• Journal of Life Science
• /
• v.12 no.2
• /
• pp.129-135
• /
• 2002

Several kinds of thermophilic, aerobic microorganisms (Bacillus genus), metal leaching microorganisms (Thiobacillus, T. ferooxidans), and other nondegradable chemical-degrading microorganisms (Pseudomonas genus) were utilized to study the effect on composting livestock manure. Under the Carbon-Nitrogen ratio (C/N) of 35∼40 and water content of 50∼65% conditions, the composting in the cycling drum reactor showed slower composting and lower temperature increase than that of the manual reactor. Element analysis after composting indicated relatively high levels of mineral contents with the substitutional effect of chemical fertilizer. Metal analysis before and after composting showed lower As in all, Cr in pig, Pb in cow, Hg in chicken, and Cu in cow manure compost than the regulation values. Compost maturity was ascertained by the several maturity tests. Salmonella and E. cozi detection test by SS or EMB agar plate confirmed the safety from the pathogenic microorganisms. The results suggest that the inoculation of metal and some other chemical degrading microorganisms during composting might decrease metal contamination and increase composting rate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.19-19
• /
• 2007

Excimer laser annealing (ELA) 방법을 이용하여 결정화하고 게이트 절연체로써 high-k 물질을 가지는 다결정 실리콘박막 트랜지스터의 전기적 특성을 평가하였다. 다결정 실리콘 박막 트랜지스터는 비결정질 실리콘 박막 트랜지스터 보다 높은 전계 효과 이동도와 운전 용이한 장점을 가진다. 기존의 결정화 방법으로는 다결정 실리콘 박막 트랜지스터의 높은 열 공급을 피할 수 없기 때문에, 매몰 산화막 위의 비결정질 박막은 저온에서 다결정 실리콘 결정화를 위해 KrF excimer laser (248nm)를 이용하여 가열 냉각 공정을 했다. 게다가 케이트 절연체로써 atomic layer deposition (ALD) 방법에 의해 저온에서 20 nm의 고 유전율을 가지는 $HfO_2$ 박막을 증착하였다. 알루미늄은 n-MOS 박막 트랜지스터의 게이트 전극으로 사용되었다. 금속 케이트 전극을 사용하여 게이트 공핍 효과와 관계되는 케이트 절연막 두께의 증가를 예방할 수 있고, 게이트 저항의 감소에 의해 소자 속도를 증가 시킬 수 있다. 추가적으로, 비결정질 실리콘 박막의 결정화 기술로써 사용된 ELA 방법은 SPC (solid phase crystallization) 방법과 SLS (sequential lateral solidification) 방법에 의해 비교되었다. 결과적으로, ELA 방법에 의해 결정화된 다결정 실리콘 박막의 결정도와 표면 거칠기는 SPC와 SLS 방법에 비해 개선되었다. 또한, 우리는 ELA 결정화 방법에 의한 다결정 실리콘 박막 트랜지스터로부터 우수한 소자 특성을 얻었다.

• Applied Chemistry for Engineering
• /
• v.35 no.5
• /
• pp.361-371
• /
• 2024

This study reviews recent advancements in Ni-based catalysts for CO₂ methanation, emphasizing high thermal stability and catalytic performance at elevated temperatures. Ni catalysts are preferred for their strong hydrogen adsorption, high activity, and methane selectivity. Strategies such as optimizing metal loading, using efficient supports, and introducing promoters enhance thermal stability by preventing sintering and carbon deposition. The produced methane serves as a valuable feedstock for synthetic fuels and chemicals, improving the economic feasibility of the CO₂ methanation process. These findings underscore the importance of thermal stability in developing effective Ni catalysts for large-scale CO₂ methanation.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.803-810
• /
• 1998

We have studied the catalytic combustion of soot particulate over perovskite-type oxides prepared by malic acid method. The catalysts were modified to enhance the activity by substitution of metal into A or B site of perovskite oxide. In addition, the reaction conditions, such as temperature, $O_2$ concentration, space velocity have been studied. The effect of $SO_2$ pretreatment and water introduced into reactants were also examined. In the $LaCoO_3$ catalyst, the partial substitution of alkali metals into A site enhanced the catalytic activity in the combustion of soot particulate and the activity was shown in the order : Cs>K>Na; In the $La_{0.6}Cs_{0.4}CoO_3 $; catalyst, the substitution of Fe or Mn showed no effect on the ignition temperature. The ignition temperature decreased with increasing $O_2$ concentration and contact time. The introduction of water into reactants feed decreased the ignition temperature and the pretreatment of $SO_2$ showed no effect on the catalytic activity.

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.239-245
• /
• 1995

Mn-Zn ferrite thin films were deposited on $SiO_2(1000 \AA)/Si(100)$ by ion beam sputtering using a single ion source. A mosaic target consisting of a single crystal(ll0) Mn-Zn ferrite with a Fe metal strip on it was used. As-deposited films without oxygen gas flow have a wiistite structure due to oxygen deficiencies, which originated from the extra metal atoms sputtered from the metal strips during deposition. The as-deposited films with oxygen gas flow, however, have a spinel structure with (111) preferred orientation. The crystallization of thin films was maximized at the ion beam extraction voltage of 2.lkV, at which the deposited films are bombarded appropriately by the energetic secondary ions reflected from the target. As the extraction voltage increased or decreased from the optimum value, the crystallinity of thin films becomes poor owing to a weak and severe bombardment of the secondary ions, respectively. Crystallization due to the bombardment of the secondary ions was also maximized at the beam incidence angle of $55^{\circ}$. The as-deposited ferrite thin films with a spinel structure showed ferrimagnetism and had an in-plane magnetization easy axis.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.568-575
• /
• 1999

Two different digestion procedures for the simultaneous determination of major and platinum-group element(PGE) in spent automobile catalysts containing PGE and silicates by inductively coupled plasma atomic emission spectrometry(ICP-AES) are compared. Combinations of mixed aids using HF, $HNO_3$, HCl, $HClO_4$, $H_2O_2$, and $H_3BO_3$ are utilized for the hot plate dissolution method and the closed-vessel microwave digestion method, The latter method has been shown to be relatively superior in terms of recovery, analysis time, and amount of aqua regia (3 parts HCl + part $HNO_3$ required to dissolve PGE in comparison with conventional open vessel hot-plate dissolution. The best results were drawn from the following conditions: In closed Teflon PFA vessels under microwave heating with temperature/pressure regulation, a 0.25 g portion of sample was digested in 2 mL of HF, 2 mL of $HNO_3$ and 6mL of HCl under the pressure of 200 psi(13.79 bar) at $180^{\circ}C$ for 1hr, followed by a second digestion stage with 16 mL of 5%(w/v) boric acid under the pressure of 20 psi(1.38 bar) at $100^{\circ}C$ for 10 min. After the microwave heating, the sample was post-treated with 10 mL of aqua regia twice by hot-plate heating. This condition gives the PGE recovery within 85~110% and the relative standard deviations within 2%. The method developed can therefore be regarded as an alternative method for routine analysis of spent automobile catalysts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.80-87
• /
• 2018

In recent years, due to the spread of various renewable energy power sources and the pursuit of high efficiency and low-power consumption, not only trends in the electric power industry but also the consumption, control methods, and characteristics are diversified. However, in this diversified electric power industry, the fuse (which is the core part responsible for safety) has not developed significantly in classical operation mode, and thus, fires continue to occur. In this paper, the effects of low melting-point metal plating and high melting-point metal plating on operating characteristics and IT curve movement of the fuse are investigated in a cartridge fuse, which is a classic fuse manufacturing method. The effects of plating on the thickness of the fuse are investigated, and various operating characteristics of the fuse are implemented. In addition, it is suggested that the plating of the low melting-point metal moves the rated current line of the fuse to a low rating, and moves operating characteristics to characteristics of delay operation. It is possible to design various operating characteristics using this characteristic.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.55-61
• /
• 1969

This K-17 strain was not absolutely requiring xylose as an inducer for enzyme formations. The most activity of this enzyme was lost when treated at $75^{\circ}C$. for 30 hours but was not influenced at $70^{\circ}C$. for 70 hours of treatment. The activity of this enzyme was increased by the addition of magnesium ions or cobalt ions in the reaction system. In the studies, we found that the magnesium ions simply activate the enzyme reaction and the cobalt ions do not but protect the enzyme from heat inactvation. And it was also found the phosphate buffer solution was very suitable as glucose dissolving solvent on the enzyme reaction. The mixed carbon source medium containing glucose, fructose, sorbitol, xylose and sucrose was more favorable for enzyme production then a sole carbon source containing medium on the shaking culture method.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.289-301
• /
• 2021

When investigating old, printed documents, determining whether a work is printed on a woodblock or using a movable metal type is crucial. It is because the history of printing in Korea and across the world relies on determining the relevant printing invention used and the time of use of the movable metal type. Deciphering details from woodblock and metal prints requires various kinds of information regarding the imprint and the work's printing background, such as information on the characters in the printed document, the outline of the pages, the type of ink used, the production period of the ink, and the production period of the Korean paper. Analyzing such information can generally reveal the production period and the methods used on the old document. However, as such information is not documented systematically, relying on the researcher's judgment based on their experience and perception becomes inevitable. This study conducted an experimental investigation of the printing characteristics of woodblock prints using a replicated woodblock of the Wanpanbon edition of the Shimcheongjeon. Subsequently, the various phenomena and characteristics appearing on the woodblock prints were documented for future reference to determine the printing method of old documents. Finally, woodblock novels without an imprint may be used as a reference to estimate the printing dates by determining the degree of wear on the woodblock.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.126-132
• /
• 2022

Alkaline fuel cells using liquid fuels such as hydrazine and ammonia are gaining great attention as a clean and renewable energy solution possibly owing to advantages such as excellent energy density, simple structure, compact size in fuel container, and ease of storage and transportation. However, common shortcomings including cathode flooding, fuel crossover, side yield reactions, and fuel security and toxicity are still challenging issues. Real time monitoring of fuel concentrations integrated into a fuel cell device can help improving fuel cell performance via predicting any loss of fuels used at a cathode for efficient energy production. There have been extensive research efforts made on developing real-time sensing platforms for hydrazine and ammonia. Among these, recent advancements in electrochemical sensors offering high sensitivity and selectivity, easy fabrication, and fast monitoring capability for analysis of hydrazine and ammonia concentrations will be introduced. In particular, research trend on the integration of metallic and metal oxide nanoparticles and also their hybrids with carbon-based nanomaterials into electrochemical sensing platforms for improvement in sensitivity and selectivity will be highlighted.