• Analytical Science and Technology
• /
• v.6 no.2
• /
• pp.207-215
• /
• 1993

$Si_3N_4$ powders were mixed with sintering additives($3Y_2O_3{\cdot}5Al_2O_3$, YAG) by coprecipitation method. Mixing homogeneity, sintered and mechanical properties of coprecipitation-mixed powder compacts were compared with those of mechanically-mixed ones. SIMS-analysis for composition on the surface and in the matrix of prepared powder mixtures showed that the added YAG exists mainly on the $Si_3N_4$ powder surfaces in a form of coating. From this result it could be concluded that coprecipitation method is superior to mechanical mixing in the mixing homogeneity. This mixing homogeneity can accompany an improvement in sintered density, microstructure and consequently the mechanical properties of sintered bodys.

• Journal of the KSME
• /
• v.42 no.4
• /
• pp.42-45
• /
• 2002

이 글에서는 카오스의 이론적인 관점에서 성공적이라 할 수 있는 3차원 유동의 적용 예 중에서 산업적으로 관심의 대상이 될 수 있는 파이프 유동에서의 혼합증진, 혼합탱크 내의 혼합증진, 단축압출기에서의 혼합증진, 그리고 마이크로 채널 유동에서의 혼합증진 등 네 가지 유동에 대해 소개하도록 한다.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.204-210
• /
• 2013

Effects of additives (lubricant and antioxidant) and melt-blending condition (temperature, time and rotor speed) on the mechanical properties of polypropylene-based wood polymer composites (WPCs) were investigated. WPCs were prepared by melt-blending followed by compression molding. To understand melt-blending procedure, torque change of the WPC melt-blend was monitored. Maleic anhydride modified PP and nanoclay were used as a compatibilizer and a reinforcing filler, respectively. UTM and izod impact tester were used to measure the mechanical properties of the WPCs and a color-difference meter was used to measure the discoloration of the WPCs according to melt-blending condition. The mechanical properties showed that the optimized melt-blending condition was $170^{\circ}C$, 15 min, and 60 rpm. The mechanical properties of the WPCs decreased with increasing lubricant and antioxidant content. The two step method, adding wood flour later separately during melt-blending, was more effective than the typical one step method for improving the mechanical properties of the WPCs.

• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.715-720
• /
• 1995

기계적 합금화법에 의한 비정질화 과정을 Ni-Ta계 및 Cu-Ta계에 대하여 조사하였다. Ni-Ta합금계는 혼합엔탈피가 음이나, Cu-Ta계는 혼합엔탈피가 양인 열역학적으로 대조적인 합금계이다. 볼밀 중 발생하는 원자구조 변화를 중성자회절법을 이용하여 관찰하였다. 두 합금게에 있어서 기계적 합금화에 의한 비정질상이 생성되었다. 비정질 Cu-Ta합금의 local원자구조를 혼합엔탈피가 크게 음인 Ni-Ta계의 결과와 비교하였다. 그 결과, 대조적 특성을 가진 두 합금계임에도 불구하고 원자크기가 작은 Ni 및 Cu가 bcc Ta의 결정격자 속으로 우선적으로 침입함으로써 비정질화가 진행됨을 알 수 있었다.

• Journal of the KSME
• /
• v.30 no.4
• /
• pp.358-366
• /
• 1990

이 글은 최근 대두되는 CFC 문제와 연관하여 혼합냉매를 사용함으로서 얻어지는 이점과 이들의 예를 알아보고 이에 수반하여 열교환기의 설계 및 제작에 있어서 필수적인 역할을 하는 혼합매 체에서의 2상유동열전달의 중요성과 체계적인 연구의 필요성을 강조하기 위하여 기술한 것이며 이 분야에 대한 새로운 지식을 전반적으로 집약하거나 자료를 광범위하게 수집한 것이 아니다.

• The Korean Journal of Rheology
• /
• v.7 no.3
• /
• pp.173-180
• /
• 1995

LLDPE/LDPE 혼합물의 유변 물성과 필름가공특성 필름 물성 및 LLDPE의 extrudate 표면상태를 살펴보았다. LLDPE에 LDPE를 혼합함으로써 용융 강도가 크게 향상 되는 것을 볼수 있었으며 혼합비에 따라 필름의 기계적 물성이 변화하는 것을 볼수 있었다. 즉 최고의 물성을 나타내는 적절한 혼합비율이 존재하였다. 본논문에 사용된 LLDPE/LDPE 혼합물에 있어서는 LDPE의 함량이 15∼30wt%일 때 가장 우수한 기계적 물성을 얻을수 있 었다. LLDPE 필름의 표면 불량 문제를 보기위하여 capillary를 이용하여 LLDPE extrudate 의 표면 튀틀림(distortion)의 진행순서를 살펴본 결과, 전단 응력이 0.23MPa 일때 sharkskin이 발현함을 볼수 있었다.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.997-1004
• /
• 1995

Intermetallic compound NbAl₃and amorphous phases were synthesized by mechanical alloying of elemental powder mixtures of niobium and aluminum. The composition of the powder mixtures was Nb-45wt%Al(75at%Al). The mechanical alloying was performed with a high energy SPEX 8000 mixer/mill up to 72 hrs. The resulting powders were analyzed by XRD, DTA, SEM and TEM. The mechanically alloyed powders exhibited lamellar structures in the early stage. And the elements of Nb and Al were homogeneously distributed over the Powder when a steady state was reached. An intermetallic compound, NbAl₃, was formed by mechanical alloying for 4 hrs. The mechanically alloyed powders exhibited a large exotherm around 600℃, corresponding to formation of stable NbAl₃and stress relief.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.113-113
• /
• 2004

실제 사용중인 기계나 기계구조물은 다양한 환경 및 복잡한 설계조건으로 인하여 변동하중과 다축에서 작용하는 혼합모드 하중 상태에 놓이는 경우가 대부분이다. 하지만, 순수 모드 I 하중상태 하에서의 연구는 활발히 이루어졌으나, 실제 구조물에서 대부분 발생하는 혼합모드 하중상태 하에서의 연구는 아직 부족한 실정이다. 또한 기계구조물내의 많은 성분요소에 존재하는 작용 하중 방향에 수직적이지 않게 되며, 초기균열의 균열선상에서 성장하지 않는다.(중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.972-977
• /
• 2017

The propellant tile and crack which account for the greatest proportion of solid rockets are profoundly affected by viscosity and mechanical properties of solid propellant. In this paper solid propellant with nitrate ester polyester(NEPE) system has been researched for the viscosity, mechanical properties and burning properties with size and mixing ratio of RDX. the viscosity of propellant was changed significantly depending on the size of RDX and mixing ratio, and mechanical properties of NEPE system propellant were also varied. Considering both lower viscosity and stable mechanical properties, the optimum size and mixing ratio of RDX can be identified as the main factors to the NEPE system propellant.

• Composites Research
• /
• v.20 no.6
• /
• pp.1-7
• /
• 2007

Expanded graphite/carbon fiber hybrid conductive polymer composites were fabricated by the preform molding technique. The conductive fillers were mechanically mixed with a phenol resin to provide an electrical property to composites. The conductive filler loading was fixed at 60wt.% to accomplish a high electrical conductivity. Expanded graphites were excellent in forming a conductive networking by direct contacts between them while it was hard to get the high flexural strength over 40MPa with using only expanded graphite and phenol resin. In this study, carbon fibers were added in composites to compensate the weakened flexural strength. The effect of carbon fibers on the mechanical and electrical properties was examined according to the weight ratio of carbon fiber. As the carbon fiber ratio increased, the flexural strength increased until the carbon fiber ratio of 24wt.%, and then decreased afterward. The electrical conductivity gradually decreased as the increase of the carbon fiber ratio. This was attributed to the non-conducting regions generated among the carbon fibers and the reduction of the direct contact areas between expanded graphites.