• Korean Journal of Weed Science
• /
• v.4 no.1
• /
• pp.26-38
• /
• 1984

To investigate the varietal differences of weed competitive functions under the four different seeding and transplanting methods, rice cultivars, Milyang 23 and Sadominori, were used with the seven weeding methods, namely, weedy check, weed-free, once weeding at 3, 6, 9, and 12 weeks and two times weeding at 3 and 9 weeks after seeding/transplanting, respectively. As a result, the proper and reasonable weeding stages and times by total and respective weed group were estimated. Also the constructive characteristics for yield formations were evaluated under the different competitive conditions as affected by various cropping patterns.

• Korean Journal of Weed Science
• /
• v.15 no.1
• /
• pp.39-45
• /
• 1995

This experiment was carried out at Yeongnam Crop Experiment Station since 1992 to obtain basic information on ecology of weeds and weedy rice in direct-seeded rice fields. Annual grass weeds of Echinochloa sp., Leptochloa sp., Digitaria sp. and Setaria sp.(C4 plant) and weedy rice(C3 plant) were important species in direct seeded rice compared to transplanted rice field. Period of seedling emergence of barnyard grass was varied from 8 days to 20 days depending on seeding date while it was shorter 4 to 6 days than rice. Weed occurrence and the degree of yield loss were varied by cultivation method. In direct seeding method weeds increased 2 to 3 times compared to manual transplanting. The greatest yield loss was recorded in direct seeding(40 to 100%) followed by mechanical transplanting(25 to 35%) and hand transplanting(10 to 20%), in order. Double cropping of rice-barley was reduced weeds about 30% than rice single crop due to alleopathic effect of barley residue or stubble. Weedy rice(red rice) occurrence was closely related with seeding date and tillage methods. Early seeding and reduced tillage enhanced the growth of weedy rice.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.128-133
• /
• 2003

우리나라는 국토의 약 68%가 산악지형으로 포장의 경사와 토양중의 자갈이 밭작물의 재배와 기계화에 장애가 되고 있다. 포장중의 자갈은 토양의 보습력과 통기성을 향상시키고 경사지에서의 토양침식을 방지하는 긍정적 측면이 있으나, 자갈이 토양 표면에 산재할 경우 작물의 발아와 입모를 억제하고, 작물생육을 위한 토양환경을 조성하는 경운작업 재배관리 작업을 어렵게 하기 때문에, 농민들은 포장내의 자갈을 제거하기 위해 많은 노력을 기울이고 있다. 특히 관행 로타리 작업 시에는 자갈이 대부분 토양 표면에 노출됨으로 생육환경 및 기계작업 환경을 더욱 악화시키게 된다. 2cm이상의 자갈이 토양 표면에 있을 경우 기계 파종이나 이식이 어렵고 발아이후의 생육도 좋지 않게 된다. 그러나 지중에 존재하는 자갈은 토양의 투수성을 향상하여 경사지에서 토양침식을 막아주고, 수분과 온도의 보지력을 크게하고 토양 통기성을 향상시키므로 뿌리의 발육을 촉진해 준다. (중략)

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.292-297
• /
• 1988

kW/1,000 kg in conventionally polished barley and 105 kW/1,000kg in cut-polished barley. Whiteness, water uptake ratio and expanded volume of cooked barley were 45.5, 225.7 and 283% in conventionally polished barley and 49.5, 312.7 and 318% in cut-polished barley, respectively.

• Journal of Biosystems Engineering
• /
• v.26 no.6
• /
• pp.495-502
• /
• 2001

Upright positioning of garlic cloves has been considered as an essential process for mechanical planting because positioning affects the quality and yield of garlic production. Due to the geometrical uniqueness and irregularity of garlic cloves in shape, the planting operation has been conducted by manual. Manual planting requires intensive labors and high production cost. The overall Boal of this research was to develop a garlic clove planter which maintains a garlic clone upright. Specific objective was investigating planting condition and physical properties of garlic clove. The results were summarized as fellows : Based on the survey results, a garlic clove planter should have a planting capacity of at least 140 cloves in a pyung (3.3m$^2$) with the row spacing of 140mm and hill spacing of 120mm for a productive cultivation.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.531-536
• /
• 2003

This study was carried out to develop a vacuum nozzle seeder for large seeds and performance was tested on seed feeding, arranging. and sowing peformance. The results of this study were as follows： The operation of feeding device of the seeder was programmed to operate a period of setting time after sowing 6 rows. The setting time was decided based on a discharged seed by the angular speed of feeding roller. The arranging accuracy of 'tuktozwa', 'hukjong' and 'chambak' was 96.4％, 95.2％ and 89.4％ respectively. The working performance was 75.6sheet/hr which was 3.8 times higher than that of manual work. An average seeding rate of 1 grain was 97.8％.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.1
• /
• pp.49-55
• /
• 1997

For the labor-saving cultivation of barley in rice-barley double cropping system in paddy field, a series of expriments on the effect of rice straw application were carried out at the National Yeongnam Agricultural Experiment Station from 1992 to 1993. The affection of phenol compounds released from fresh rice straw could be lessened when seeded under rice straw in the soil and that made emergence rate increase by 11％, compared with that on application on the rice straw. Although utilization of rice straw as an organic material caused the poor growth of barley in early stage, it could be enhanced the culm breaking strength. On this reason, affected by rice straw, grain yield was increased from 8％ in common barley and up to 20％ in malting barley. The more nitrogen, CaO$_2$2 and SiO$_2$ applied, the more decomposition of rice straw accelerated from 2％ to 6.9％. On the application of rice straw as an organic material in malting barely cultivation, the content of crude protein was decreased while 1,000-grain-weight and grain assortment was increased.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.58-66
• /
• 1979

동력경운기용 두류의 무경운 파종기에 부착하여 사용하는 구절기중에서 소요견인력이 작고 구절작업정도가 양호한 구절기의 개발을 위한 기초자료를 얻기 위하여 구동식 토조에 인공강토를 채우고 원판형 및 호우형 구절기의 소요견인력과 이에 영향을 미치는 인자들의 관계를 구명코자 실내모형 확험을 실시하여 다음과 같은 결과를 얻었다. 원판형 구절기에 대하여 직경별로 조립각을 $8^{\circ}$ 와 $16^{\circ}$, 경심을 3 cm 와 6cm로 변화시키면서 2.75cm/sec의 속도로 견인력을 측정한 결과 원판의 직경이 약 28cm인 경우에 견인력이 최소로 나타났고, 직경이 이보다 크거나 작은 때는 견인력이 증가하는 경향을 나타냈으며 비저항도 대체로 비슷한 경향이었으나 원판의 직경이 약 30cm 일 때 최소로 나타났다. 종자파종의 심도조절을 목적으로 작구심(3cm 및 6 cm)과 견인력과의 관계를 조사하였던바, 경심과 견인력과의 관계는 거의 직선적인 변화를 나타냈으며 견인력에 영향을 미치는 인자중에서 경심의 영향이 가장 컸음을 알 수 있었다. 일반적으로 조립각 미 주행속도에 별 영향없이 경심 3cm 및 6 cm 공히 견인력은 직경 약 28 cm에서 , 비저항은 약 30cm에서 최소의 값을 나타내었다. 파종기의 작업성능과 관계가 깊은 주행속도 및 파시의 조절을 목적으로 원판의 조립각과 주행속도가 견인력에 미치는 영향을 조사했던 바, 조립각과 주행속도가 증가함에 따라 모두 견인력이 증가하는 경향을 나타내었으나 견인력에 미치는 영향은 주행속도가 더욱 크게 나타났다. 원판형 구절기와 호우형 구절기를 비교하기 위하여 쐐기각이$16^{\circ}$ 이고 리프트 각이 $20^{\circ}$ 인 호우형 구절기와 조건이 비슷한 조립각$16^{\circ}$ 의 원판형 구절기의 견인특성을 비교한 결과 직경 30cm 인 원판형의 경우는 비저항이 0.35-0.5kg/$cm^2$인데 비해 호우형의 경우는 0.71-1.02kg/$cm^2$로 나타나 호우형의 견인저항력이 평균 2 배정도 크게 나타났고 작구상태고 원판형의 경우보다 불량하였다.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.49-59
• /
• 2019

The field trial was performed to evaluate the rice growth and yield in different direct seeding methods after Italian Ryegrass Harvest The required time for seed emergence was for 7 ~ 8days in the tested direct seeding methods and there was high in seedling establishment in order of wet hill-seeding with iron-coated seeds > water seeding with iron-coated seeds > wet hill-seeding with soil coverage with pregerminated seeds. The rice plant height was shorter in the tested direct seeding methods than that of machine transplanting until 45day after seeding but there was not significant difference in terms of statistical analysis at 63day after seeding. The growth of tiller number in the rice plant was high in water seeding with iron-coated seeds and wet hill-seeding with soil coverage and low in wet hill-seeding with iron-coated seeds compared to machine transplanting. The yield component in the tested direct seeding methods was not significant difference in terms of statistical analysis. The milled rice yield in the tested direct seeding methods was higher 2 ~ 8% being with 4.94 ~ 5.24t/ha than that of machine transplanting but there was not significant difference in terms of statistical analysis. The percentage of head rice was low in the tested direct seeding methods compared to machine transplanting. The weedy rice was not occurred in the tested rice cultivation methods. In conclusion the direct seeding method would be recommended to be a suitable to in following by Italian ryegrass harvesting in southern area of Korea in terms of reduction in production cost and high income basis for rice growing farmers.

• Korean Journal of Organic Agriculture
• /
• v.15 no.1
• /
• pp.59-69
• /
• 2007

This experiment was conducted to study the spring productivity and feeding value of hairy vetch varieties. We also measured DM yield and feeding value by analyze CP and CF that authors made possible to calculate TDN and RFV. The results can be summarized as follows; Dry matter yield were increased earlier autumn seeding date and later cut in spring. Differences of dry matter yield in earlier cut in spring was high in order of Ostsaat, Welta, Vv4712, Penn-02, Common and Minnie. Crude protein(CP) yield was increased when earlier autumn seeding date and later cut in spring. Total digestible nutrient(TDN) yield of hairy vetch varieties was decreased when later autumn seeding date, and was increased when later cut in spring. TDN yield was highest in Ostsaat and Welta varieties had highest dry matter yield. Acid detergent fiber(ADF) content was decreased when later autumn seeding date and was increased when later cut in spring. Neutral detergent fiber(NDF) content was decreased when later autumn seeding date. Average values for relative feed value(RFV) were 157% and 132% in both cut. It shows that a high feed value in all of hairy vetch varieties. Above all, the results presented that the optimal seeding date for cultivating hairy vetch in the central region of Korea is between the 10th to the 20th of September. Because Ostsaat and Welta had significantly high dry matter yield we expected Ostsaat and Welta have a higher wintering ability.