars and 30 weed species. The shape, density or size of stomata was varied depending on the species. Two general trends, however, were found that more number of stomata was found at lower leaf epidermis than upper leaf epidermis and stomata number was negatively correlated with stomata size. Aneilema japonica and Portulaca oleracea had the least number of stomata having 17-20 stomata per $m^2$ for upper leaf epidermis and 17-54 stomata for lower leaf epidermis while Polygonum conspicuum had the greatest number of stomata (449 for upper leaf epidermis and 511 for lower leaf epidermis). Soybean, Aeschynomene indica, Ludwigia prostrata and Lactuca indica had the smallest in stomata size while the biggest stomata was found at P. oleracea and A. Japonica that had the least number of stomata. Cyperus species such as C. difformis, C. iria and C. serotinus had no stomata at upper leaf epidermis. The stomata were distributed only at lower leaf epidermis for these species. Potamogeton distinctus, on the other hand, had stomata almost at upper leaf epidermis and thus, hardly found the stomata at lower leaf epidermis. Among rice cultivars, Tongil-type had the greatest number of stomata followed by Indica-type and Japonica-type, in order. Cultivars released after 1960 had more stomata than cultivars released before 1960 for Japonica-type cultivars while stomata size had reversed trend. Jinheung had the least number of stomata (${\fallingdotseq}$ 150 per $mm^2$) while Yushin had the greatest number of stomata (350 for upper and 449 for lower leaf epidermis, respectively) among rice cultivars. Other cultivars having more than 350 stomata per $mm^2$ were Samgangbyeo, Milyang 23, Woonbongbyeo, etc.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.5
• /
• pp.801-810
• /
• 1995

부직포의 기공크기에 대한 특성을 측정하기 위해 이미지 프로세싱을 이용하였다. 아라미드부직포와 그 부직포를 시뮬레이션한 부직포에 대해서 기공의 크기를 대표하는 평균 기공크기와 그 분포를 이미지 분석의 두가지 방법으로, 즉, 형태학적인 방법과 기하학적인 방법을 통해 측정해보았다. 아라미드 부직포, 시뮬레이견 부직포이건 상관 없이 부직포의 밀도가 증가함에 따라 기공의 크기특성, 즉 기공의 면적, 수력반경, 그리고 기공내의 최대 내접원의 반경은 감소하였다. 형태학적인 방법과 기하학적인 방법은 부직포의 종류에 상관없이 기공의 크기를 측정함에 있어서 유의한 차이가 없었다. 이는 부직포내의 섬유의 배열방향이 무작위이기 때문이었다. 실제의 아라미드 부직포와 시뮬레이션 부직포의 기공크기에 대한 특성은 서로 비슷한 양상을 보여주었다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.77-83
• /
• 2020

A series of foamed plastic sheets containing biomass (as HMR container) were developed via different foaming process temperatures, and their density, porosity, WVTR, and pore morphology were evaluated. Thermal stability of samples during re-heating the food in oven, change in morphology, density, porosity, and WVTR were investigated using a simulated thermal shock process according to MIL-STD-883E assay. As such, the pore size of samples was generally increased with increasing temperature of the foaming process. It can be explained that as foaming temperature increased, the viscosity of molten resins and the repulsive force against pore expansion decreased. In addition, an increase in the thermal shock cycle reduced the pore size and WVTR, while density increased because high temperature treatment that softened the sheet matrix was followed by a low temperature incubation, which contracted the matrix, thereby changing the physical and morphological properties of samples. However, an insignificant change in density was observed and WVTR tended to be decreased, indicating that as-prepared foamed plastic sheets could be used as a high thermal stable container for HMR application. Therefore, it found that the properties of newly developed HMR containers containing biomass were dependent on the foaming process temperature. Moreover, to better understanding of these newly developed containers, further investigations dealing with foaming process temperature based on various food items and cooking conditions are needed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.32-40
• /
• 2017

In this study, the procedures for quantitative measurement of void contents of carbon fiber/epoxy composites were suggested. Two types of the composites were considered: autoclave cured composite and filament wound composite. Void contents of the composites were evaluated by the density of the composites and their constituents, which was determined from weights in the air and water, and the weight fraction and volume fraction of the constituents obtained from the digestion method and combustion method. The surfaces of filtered carbon fibers were examined by FE-SEM in order to investigate the validity of resin removal from the composites. According to the results, the resin in the composites could be fully removed by the digestion method and combustion method. Therefore, the weight fraction and volume fraction of the constituents, and void content of the composites could be quantitatively obtained by the suggested procedures.