• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.456-461
• /
• 2012

To verify the utilization of biomass as energy, the combustion characteristic has been studied by an experimental combustion furnace under an isothermal and non-isothermal combustion. The wood pellet, rice straw and rice husk were used as biomass samples in this work. The characteristics of emission gases, dusts and residues from biomass combustion have been analyzed and compared with those of reuse derived fuel (RDF). From isothermal combustion experiments, it was found that the incomplete combustion of rice straw was greater that that of rice husk, wood pellet and RDF. This is due to the fact that the combustion reaction rate of the rice straw was faster than that of other samples, and the oxygen concentration in rice straw combustion was rapidly decreasing. It was also found that $NO_{X}$ concentration of emission gas from wood pellet combustion was the lowest. From non-isothermal combustion experiments, it was found that all samples were burned before $900^{\circ}C$. Also, the temperature range of $NO_{X}$ emission was similar to that of CO emission, on the other hand, $SO_{2}$ was emitted at a higher temperature than that of CO emission.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.89-96
• /
• 2010

In this research, exterior material combustion experiment was really tested to evaluate fire risks of aluminium complex panel which is used a lot for building exterior material. As a result, We saw fast fire spreading of aluminium complex panel. The reason is polyethylene in aluminum complex panel combust spreading fast fire flame vertically. In this test, the highest heat release rate of aluminum complex panel was 1,144 kW and surface temperature which is measured by thermocouple went up to more than $903.3^{\circ}C$, that temperature is quite a higher than $660^{\circ}C$ which is aluminum melting temperature. So, fire of aluminum complex panel can be evaluated to give us severe damage both by fast fire spreading vertically and by fire spreading through openings internally. These results from real experiment will be able to use to predict fire spreading of aluminum complex panel by comparing to modeling materialization of aluminum complex panel in the future.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.433-436
• /
• 2005

The combustion behavior of initiators and can-type ignitor, acting on vacuum pressure, was invested. It was found that if the ignited propellants of a can-type igniter were exposed at certain level of low pressure, it would be burnt improperly or even be extinguished. When we design the can-type igniters for some rocket motor, it is most important that the pressure built-up by the gases which were already burnt inside of the igniter case keep as high as possible. For this purpose, it is recommended that the ignitor case have some strength to produce as much gases as possible before breaking out and the free volume be kept as small as possible.

• Plant Journal
• /
• v.15 no.3
• /
• pp.35-41
• /
• 2019

In this study, we investigated the effect of the generation of NOx and CO by adjusting the overfire air supply position and ratio using the boiler that was converted from coal burning to wood pellet boiler. When the amount of the overfire air is relatively increased, the amount of NOx is slightly decreased but CO is sharply decreased when burning at low excess air ratio (1.10) that is due to a small fuel particle size. However, NOx slightly increased when burning at high excess air ratio (1.33) due to the large fuel size, but CO was hardly affected. Also, When the amount of overfire air was same, The more supply position was concentrated to upper portion of the main combustor, the more NOx and CO was lowered. And in case of the excess air ratio was high, the generation of NOx and CO I can see that it keeps the level irrelevant to the amount of air for the second stage combustion.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.285-290
• /
• 1998

KALIMER 고속로의 기본 핵연료인 U-l0Zr 핵연료봉의 노내 성능시험을 위해, 러시아의 BR-10 연구용 고속원자로에서 핵연료노내조사 Program이 1997년부터 수행되고 있다. 1 차년도에는 핵연료 시편의 설계 및 제조와 금속합금 핵연료의 균질도, 밀도, 열전도도 등의 노외 특성 시험이 수행되었다. U-l0Zr 핵연료심은 Arc 용해로 제조되었는데, 합금의 구성 원소들은 비교적 균일하게 분포되었다. 핵연료 시편은 2 개가 제작되었는데, BR-10 원자로에서 각각 연소도 1.08 % 및 2.15 %까지 연소된 후, 조사 후 검사가 수행될 것이다. 금속핵연료는 대개 낮은 연소도에서 급격한 변화틀 보이기 때문에, 본 핵연료 노내조사시험 Program의 결과는 금속핵연료봉의 성능해석 모델 개발에 활용될 수 있을 것이다.

• Journal of the KSME
• /
• v.31 no.7
• /
• pp.652-656
• /
• 1991

일반적으로 로켓 추진기관이라고 하면 외부로부터의 산소 공급없이, 추진제라고 불리는 물질이 연소할 때 발생하는 고온 고압의 연소가스를 고속으로 노즐로 통과시켜 추력을 얻는기관을 말 한다. 연소는 산소와의 화합반응이 급격히 일어날 때 일어나는 현상이므로 외부로부터 산소공 급이 없다는 것은, 추진제 자체에서 산소공급이 가능하다는 것을 의미한다. 즉, 추진제는 그 자 체가 흔히 말하는 연료성분과 산소를 공급할 수 있는 산소화합물을 같이 묶어둔 물질이어야 한다. 그러나 지구를 둘러싸고 있는 대기에는 산소가 20%나 포함되어 있으며, 이 무궁무진한 산소를 이용하지 않는다는 것은 여러 면에서 손실임을 쉽게 알 수 있을 것이다. 그럼에도 불구 하고 이를 이용하지 못하고 있었음은 그 나름대로의 어려움이 있었기 때문일 것이다. 그러나 인간의 노력과 연구로 불가능했던 많은 사실도 가능하게 된 것이 헤아릴 수 없이 많아지고 있음 또한 주지의 사실이다. 로켓 추진기관 분야에서도 순수 연료 성분만을 로켓에 탑재하고 산소는 흡입되는 대기중의 것을 이용하자는 것이 새로운 연구분야로 각광을 얻고 있으며, 실제로 이러한 방법이 실용화되고 있다. 이와 같이 흡입공기를 산소원으로 하는 추진기관을 총칭 램제트 추진 기관이라고 한다.

• Proceedings of the KSCN Conference
• /
• 2004.05a
• /
• pp.380-391
• /
• 2004

급격한 산업과 기술의 발달은 중금속을 포함한 다양한 유해물질(예를 들면, 배기가스, 대기오염, 연소)로부터의 식품 오염을 초래하였고, 특히 식품은 그 자체 뿐 만 아니라 제조ㆍ가공, 조리과정 중에도 오염물질에 노출되어, 이들을 함유한 음식이 우리들의 식탁에 오르게 됨으로써 식품의 안전은 물론 궁극적으로 국민건강이 위협받기에 이르렀다.(중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.88-91
• /
• 2005

The combustion characteristics of high burning HTPB/AP solid propellants have been investigated by means of a closed bomb method of interval volume of 200 co and 700 cc at pressures from 1000 to 30,000 psi. The burning rate data measured by closed bomb are in good agreement with strand burner test results at pressure from 1000 to 5000 psi using disc sample of 1 mm thickness. The burning rate dat by using 200 cc closed bomb are in general agreement with that of 700 cc closed bomb. At pressure between $5,000\sim7,000$ psi, a market increase in pressure dependence of the linear burning rate occurs for HTPB/AP propellant.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.60-65
• /
• 2003

An experimental study was performed to understand ignition characteristics of gas turbine combustor with rotating fuel injection system. Liquid fuel applied to the inner surface of rotating fuel nozzle which was driven by high speed electrical motor is flung away by centrifugal forces. The real scale combustor and test rig was manufactured and tested under atmospheric condition in KARl combustion test facility. From the test results, this combustor ignition characteristics are highly dependent upon fuel nozzle rotating speed. Futhermore, combustor exit gas temperature was rapidly changed by increasing or decreasing the fuel nozzle rotating speed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.6
• /
• pp.9-17
• /
• 2007

This experimental study has been conducted to investigate the effect of the recirculation zone on the multi-slot film cooling in the ramjet combustor. The recirculation zone which is generated by the protrusion tip on the entrance of the coolant flow path affects on the first slot. Velocity fields, dimensionless temperature fields and adiabatic film cooling effectiveness on the downstream wall of the slot exit are measured. The results show that the film cooling performance is rapidly decreased after the slot exit by shear layer and high turbulence intensity between separated flows and coolant flows.