• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.269-272
• /
• 2011

일반적으로 지능형 에이전트에게 요구되는 가장 기초적인 상황 인식 기능 중의 하나가 불확실한 센서 데이터에 의존하여 자신의 현재 위치가 어디인지를 파악하는 일이다. 본 논문에서는 대표적인 확률기반의 측위 기법인 파티클 필터를 실제 로봇 측위에 적용한 실험을 수행하고, 이를 통해 측위 성능을 개선시킬 수 있는 방법들을 찾아본다. 특히 로봇 동작의 오차를 고려하지 않은 비-잡음 상태 전이 모델과 로봇 동작의 오차를 고려한 잡음 모델간의 비교 실험을 통해, 불확실성이 높은 실제 로봇 동작에 보다 근사한 상태 전이 모델이 파티클 필터 측위의 성능 개선에 도움이 될 수 있는지 분석해본다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.05a
• /
• pp.164-167
• /
• 2006

본 논문에서는 불확실한 비선형 시스템에 대한 적응 퍼지 슬라이딩 모드 제어기를 설계한다. 불확실한 비선형 시스템에서 발생할 수 있는 파라미터의 변화를 대처하기 위해서 적응 퍼지 이론을 이용하였고, 외란으로 인한 불확실성을 슬라이딩 모드의 제어기를 통해서 해결하였다. 또한 퍼지 튜닝을 통해 슬라이딩 조건을 가변화함으로써 기존의 슬라이딩 모드 제어기에 비해 빠르고 정확하게 추종 가능하도록 제어기의 성능을 향상시킨다. 제안하는 제어기는 정확한 동역학 모델의 구현이 어렵고 복잡한 비선형 시스템에 외란 특성이 우수한 슬라이딩 모드와 실제 시스템을 표현하는 범용 근사자로 유용성이 입증된 퍼지 시스템을 이용하여 간단하고 쉽게 제어할 수 있도록 하였다. Lyapunov이론을 통하여 전역적인 안정화를 보이며, 마지막으로 역진자 시스템에 적용하여 제안된 제어기의 성능을 검증한다.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2002-2004
• /
• 2003

본 논문에서는 시스템의 모델 불확실성과 백색 가우시안이 아닌 $L_2$ 잡음이 존재하는 경우에 시스템 상태변수의 효과적인 추정을 위한 강인 필터를 제안한다. 제안된 필터는 적분이차제약조건(integral quadratic constraint)을 갖는 일반적인 비선형 불확실 시스템을 위해 선형근사화를 통하여 구성된다. 또한 제안된 필터의 중요한 특성인 변형된 $H{\infty}$ 성능 지수를 유도하고, 해석적 방법을 통해 제안된 필터의 잡음과 시스템 파라미터 불확실성에 대한 강인성을 분석하며, 시뮬레이션 결과를 통하여 제안된 필터가 추정치의 정확도를 효과적으로 향상시키는 것을 보인다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.11
• /
• pp.990-998
• /
• 2007

Adaptive output feedback control technique using Neural Networks(NN) is proposed for uncertain nonlinear Multi-Input Multi-Output(MIMO) systems. Modified Dynamic Inversion Model(MDIM) is introduced to decouple uncertain nonlinearities from inversion-based control input. MDIM consists of approximated dynamic inversion model and inversion model error. One NN is applied to compensate the MDIM of the system. The output of the NN augments the tracking controller which is based upon a filtered error approximation with online weight adaptation laws which are derived from Lyapunov's direct method to guarantee tracking performance and ultimate boundedness. Several numerical results are illustrated in the simulation of Van der Pol system and unmanned helicopter with model uncertainties.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.1
• /
• pp.23-34
• /
• 1991

This paper is studied for the recognition of occluded objects by fuzzy inference. The images are transformed a group of linear line segments, which is formed local features extracted from curvature points, using polygonal approximation. The features extracted from images are representes to the fuzzified data which is mapped into fuzzy concepts to represent the fuzziness, and the recognition of a model from scenes is performed by fuzzy inference using the production rulse which is generated from the model image. It is considered that the recognition results according to the change of degree of fuzziness in the experiments, and the experimental results for 30 scenes contained 120 models is obtained 92.5% of recognition rate.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.2
• /
• pp.138-143
• /
• 2006

This paper presents intelligent digital redesign method for hybrid state space fuzzy-model-based controllers. For effectiveness and stabilization of continuous-time uncertain nonlinear systems under discrete-time controller, Takagi-Sugeno(TS) fuzzy model is used to represent the complex system. And global approach design problems viewed as a convex optimization problem that we minimize the error of the norm bounds between nonlinearly interpolated linear operators to be matched. Also, by using the bilinear and inverse bilinear approximation method, we analyzed nonlinear system's uncertain parts more precisely. When a sampling period is sufficiently small, the conversion of a continuous-time structured uncertain nonlinear system to an equivalent discrete-time system have proper reason. Sufficiently conditions for the global state-matching of the digitally controlled system are formulated in terms of linear matrix inequalities (LMIs). Finally, a TS fuzzy model for the chaotic Lorentz system is used as an . example to guarantee the stability and effectiveness of the proposed method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.336-345
• /
• 2012

In crack growth life, uncertainties are caused by variance of geometry, applied loads and material properties. Therefore, the reliability estimation for these uncertainties is required to keep the robustness of calculated life. The stress intensity factors are the most important variable in crack growth life calculation, but its equation is hard to know for complex geometry, therefore they are processed by the finite element analysis which takes long time. In this paper, the response surface is considered to increase efficiency of the reliability analysis for crack growth life of a turbine wheel. The approximation model of the stress intensity factors is obtained by the regression analysis for FEA data and the response surface of crack growth life is generated for selected factors. The reliability analysis is operated by the Monte Carlo Simulation for the response surface. The results indicate that the response surface could reduce computations that need for reliability analysis for the turbine wheel, which is hard to derive stress intensity factor equation, successfully.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.4 s.65
• /
• pp.413-422
• /
• 2003

Most engineers tend to rely on their intuition or existing data in formulating structural design or preliminary estimate of various conditions. Because of these variations, the artificial neural network is used as an alternative design model of the warren truss since it can handle uncertainty through the probability method. This research validated the approximate structural design model of the warren truss, with its proper parameter values of the neural network and design process falling within 10 percent torrence of the different designs that resulted between this model and the MIDAS program. The suggested model for the process was adapted for the truss design using the member section table, while time saving and efficiency are based on the allowed range of torrence.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.870-875
• /
• 2004

Current trend of design technologies shows engineers to objectify or automate the given decision-making process. The numerical optimization is an example of such technologies. However, in numerical optimization, the uncertainties are uncontrollable to efficiently objectify or automate the process. To better manage these uncertainties, Taguchi method, reliability-based optimization and robust optimization are being used. To obtain the target performance with the maximum robustness is the main functional requirement of a mechanical system. In this research, the robust design strategy is developed based on the DACE and the global optimization approaches. The DACE modeling, known as the one of Kriging interpolation, is introduced to obtain the surrogate approximation model of the system. The robustness is determined by the DACE model to reduce the real function calculations. The simulated annealing algorithm of global optimization methods is adopted to determine the global robust design of a surrogated model. The mathematical problems and the MEMS design problem are investigated to show the validity of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1597-1600
• /
• 2010

In this paper, a direct controller for nonlinear plants using a neural network is presented. The composed of the control input by using RBF neural networks and auxiliary input to compensate for effects of the approximation errors and disturbances. In the results, using this scheme, the output tracking error between the plant and the reference model can asymptotically converge to zero in the presence of bounded disturbances and approximation errors. Simulation results show that it is very effective and can realize a satisfactory control of the nonlinear system.