• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.91-91
• /
• 2017

최근 국민 삶의 질 향상, 건강한 먹거리 인식 및 국내 여건 변화 등으로 벼농사에 비해 상대적으로 소득 수준이 높은 밭작물 생산에 대한 수요가 증가하고 있으나, 관련 농업기계 개발이 미흡하여 밭농업 기계화가 절실한 실정이다. 밭작물의 경우 기계화율이 2015년 56.3%이며, 특히 파종, 이식작업이 5%, 수확작업이 13.3% 수준으로 열악한 실정임. 경운정지 기계화율은 99%를 넘으며, 방제 작업도 기계화율이 85~99% 수준으로 다른 작업에 비해 높은 실정으로, 파종, 이식, 수확작업의 기계화는 밭농업 일관기계를 위하여 반드시 필요하다. 감자는 주요 밭작물 중 하나로, 최근 가공용 소비로 수입량이 증가하여 국내에서 자주식 굴취/선별/수집형 수확기(2011, 농촌진흥청)가 개발되었으나, 가격이 높고 표피손상 등 개선이 필요하여 트랙터 부착형 수집형 감자수확기가 개발 중에 있다. 따라서 본 연구에서는 수집형 감자 수확기 시작기 구조해석을 하려고 한다. 우선 시작기의 도면을 CATIA를 활용하여 3D로 작성한 뒤, MIDAS NFX 시뮬레이션 및 구조해석 프로그램으로 구조해석을 진행하였다. 수행한 해석으로는 선형정적해석으로서 외부하중에 대해 구조물의 변형을 검토하는 해석이다. 재질은 SM45C로 선정하였고, 접촉조건과 구속조건을 설정한 뒤 감자수확기 굴취부에 집중하중을 200 ~ 1000 N 까지 200N 간격으로 선형정적해석을 진행하여 Von-Mises 응력, 허용응력, 극한응력, 안전율을 해석하였다.

• Korean Journal of Weed Science
• /
• v.15 no.2
• /
• pp.105-114
• /
• 1995

Differences in critical period of weed competition were investigated among five types of rice(Oryza sativa L.) cultivation. Increase in weed-free period resulted in 1-2 days delay of heading date in machine transplanting and direct-seeding as compared with complete weed-free plot. When weedy period increased, there was no difference in heading date in transplanting cultivations. In direct-seeding, however, weedy period of 7-10 weeks after seeding(WAS) resulted in 4-7 days delay of heading date, whereas further increase in the weedy period caused rather 5-6 days advance in heading date. Weed-free period did not significantly affect yield components in conventional hand transplanting. In machine transplanting with 30-day-old seedling decreases in percent ripening and 1,000-grain weight were caused by weeds emerged within 4 weeks after transplanting(WAT). All yield components were decreased due to weedy period in machine transplanting with 10-day-old seedling. In direct-seeding weedy periods caused to decrease in number of panicles, number of spikelets, percent ripening, and 1,000-grain weight were 8-9, 4-5, 3-4, and 8-10 WAS, respectively. The critical periods of weed competition were determined as the following. In conventional hand transplanting weed-free must be maintained for either 4 weeks after transplanting or the rest period after 8 WAT. In machine transplanting with 30-day-old seedling weed-free must keep for either 5 weeks after transplanting or the rest period after 8 WAT. In machine transplanting with 10-day-old seedling weeds must be removed for either 5 weeks after transplanting or the rest period after 7 WAT. Weed-free must be kept between 5 and 7 WAS in flood direct-seeded rice and between 6 and 9 WAS in dry direct-seeded rice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.375-384
• /
• 2014

Kenaf (Hibiscus cannabinus L.) was recognized as a potential source of forage. But the domestic cultivation techniques are not set standards yet. So we tested the basic culture techniques during 2012~2013 for getting a high yield and good grade forage production system. The best seeding method for mechanized planting (corn planter used) was hill seeding with $20{\times}20cm$ seeding distance. When we treated hill seeding with $20{\times}20cm$, the yield what we could get was 13,641 kg/10a and it was 32% more than that of conventional practice hill seeding with $20{\times}30cm$ seeding distance. The proper seeding date for getting high yield was May 1. In May 1, the yield per 10a was reached 13,423 kg, and it was 30% more than that of seeding at May 30. More over the crude protein content which was important factor for determinating forage nutritive value was 12.7% and it was higher 1.8% (relatively 16.5% high) than that of May 30 seeding. The most effective herbicide for kenaf was Fluazipof-p-butyl. It's herbicidal rate was 97% and phyto-toxicity was less than 5%. Regional adaptability for Jeollabuk-Do including Imsil Gun, Kochang Gun and Sunchang Gun were identified that the stable cultivation were possible in these area with average yield 12,400 kg/10a and it was about 1.7 times as compared to corn harvest.

• Korean Journal of Weed Science
• /
• v.13 no.2
• /
• pp.114-121
• /
• 1993

Differences in need occurrence and competition were investigated among five types of rice(Oryza sativa L.) cultivation. Dry weights of weeds in between transplanting and/or seeding and heading date showed in the decreasing order of dry direct-seeded, flood direct-seeded, machine transplanting with 10-day-old seedling, machine transplanting with 30-day-old seedling, and conventional hand transplanting. A similar trend was obtained with application of weedy followed by weed-free. Weed-free periods allowed to decrease by 20% dry weight of rice were 3 weeks after transplanting(WAT) in transplanting cultivations, 5 weeks after seeding(WAS) in wet direct-seeded rice, and 7-8 WAS in dry direct-seeded rice. On the other hand, weedy periods as determined by the same criterion were 9 WAT in conventional hand transplanting and machine transplanting with 30-day-old seedling, 7 WAT in machine transplanting with 10-day-old seedling, 8 WAS in dry direct-seeded rice, and 6 WAS in flood direct-seeded rice.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.440-445
• /
• 2003

식물의 공장적 생산에 있어서 재배적인 측면에서 중요한 요소 중의 하나는 환경조절과 양액제어 그리고 종자발아기술, 녹화기술일 것이다. 그 중에서도 종자를 파종한 후의 발아기간이 일정하지 않거나 조절이 어려우면 엽채류의 공장적 생산에서 중요한 매일 정식, 매일 수확이 어렵게 된다. 일반적으로 상추의 발아적온은 18-$25^{\circ}C$이다. 그러나 작물생육에 중점을 두어 환경을 조절하는 현재의 제어온실내에서는 발아적온을 맞추기가 어렵다. 따라서 별도의 발아장치가 필요하다. (중략)

• 농업기술회보
• /
• v.52 no.4
• /
• pp.16-17
• /
• 2015

농사는 잡초와의 싸움이라고 하였다. 벼농사에서 파종, 육묘, 이앙 등의 재배과정은 기계화로 인해 투입 시간이 매년 절감되고 있으나 잡초 방제 투입 시간은 증가하고 있을 뿐만 아니라 제초제 사용 횟수도 증가하고 있다. 이러한 원인의 가장 큰 이유는 논에서 제초제 저항성 잡초들이 전국적으로 빠르게 확산하고 있기 때문이다. 제초제 저항성 잡초의 발생 원인과 잡초 제거 방법에 대해 알아본다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.10a
• /
• pp.195-195
• /
• 2017

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1990.05a
• /
• pp.92-93
• /
• 1990

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2007.11a
• /
• pp.199.2-199.2
• /
• 2007

• 한국석유지질학회:학술대회논문집
• /
• autumn
• /
• pp.68-84
• /
• 1999

Biodegradation is a natural weathering process by microorganisms to decompose spilled oil or environmental contaminants. To accelerate this process, applying nutrients (fertilizer) or more microorganisms to naturally occurring microorganisms is called 'Bioremediation.' Presently, most popular response technique to spilled oil is mechanical cleanup using booms or skimmers. For the alternative to this technique, chemical dispersants, in-situ burning are used. Another promising alternative is bioremediation and it can clean oil contaminated seashore during enough time. In this paper, types of bioremediation technologies, its usage potential, and important consideration issues when applying this technique were summarized.