• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.223-228
• /
• 1987

An efficient method for the calculation of wave forces on a tension leg platform(TLP) is presented in this paper. It is based on the Morison's equation with two corrective terms. One is the reduction of the inertia forces on the vertical columns in order to include the wave diffraction effect particularly for small wave conditions. The other is the inclusion of the hydrodynamic forces acting at the bottoms of the columns. Numerical studies are carried out for a TLP in 1000 ft water with two different wave heading angles($0^{\circ}$ and $45^{\circ}$). The reponse amplitude operators(RAO's) for the TLP motions and top tether tension variations are obtained by the present method and the theoretically more accurate method based on the diffraction theory. A comparison has been made between the results obtained by two methods.

• Journal of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.298-303
• /
• 1972

The adduct between phenylglyoxal and guanine was prepared. The structure of the adduct is similar to the glyoxal-guanine adduct. Aldehyde group of phenylglyoxal is added to 1-N of guanine base, and keto group is added to $N^2$ of guanine base. The structure of the adduct was determined by mass spectrometry, nuclear magnetic resonance spectroscopy and periodate oxidation. Periodate oxidation produced $N^2$-benzoyl-guanine from the adduct. On the basis of these results, ittvhas been assigned the structure I. The adduct is stable in alkaline solution: It does not dissociate into phenylglyoxal and guanine even after 2 hours heating at$60^{\circ}C$ at pH 12. The adduct is soluble in acidic ethanol, and is slightly soluble in neutral or alkaline water. It has a lower $A_{280}/A_{260}$ ratio at pH 1 compared to that of guanine.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.5
• /
• pp.421-428
• /
• 2009

In this study, an equivalent plate element model has been developed for an efficient vibration analysis of a biaxial hollow slab. To this end, equivalent mass and stiffness of equivalent plate element models corresponding to solid element models of example biaxial hollow slabs were calculated. To verify the efficiency and accuracy of the equivalent plate element models, structural analyses of example structures were performed. Analytical results showed that the natural frequencies of the equivalent plate element models were very close to those of the solid element models. Time history analyses of example biaxial hollow slabs subjected to walking load were conducted using the equivalent plate element models and the solid element models, and the results were compared. It could be seen based on the analytical results that the equivalent plate element model could provide very accurate results compared to the solid element model with significantly reduced analysis time.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.11
• /
• pp.973-982
• /
• 2007

In this paper, optimal design framework is developed by automatic mesh generation and PSO(Particle Swarm Optimization) algorithm based on parallel computing environment and applied to structural optimal design of satellite adapter module. By applying automatic mesh generation, it became possible to change the structural shape of adapter module. PSO algorithm was merged with parallel computing environment and for maximizing a computing performance, asynchronous PSO algorithm was developed and could reduce the computing time of optimization process. As constraint conditions, eigen-frequency and maximum stress was considered. Finally using optimal design framework, weight reduction of satellite adapter module is derived with satisfaction of structural safety.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.42-52
• /
• 1997

The basic principle of underwater ram-jet as a unique marine propulsion concept showing vary high cruise speed range(e. g. 80-100 knots) is the thrust production by the transfer of the potential energy of compressed gas to the operating liquid through kinetic mixing process. This paper is aimed to investigate the propulsive efficiency of the nozzle flow in underwater ram-jet at the speed of 80 knots for the buried type vessel. The basic assumption of the theoretical analysis is that mixture of water and air can be treated as incompressible gas. For an optimized nozzle configuration obtained from the performance analysis, preliminary data for performance evaluation are obtained and effects of nozzle inner wall friction, ambient temperature, ambient pressure, water density, gas velocity, bubble radius, flow velocity, diffuser area ratio, mass flow ratio and water velocity gradient are investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.292-292
• /
• 2012

현재 투명전극은 주로 ITO를 사용하고 있으며, ITO는 인듐산화물(In2O3)과 주석산화물(SnO2)이 9대 1의 비율로 혼합된 화합물로 인듐이 주성분이다. 따라서 ITO 사용량의 증가는 인듐의 수요 증가를 이끌어 2003년 이후 인듐 잉곳의 가격이 급등하였다. LCD에 응용되는 금속재료의 가격추이를 비교해보면, 인듐이 가장 큰 변화를 보이고 있으며, 2005년 인듐 가격은 2002년 대비 1,000% 이상 상승하였다가 2007년 이후 500%p 하락하여 2008년 2월 22일 기준으로 톤당 49만 달러에 거래되고 있다. 같은 기간 동안 알루미늄의 가격은 76.6% 상승하였으며 구리는 394%, 주석은 331% 상승하였다. 이러한 인듐의 가격 상승폭은 동일한 기간 동안 다른 금속 재료와 비해 매우 크며, 단위 질량당 가격도 20배 이상 높은 수준이다. ITO의 주성분인 인듐의 이러한 가격의 급등 및 향후 인듐의 Shortage 예상으로 인해 ITO 대체재 확보의 필요성이 증가되고 있다. 태양광 발전산업에서 현재 주류인 결정질 실리콘 태양전지의 변환효율은 꾸준히 향상되고 있으나, 태양전지의 가격이 매년 서서히 하강되고 있는 실정에서 결정질 실리콘 가격의 상승 등으로 고부가 가치 산업유지에 어려움이 있으며, 생산 원가를 낮출 수 있는 태양전지 제조기술로는 2세대 태양전지로 불리는 박막형이 현재의 대안으로 자리매김하고 있으며, 박막태양전지 산업분야가 현재의 정부정책 지원 없이 자생력을 갖추고 또한 시장 경쟁력을 확보하기 위해서는 박막태양전지 개발과 더불어 저가의 재료개발도 시급한 상황이다. 본 연구에서는 In-line magnetron sputtering system을 사용하여 소다라임 유리기판 위에 박막태양전지용 투명전도성 ZnO(Al) 박막을 제작하였고, 특히 이 박막은 n-형 반도체 특성을 가져야하기 때문에 홀이동도와 개리어농도의 상관관계 및 박막의 두께, 광투과율 특성, 온도 의존성을 조사하였고, 이를 논하고자 한다. (본 연구는 중소기업청의 기술혁신개발사업 연구지원금으로 이루어졌음).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.3
• /
• pp.137-151
• /
• 1991

The motion of two-dimensional floating breakwaters with rectangular clots-section which are moored tautly in shallow water has been analyzed using a velocity potential matching method in which the fluid region is devided into sub-regions and then unknown coefficients of velocity potentials are determined from the continuity condition of mass and momentum flux of fluid at imaginary boundaries between sub-regions. The method originally suggested by Ijima et al.(1972) for the motion of submerged body has been modified to analyze the motion of floating body. The total fluid region has been divided into three sub-regions : the incident wave region, the transmitted wave region and the region below the floating breakwater. The restoring forces induced by mooring lines which were ignored by Ijima et al.(1972) have been modeled as linear springs with the initial tension effects. This method has been verified through the comparions with results from hydraulic expriments. Applications to various conditions of floating breakwater have been performed.

• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.93-98
• /
• 2020

The subjects of this study were 10th grade students and 10 non-disabled students. For statistical programs, data were processed using SPSS Windows 25.0, and the statistical method used in the study was to calculate the mean and standard deviation of physical fitness factors and body mass index to determine the health and obesity of students with intellectual disabilities and non-disabled students. In addition, this study was conducted using the independent sample t-test to identify the differences in health fitness and obesity between intellectually and non-disabled students. The statistical significance level of the study was set at p <.05, and the results of the study showed that there were statistically significant differences in cardiopulmonary endurance, flexibility, muscle strength, muscle endurance, and responsiveness between middle and high school students with intellectual disabilities and non-disabled students. In the case of obesity, intellectually and non-disabled students were significantly different.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.8
• /
• pp.49-60
• /
• 2020

A fully coupled thermo-hydro-mechanical model is established to evaluate frost heave behaviour of saturated frost-susceptible soils. The method is based on mass conservation, energy conservation, and force equilibrium equations, which are fully coupled with each other. These equations consider various physical phenomena during one-dimensional soil freezing such as latent heat of phase change, thermal conductivity changes, pore water migration, and the accompanying mechanical deformation. Using the thermo-hydro-mechanical model, a sensitivity analysis study is conducted to examine the effects of the geotechnical parameters and external conditions on the amount of frost heave and frost heaving rate. According to the results of the sensitivity analysis, initial void ratio significantly affects each objective as an individual parameter, whereas soil particle thermal conductivity and temperature gradient affect frost heave behaviour to a greater degree when applied simultaneously. The factors considered in this study are the main factors affecting the frost heaving amount and rate, which may be used to determine the frostbite sensitivity of a new sample.

• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1084-1090
• /
• 2000

(Bi$_2$O$_2$)$^{2+}$층 사이에 두 개의 Ta-O 팔면체로 연결된 Bi 계의 층상 페로브스카이트 구조인 SrBi$_2$Ta$_2$O$_{9}$ (SBT) 박막을 XPS를 이용하여 깊이별 화학 상태 변화를 분석하였다. 아르곤 이온으로 SBT 박막을 식각하면, SBT 박막의 각 구성물들은 가속 Ar$^{+}$ 이온의 에너지에 따라 변화한다. SBT 각 구성물 중 Sr 3d의 화학 상태는 Ar$^{+}$ 이온의 에너지변화에 따라 근소하게 변화한다. 반면에, Ta 4f와 Bi 4f의 화학 상태 변화는 인가되는 Ar$^{+}$ 이온 에너지에 확실하게 의존한다. 특히, Bi 4f는 Sr과 Ta에 비해 낮은 Ar$^{+}$ 이온 에너지에서도 Bi-O의 화학 상태가 금속 Bi 화학 상태로 현저하게 변화한다. 이러한 SBT 박막의 화학 상태 변화는 산호 원자의 선택적인 식각 때문에 발생하며 선택적인 식각은 SBT 박막 내에서 각 구성물과 산소간의 질량 차이와 각 구성물의 열적 안정성에 의존함을 알 수 있다.