• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.254.2-254.2
• /
• 2013

Cu wire 발열패드는 대중화된 히터로 많이 이용되지만 높은 소비전력(70 w이상)으로 에너지 효율을 중요시 하는 미래 소재로는 적합하지 않아 효율이 높은 발열 소재의 연구가 이루어지고 있다. 이에 본 실험에서 Graphite표면에 Amide 기능화를 유도된 Carbon nanotube (Electrical Conductivity $10^5$ s/cm, Thermal Conductivity >3,000 w/mk)를 분산 시켜, Graphite의 우수한 전기 전도도의 특성을 이용할 뿐만 아니라 Carbon nanotube의 접착 특성을 통해 물리적 특성을 향상시켜 면상발열체의 도막 특성 향상뿐만 아니라 효율적 발열을 유도 하고자 한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.4
• /
• pp.292-303
• /
• 1998

Recent study has demonstrated that some magnetic properties are sensitive to the microstructural state of material. The ASTM A 508 Gr. 3 reactor pressure vessel steel has various microstructural changes including martensitic and bainitic phases, and various sizes of grain and precipitates in the weld heat-affected zone (HAZ). To correlate the microstructural state with Barkhausen noise (BN), specimens were prepared through simulating various weld thermal cycles using a thermal simulator. The conventional magnetic properties, i.e. coercive force, remanence and maximum induction, did not change significantly, whereas the BN amplitude and energy during a magnetization cycle changed markedly with microstructural state. The BN increased with increasing grain and carbide sizes, and the tempered bainite structure showed higher BN parameter than tempered martensite.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.825-832
• /
• 1995

The effect of loading variables and temperature on fatigue crack growth rate in SA508 Cl.3 nuclear pressure vessel steel was investigated in air environment Crack growth rate tests on compact tension specimen of thickness 12mm were conducted by using sinusoidal waveform. The crack length was monitored by compliance method. Test conditions were at 0.1 and 0.5 of load ratio, at 1 and 10 Hz of loading frequency, and at room temperature to 40$0^{\circ}C$. At the lower temperatures, the fatigue crack propagation was not affected by the frequency and temperature, while at the higher temperatures above 12$0^{\circ}C$, fatigue crack growth rate increased with decreasing loading frequency and increasing temperature. This accelerated fatigue crack propagation was associated with the increase of oxidation rate at the ahead of crack tip. Fatigue crack growth rate increased with in-creasing the load ratio. The effect of load ratio was more significant at the lower temperature, while the dependence on load ratio decreased with increasing temperature. The sensitivity of load ratio to temperature can be explained by crack closure with the oxidation process.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.2-2
• /
• 2015

최근 국지성 집중호우 및 돌발홍수와 같은 급격한 기상변화로 인한 기상재해의 발생빈도가 증가함에 따라 기존 지상 기상관측소로부터 얻어지는 직접탐측 자료보다는 기상레이더와 위성영상 등 원격탐측 자료를 사용한 수문분야의 연구가 활발하게 진행되고 있다. 기상레이더는 넓은 지역에 걸쳐 실시간으로 강수현상 감시가 가능하며 지상우량계로는 파악이 불가능한 미계측 유역을 통과하는 국지적인 호우현상이나 강우장의 이동 및 변화의 파악도 빠른 시간에 가능한 장점이 있다. 본 연구는 기상레이더 공간적 분포와 지상관측소(AWS 및 ASOS) 자료를 연계한 통계적 레이더 강수량 추정(Quantitative Precipitation Estimation, QPE)과 레이더 강수장을 직접 추적하는 강수장 예측(Quantitative Precipitation Forecast, QPF)를 연계한 해석방안을 수립하였으며, 모형 적용과정은 다음과 같다. 첫째, 강우장의 공간적인 이동을 고려하기 위해 강우장으로 부터 이류(advection)패턴을 추출하여 각 강우세포가 가지는 이동방향 및 이동속도를 고려한 강우장 추적기법을 통하여 2시간의 선행시간을 가지는 강우장을 예측하고자 한다. 둘째, 과거 기상레이더 이미지와 지상관측소의 강수 특성을 파악한 후 앞서 예측된 레이더강우장의 형태와 가장 유사한 과거 레이더강우장과 동일 시간대에 지상관측소 강수시계열을 시나리오 형태로 구축한다. 본 연구를 통하여 개발된 기상레이더 영상 이미지 상관분석 기법을 활용한 초단기강우예측은 집중호우시 홍수 예 경보를 위한 수문모형의 입력자료로 활용이 가능하다. 즉, 수문모형과 연계한 고해상도 단기홍수 예측기술 적용이 가능할 것으로 판단되며, 향후 실시간 재해 예 경보에 활용성을 평가하고자 한다.

• (The)Study of the Eastern Classic
• /
• no.37
• /
• pp.473-507
• /
• 2009

The purpose of this study is to understand Zhuxi's Taoxuezhengzhi(道學政治) by reorganizing both his political opinion in each different political situation and his consistent political consciousness appeared in his whole political career. He concluded that the politics was the real problematic in Southern Sung, which made its structure distorted. This distorted structure of politics had widely rooted in whole sphere of society. In order to cure this political problematic, Zhuxi had focused on huangdi(皇帝) and chaoting(朝廷). That is why people is the basis of State and the result of politics, while huangdi and chaoting is the basis of politics and the beginnig of politics. According to Zhuxi, forming their political power group of their own will by using huangdi's power, the political elites close to only to huangdi made the function of chaoting unstable, with the result that the political decay produced. In chaoting, it resulted in the weakness of huangdi's power, the collapse of official discipline(紀綱), and the absence of public opinion(公論) and public aggreement(公議). Beyond chaoting, it resulted in the absence of political trust and the degeneration of public morals(風俗). In the Southern Sung were not altered the political orientation and culture based on the political decay, but only political orientation and characteristics of political elite only altered. This proves Zhuxi's approach that all problems in Southern Sung could resolve by the political approach. Zhuxi had suggested political issues in office. The alternatives for those political issues had basis of the theme, the one that saving people(恤民) is the purpose of politics. However his political ideas and the execution of them had been occsionally collapsed by the complex political structue, the mechanisms of political power, and the sameness and privatization of political geography in Southern Sung. Qingyuandanghuo(慶元黨禍) was the final stage of his political frustration, with the result that it led to the failure of Zhuxi's taoxuezhengzhi and interrupted the tradition of taoxue(道學) for the time being.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.421-424
• /
• 2008

This paper proposes an adaptive noise suppression system based on human auditory model to enhance speech signal that is degraded by various background noises. The proposed system detects voiced and unvoiced sections for each frame and implements the adaptive auditory process, then reduces the noise speech signal using neural network including amplitude component and phase component. Base on measuring signal-to-noise ratios, experiments confirm that the proposed system is effective for speech signal that is degraded by various noises.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.284-289
• /
• 1996

국산 원자로 압력용기강(ASME SA508 cl.3)을 대상으로 표준 샤피충격시험편(2 mm V- notch)과 피로균열(precracked Charpy) 시험편을 제작하여 계장화(instrumented)충격시험을 실시하고, 충격시험시 하중점(load point)의 변위(displacement) 혹은 시간의 변화를 하중의 변화와 함께 측정하였다. 측정결과를 파괴현상 및 파괴역학과 연계시켜 해석하므로서, 가능한한 소량의 시험편(혹은 시험공정)을 사용하여 필요로 하는 인성평가 관련 정보를 획득할 수 있도록 시도하였다. 그 결과, 파괴과정을 나타내는 하중의 변화를 이용하여 Shear fraction 을 예측할 수 있었고, 하중의 변화와 관계된 변위로부터 Lateral expansion을 추정할 수 있었다. 피로균열 시험편 시험결과로 부터는 충격시의 항복하중, 항복변위, 최고하중 등을 획득하여 균열크기의 함수로 표시되는 시험편 Compliance 를 계산하였고, Equivalent energy 법과 J-integral 법을 적용하여 원자로 압력용기강의 탄소성 동적파괴인 성을 평가할 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.652-657
• /
• 2009

This paper proposes an adaptive noise suppression system based on human auditory model to enhance speech signal that is degraded by various background noises. The proposed system detects voiced, unvoiced and silence sections for each frame and implements an adaptive auditory process, then reduces the noise speech signal using a neural network including amplitude component and phase component. Based on measuring signal-to-noise ratios, experiments confirm that the proposed system is effective for speech signal that is degraded by various noises.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.2
• /
• pp.91-102
• /
• 1993

The elastic-plastic fracture thoughness J sub(IC) of Nuclear Reactor Vessel Steel(SA 508-3) which has high toughness was discussed at temperatures RT, $-20^{\circ}C$, $200^{\circ}C$ and 1/2/CT specimen was used for this study. Especially the two methods recommended in ASTM and JSME were compared. It was difficult to find J sub(IC) by ASTM R-curve method with the specimen used for this research, while JSME R-curve method yielded good result. The stretched zone width menthod gave slightly larger J sub(IC) values than those by the R-curve method for SA 508-3 steel.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.1
• /
• pp.111-119
• /
• 1995

The elastic-plastic fracture toughness($J_{IC}$) and fracture resistance (J-R curve) of SA508-3 alloy steel used for nuclear reactor pressure vessel are investigated by using CT-type specimens. Fracture toughness tests are conducted by unloading compliance method and multiple specimen method at room temperature, -2$0^{\circ}C$ and 20$0^{\circ}C$. The apparent negative crack growth phenomenon which usually arises in partial unloading compliance test is well known. The negative crack growth phenomenon in determining J sub(IC) or J-R cure from partial unloading compliance experiments may be eliminated by the offset technique. In this study, the evaluation of $J_{IC}$ multiple specimen method recommended by the JSME gives the most reliable results by using half-size CT(similar-type) specimens.