• Proceedings of the Materials Research Society of Korea Conference
• /
• 2004.05a
• /
• pp.67-67
• /
• 2004

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.205-215
• /
• 1997

An accurate transpiration model for greenhouse tomato crop, which is liable to transpiration depression and yield loss because of low solar radiation and high humidity, could be an efficient tool for the optimum control of greenhouse climate and for the optimization of Irrigation scheduling. The purpose of this study was to develop transpiration model of greenhouse tomato and to carry out the experimental verification. The formulas to calculate the canopy transpiration and temperature simultaneously were derived from the energy balance of canopy. Transpiration and microclimate variables such as net radiation, solar radiation, humidity, canopy and air temperature, etc. were simultaneously measured to estimate parameters of model equations and to verify the suggested model. Leaf boundary layer resistance was calculated as a function of Nusselt number and stomatal diffusive resistance was parameterized by solar radiation and leaf-air vapor pressure deficit. The equation for stomatal diffusive resistance could explain more than 80％ of its variation and the calculated stomatal diffusive resistance showed good agreements with the measured values in situations independent of which the constants of the equation were estimated. The canopy net radiation calculated by Stanghellini's model with slight modification agreed well with the measured values. The present transpiration model, into which afore-mentioned component equations were assembled, was found to predict the canopy temperature, instantaneous and daily transpiration with considerable accuracy in greenhouse climates.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.370-370
• /
• 2011

I-III-IV2족의 Cu(In,Ga)Se2 (CIGS) 박막 태양전지는 3단계(three-stage) 동시증발공정을 통하여 약 19.9%의 최고의 효율을 보유하고 있다. 3단계 공정에 있어 IV2족 Se의 증발 속도 또는 증착압력은 우선 배향성 제어 및 표면 미세구조 영향 등에 큰 영향을 미치는 것으로 알려져 있다. 본 연구에서는 CIGS 박막 합성을 위한 3단계 공정에서 각 단계별 Se 분압의 변화를 주어, 각 공정 단계에서 Se 분압의 변화가 CIGS 박막의 미세구조 및 셀 효율에 미치는 영향을 분석하였다. 3단계 공정에서 Cu, In, Ga 분압은 고정시키고, Se 분압의 크기 순서대로 1, 2, 3으로 변화시켜 CIGS 박막을 제조하였다. 이 박막의 미세구조, 특히, 우선 배향성, 표면의 기공, 결정성을 제어 하기 위하여 3단계 공정에서 1st stage 이후 Se 분압을 증가시키는 방법($3{\rightarrow}1$, $2{\rightarrow}1$)과 1st stage 이 후 Se 분압을 감소시키는 방법($1{\rightarrow}3$, $1{\rightarrow}2$)을 적용하여 비교하였다. 그 결과 3단계에서 1st stage 이후 Se 분압을 증가시킴으로써 (220)/(204)의 우선 배향성을 촉진시키며, 결정성을 개선하였고, 1st stage 이후 Se 분압을 감소시킴으로써 CIGS 박막 표면의 기공을 제거하고, 결정성을 향상시켰다. 이렇게 1st stage이 후 Se 분압을 증가시킴으로써 (220)/(204)의 우선 배향성의 촉진과 결정성 개선은 단락 전류(Jsc)를 증가시켰으며, 1st stage 이후 Se 분압을 감소시킴으로써 CIGS 박막 표면의 기공을 제거와 결정성 개선은 개방전압(Voc)의 증가효과를 가져왔다.

• Membrane Journal
• /
• v.24 no.6
• /
• pp.472-483
• /
• 2014

This study is preparation of microporous membranes by using macrocyclic metal ion complexes and extended cage complexes. It is a more favorable way to existing methods because polymer and metal ion-ligand complex system provides a fine control over the phase transition behavior. Chemical functionalization of the polar surface can be obtained. Metal-templated condensation of cyclohexanedione dioxime, hydroxyphenylboronic acid in the presence of metal salts proceeds cleanly in methanol to furnish the metal clathrochelate complexes. Organic/inorganic hybrid membranes were prepared with polyethersulfone (PES), polyvinylpyrrolidone (PVP), ethyleneglycol butyl ether (BE), metal clathrochelate s and DMF by using nonsolvent induced phase inversion method. The structure of membranes was characterized with scanning electron microscopy (SEM) and microflow permporometer. The addition of Fe(II) clathrochelate complex with p-hydroxyphenyl group leads to changes of membrane morphology such as narrow mean pore size distribution, increase of surface pore density and decrease of the largest pore size.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.136-144
• /
• 2002

Melting method has long been considered difficult to realize because of problems such as the low foamability of molten metal, the varying size of cellular structures and solidification shrinkage. The parameters to solve the problem in electric furnace were stirring temperature, stirring velocity, heating velocity and foaming temperature It is important to consider the effects of induction heating, because it brings about the inner flow by the temperature gradient. Aspect ratio also depends on the induction heating. Mechanical properties are dependent on cell sizes and aspect rations. Therefore, this paper presents the effects of these parameters on the cell sizes. For the sake of this, combined stirring process was used to fabricate aluminum foam materials by the above mentioned parameters. Image analysis was performed to calculate the cell sizes, distributions, and aspect ratioes at the cross section of feared aluminum in the direction of height.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.85.1-85.1
• /
• 2018

고표면적 다공성 금속 박막 형성 기술은 타겟에서 방출된 금속 원자들이 타겟 주변에서 서로 충돌하여 나노입자를 형성한 후 기판으로 입자를 이송시켜 나노 구조를 지니는 박막을 성장시키는 기술이다. 고표면적 다공성 금속 박막 형성 기술로 제작한 다공성 박막은 열린 기공 구조를 지니고 있기 때문에 외부 기체의 확산이 용이하고 비표면적이 높다는 특징을 가지고 있다. 특히 금속 공기 이차전지 등의 배터리의 경우 전극의 비표면적이 성능을 결정하는 중요한 인자이므로 금속판을 사용하는 경우 대비 비표면적이 높은 나노구조를 사용할 경우 용량 증대에 유리하다. 본 연구에서는 공정 압력, 공정 파워, 타겟과 기판과의 거리, 칠러 온도 등 증착 공정 변수를 제어하여 표면적이 높은 아연 나노 구조를 형성하였다. 이를 분석하기 위해 SEM을 이용하여 미세구조 및 두께를 관찰하였으며, 박막 증착 전후의 무게를 측정하여 기공률을 계산하였다. 또한 XRD 분석을 통하여 결정성 및 결정의 크기를 확인하였다. 이렇게 제작된 고표면적 다공성 Zn 금속박막을 응용하여 아연 전지 성능 평가를 진행하였다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.677-682
• /
• 2003

The physical properties of sintered body made from 3 kinds of slip, F (Flocculated), M (Moderate), and D (Dispersed) for coal fly ash 70-clay 30 (wt%) were studied in terms of slip states and pore size distribution of sintered bodies. The floc particle size distribution for slip F was wider than slip D and the slip F contained flocs larger than 11 $\mu\textrm{m}$. The pore size distribution of the green body of all slips ranged over 1∼4 $\mu\textrm{m}$. The pores smaller than 1 $\mu\textrm{m}$ almost disappeared during the sintering process, while the larger pore of 2.5∼3 $\mu\textrm{m}$ growed by 1 $\mu\textrm{m}$. The pore distribution for the green body of slip F became a narrow in width and high in height after sintering and the large pore limit in a slip F sintered body was 5.1 $\mu\textrm{m}$ which is smaller than that of other slip. The slip F rather flocculated was favorable over slip D well dispersed, in offering a higher compressive strength. From these results, the mechanical strength of sintered body is dependent on the pore distribution which could be controlled by dispersion state of the slips.

• Membrane Journal
• /
• v.26 no.5
• /
• pp.372-380
• /
• 2016

The present paper reports the effect of precursor alumina particle size on pore structure and single gas permeation properties of tubular ${\alpha}$-alumina supports, prepared by a combined process of slip casting and sintering. Pore diameter of as-prepared ${\alpha}$-alumina support was highly dependent on precursor ${\alpha}$-alumina particle size. Although, increase in the precursor particle size increases the pore diameter, but the porosity of ${\alpha}$-alumina support mainly control by sintering temperature. Sintering studies reveal that as sintering temperature increased porosity of support decreased. Single gas permeance results indicate that permence is proportional to the square of pore diameter and linearly to porosity. These dependencies revealed that gas permeation trough as-prepared ${\alpha}$-alumina support was governed by viscous flow mechanism. The present announces that precursor ${\alpha}$-alumina particle size and sintering temperature are key parameters to control gas permeantion properties of ${\alpha}$-alumina supports.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.289-292
• /
• 2001

Aluminium foams, having a closed cell structure, fabricated by applying the powder compact method and an induction heating were studied. The powdered A6061 mixed with the powdered titanium hydride as a foaming agent was hot pressed into a foamable precursor. The resulting precursor was foamed by induction heating up to desired temperature. The effects of the titanium hydride content ($0.3{\~}1.5 wt.\%$), pressing pressure of the foamable precursor material (50-150kN), the forming temperature ($610{\~}690^{\circ}C$) and heating rate during foaming on the expansion behavior of the foam were investigated.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.58-58
• /
• 1994

슬립캐스팅법으로 제조한 튜브형 $\alpha$-알루미나 담체 (평균기공크기 = $0.1 \mum$)에 졸-겔 침지코팅(dipcoating) 또는 가압코팅 (pressurized coating) 법에 의하여 극미세입자 $\gamma$-AlOOH, $TiO_2, SiO_2$, 및 aluminosilicate diphasic 졸을 코팅한 후 300 ~ 500$\circ$C 에서 열처리하여 세라믹 복합막을 제조하였다. 복합막 전체에 대한 균열유무는 $N_2$ 기체투과율의 평균압력에 대한 의존성으로부터 평가하였으며, 한외여과 (ultrafiltration)에의 응용성을 규명하기 위하여 막의 재질 및 제조조건에 따른 polyethylene glycol (PEG) 수용액의 분획분자량 변화를 측정하였다. 합성 세라믹 복합막의 분획분자량 측정 결과 $SiO_2$의 경우 2,000 정도로 매우 우수하였으며 $\gamma-Al_2O_3, TiO_2$, 그리고 aluminosilcate 막들은 6,000 ~ 10,000 범위 값을 갖고 있었다. 또한 막의 기공크기 및 분획분자량을 제어하기 위한 방법으로서 $TiO_2$ 복합막을 300 ~ 700$\circ$C 에서 열처리하였으며 이들에 대한 분획분자량 변화를 비교 분석하였다.