• Journal of Convergence for Information Technology
• /
• v.12 no.4
• /
• pp.119-125
• /
• 2022

In the study, we endeavored to investigate the effect of phenylephrine, isoprenaline and prazosin on the tissue-specific vascular contractility and to determine the mechanism involved. There were few reports addressing the question whether thin or thick filament modulation is included in phenylephrine, isoprenaline and prazosin-induced regulation. We hypothesized that isoprenaline and prazosin play a role in tissue-dependent regulation of vascular contractility. Denuded arterial muscles of Sprague-Dawley male rats were suspended in organ baths and isometric tensions were transduced and recorded using isometric transducers and an automatic data acquisition system. Interestingly, sustained continuous contraction of thoracic and abdominal aorta. Furthermore, isoprenaline and prazosin together with phenylephrine inhibited transiently and persistently vasoconstriction of thoracic and abdominal aorta suggesting that additional mechanisms (e.g. decreased receptor density, chemical interaction, postreceptor signaling or distribution of agonists) might be included in the modulation of vascular contractility.

• Journal of the Korean Vacuum Society
• /
• v.16 no.3
• /
• pp.172-180
• /
• 2007

A new diagnostics of plasma electron temperature and plasma density is introduced with the observation of the light emission along the tube of external electrode fluorescent lamps. With two different methods operating an external electrode fluorescent lamp of outer diameter 4.0 mm and length 860 mm for the back-light source of 37-inch LCD-TVs, the lighting modes and the plasma properties are investigated. In the center balance operation, the light-emission propagates simultaneously from both sides of the high voltage electrodes to the center of the lamp, while in conventional operation the light-emission propagates from the one end of a high voltage to the other ground electrode. In the operation value of luminance $10,000{\sim}15,000cd/m^2$, the electron plasma thermal energy $(kT_e)$ is about $1.3{\sim}2.7eV$ with the electron density $(n_e)$ is about $(1.6{\sim}3.6){\times}10^{16}m^{-3}$.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.3
• /
• pp.105-118
• /
• 2005

This study examined the improvements of existing food waste statistics system using a sample survey, which estimated the total food waste generation in 4 areas(High, Middle, Middle and Low, and Low population density), and a survey, which was aimed at forming a basis for modeling 112 local governments, were conducted. Currently, the methods for collecting the statistical data are summarized as five types. In high population density areas, the type based on examining the recycling facilities was found to be a more general way of estimating population centers higher than low population density areas. It was found that numerous low population density areas estimated their food waste production according to its generation per capita. It was also found that the findings of sample survey were 10%~40% higher than the existing statistical data and Non-separated collected food waste appears to be the main factor.

• Journal of Sensor Science and Technology
• /
• v.1 no.1
• /
• pp.23-34
• /
• 1992

In order to fabricate magnetoresistive sensor, Fe-Ni and Co-Ni alleys were evaporated on the slide glass and the silicon wafers. Saturation magnetic induction($B_{s}$), coercive field strength($H_{c}$) and magnetoresistance were measured for fabricated samples. The evaporated Fe-Ni thin films show that the saturation magnetic induction was 0.65 T, and coercive field strength was 0.379 A/cm, and this value was changed to 0.370 A/cm(//), 0.390 A/cm(${\bot}$), respectively after magnetic annealing. For the measurement of coercive field strength, magnetizing frequency of 1 kHz was used. For the fabricated sensor element, the change of magnetoresistance (${\Delta}R/R$) was excessively unstable due to oxidation in the process of fabrication. The evaporated Co-Ni alloy thin films show that saturation magnetic induction was 0.66 T, and coercive field strengthes were 5.895 A/cm(//), 5.898 A/cm(${\bot}$), respectively, after magnetic annelaing. The change of magnetoresistance(${\Delta}R/R$) was $3.6{\sim}3.7%$ of which value was excessively stable to room temperature. Fe-Ni thin film could have many problems due to large affinity in the process of fabrication of magnetoresistance sensor, but Co-Ni thin film could be a suitable material for fabrication of magnetoresistance sensor, because of its small affinity and definite magnetoresistance effects.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.187-187
• /
• 1999

fcc(110) 표면이나 bcc(110) 표면과 같이 2-fold 대칭성을 갖는 표면 위에 초미세 박막을 성장시킬 경우 토대표면의 두 방향에 대한 비 대칭성으로 흡착물이 비대칭적인 cluster 형태로 성장되는 것이 보고되고 있다. 최근 STM에 의한 Ps(110) 표면 위에나 Si(100) 또는 W(110) 표면 위에 성장 실험은 흡착물이 길게 늘어선 한 줄 형태의 성장 또는 가로 세로가 비대칭적인 cluster 형태로 성장되는 것을 보고하고 있고, 이러한 특정 형태의 성장의 원인으로 흡착 원자의 방향에 따른 분산 속도의 비대칭성, 인접 원자와의 비대칭적인 상호작용, 또는 cluster 경계 방향의 분산 속도 등을 들고 있다. 그러나 아직 대부분의 물질계에 비해 흡착원자의 분산속도 또는 분산 장벽에 대해서는 잘 알려져 있지 않다. 원하는 원자 단위 구조물 제작을 위해서는 흡착물의 분산속도에 대한 이해가 필수적이며, 본 연구는 KMC 시뮬레이션과 실험 결과를 비교하는 방법을 통하여 위치와 조건에 따른 각각의 분산 속도를 구하고자 하는 시도이다. 특히 비대칭적 토대 위에서의 나타나는 다양한 형태의 미시적 성장구조에 관심을 가지며, 연구 방법으로는 KMC 시뮬레이션을 이용한다. 미시적 성장 양식은 분산 장벽 형태에 의해 크게 결정된다. 분산장벽 중에서 성장에 비교적 큰 영향을 미치는 것으로는 테라스 위의 원자가 이동할 때의 분산장벽인 Ed, 계단 끝에 부착된 원자가 분리될 때의 장벽인 Ep, 그리고 위 테라스에서 계단 아래로 떨어져 내려갈 때 만나는 Schwoebel 장벽들이 있다. 먼저 대칭적인 fcc(100) 표면 위에서의 성장 구조를 정리해보면 분산 장벽에 따라 다양한 미시적 성장형태를 볼 수 있었다. 다층 성장의 경우도 그 양식은 sub-ML 성장과 동일한 형태를 가지므로 sub-ML 성장구조로 전체 성장 양식을 예견할 수 있다. 일반적인 경향은 Ep가 커질수록 fractal 성장형태가 되며, Ed가 적을수록 cluster 밀도가 작아지나, 같은 Ed+Ep에 대해서는 동일한 크기의 팔 넓이(수평 수직 방향 cluster 두께)를 가진다. 따라서 실험으로부터 얻은 cluster의 팔 넓이로부터 Ed+Ep 값을 결정할 수 있고, cluster 밀도와 fractal 차원으로부터 각각 Ed와 Ep값을 분리하여 얻을 수 있다. 또한 다층 성장에 대한 거칠기(roughness) 값으로부터 Es값도 구할 수 있다. 양방향 대칭성을 갖지 않은 fcc(110) 표면과 같은 경우, 형태는 다양하지만 동일한 방법으로 추정이 가능하다. (110) 표면의 경우 nearest neighbor 원자가 한 축으로 형성되고 따라서 이 축과 이것과 수직인 축에 대한 상호작용이나 분산 장벽 모두가 비대칭적이다. 따라서 분산 장벽도 x-축, y-축 방향에 따라 분리하여 Edx, E요, Epx, Epy 등과 같이 방향에 따라 다르게 고려해야 한다. 이러한 비대칭적인 분산 장벽을 고려하여 KMC 시뮬레이션을 수행하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인 모양을 가지는 성장의 경우도 cluster 밀도, cluster 모양, cluster의 양 축 방향 길이 비, 양 축 방향의 평균 팔 넓이로부터 각 축 방향의 분산 장벽을 얻어낼 수 있을 것으로 보인다.

• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.687-702
• /
• 2012

The objective of this study was to determine crop rotation effects on potato yield, soil chemical and microbiological properties from a short-term field experiment from 2010 to 2011 in Jeju Island, Korea. Potato cropping systems included continuous and rotation sequences of soybean (Glycine max(L.) Merr.), barley (Hordeum vulgare var. hexastichon), rapeseed (Brassica napus L.) and broccoli (Brassica oleracea var. italica). Crop rotations increased the yields of potato from 31% to 52% compared with continuous potato. Marketable yield of potato was highest under soybean plus rapeseed rotation by $20.97MT\;ha^{-1}$ and lowest under continuous cropping by $11.95MT\;ha^{-1}$. The incidence and severity of scab disease was significantly lower in tubers from crop rotation with soybean plus barley. Differences in marketable tuber yields among rotations were associated with potato scab disease. Especially, incidence and severity of potato scab were strongly correlated with soil pH, exchangeable calcium, and bacteria population of the soil. Crop rotations significantly increased soil pH, available phosphate, exchangeable K and Ca, especially in crop rotations with soybean plus barley or rapeseed. Soil microbial biomass C of crop rotations with soybean plus barley or rapeseed, was also significantly higher compared with monoculture. In conclusion, crop rotation may decrease the incidence of soil-born pathogen by increasing soil chemical properties and soil microbial biomass. Overall, potato crop productivity was generally maintained in rotations that contained soybean plus barley or rapeseed but declined under continuous cropping system.

• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1187-1198
• /
• 2008

Many reservoirs in Korea and their downstream environments are under increased pressure for water utilization and ecosystem management from longer discharge of turbid flood runoff compared to a natural river system. Turbidity($C_T$) is an indirect measurement of water 'cloudiness' and has been widely used as an important indicator of water quality and environmental "health". However, $C_T$ modeling studies have been rare due to lack of experimental data that are necessary for model validation. The objective of this study is to validate a coupled three-dimensional(3D) hydrodynamic and particle dynamics model (ELCOM-CAEDYM) for the simulation of turbid density flows in stratified Daecheong Reservoir using extensive field data. Three different groups of suspended solids (SS) classified by the particle size were used as model state variables, and their site-specific SS-$C_T$ relationships were used for the conversion between field measurements ($C_T$) and state variables (SS). The simulation results were validated by comparing vertical profiles of temperature and turbidity measured at monitoring stations of Haenam(R3) and Dam(R4) in 2004. The model showed good performance in reproducing the reservoir thermal structure and propagation of stream density flow, and the magnitude and distribution of turbidity in the reservoir were consistent with the field data. The 3D model and turbidity modeling framework suggested in this study can be used as a supportive tool for the best management of turbidity flow in other reservoirs that have similar turbidity problems.

• Korean journal of applied entomology
• /
• v.51 no.1
• /
• pp.67-72
• /
• 2012

This study was conducted to evaluate the scouting methods for larva and adults of the alfalfa weevil, $Hypera$ $postica$ Gyllenhal on Chinese milkvetch, $Astragalus$ $sinicus$ L. in the field. Three sampling methods, shake-bucket, shake-picking, and a sweeping net were evaluated for collecting alfalfa weevil larvae. We found significant differences among scouting methods and date in all survey fields. Sweep-net sampling was less able to detect small larvae than large larvae, which were not detected until early April whereas the shake-bucket, and shake-picking methods efficiently collected larvae from middle March. A Pitfall trap with three different baits - no bait, kidney bean seeds and sprouting kidney beans were compared for collection efficiency of alfalfa weevil adults. Collection efficiencies were significantly different by bait(p<0.018). Traps baited with sprouting kidney beans were the most efficient for collecting the alfalfa weevil. The number of alfalfa weevil caught was not significantly different between kidney bean seed and no bait in the pitfall trap. Therefore, the shake-bucket method for larvae and a pitfall trap baited with sprouting kidney beans for adults are recommended for scouting of the alfalfa weevil in a Chinese milkvetch field.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.383-388
• /
• 2019

The present study evaluated experimentally the effects of the type and content of plastic fine aggregates on cement mortar in order to utilize waste platics as raw materials of concrete. The two kinds of plastics, LLDPE and HDPE were used, and the mixing rate of plastic fine aggregates was increased 0, 25, 50, 75, 100%. The mortar of LLDPE fine aggregate and HDPE fine aggregate showed similar tendency in flow and material separation resistance, density and water absorption, compressive strength and flexural strength by age. The flowability of mortar mixed with plastic fine aggregates was increased up to 50% but decreased at 75% or more. The material separation resistance of mortar with plastic fine aggregates was also dramatically decreased. On the other hand, due to the low density of plastics, the density of mortar decreased with the mixing of plastic fine aggregates. Due to the low adhesion between plastic fine aggregates and cement, the compressive strength by age was decreased in proportion to the mixing ratio of plastic aggregate, but the flexural strength of each age decreased with maintaining a certain level at 50% or more of plastic fine aggregate content.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.175-175
• /
• 2010

이전 연구에서는 사파이어 기판 위에 이종에피성장 방법으로 성장한 높은 인듐 조성의 극박 InGaN/GaN 다층 양자우물 구조를 이용한 근 자외선 (near-UV) 영역의 광원에 대하여 보고하였다. 본 연구에서는 HVPE (Hydride Vapor Phase Epitaxy) 법을 이용하여 성장된 free-standing GaN 기판 위에 유기금속 화학증착법 (MOCVD) 을 이용하여 GaN 동종에피박막과 높은 인듐 조성의 InGaN/GaN 다층 양자우물을 성장하였고 그 특성을 분석하였다. Free-standing GaN 기판은 표면 조도가 0.2 nm 인 평탄한 표면을 가지며 $10^7/cm^2$ 이하의 낮은 관통전위밀도를 가진다. Freestanding GaN 기판 위에 성장 온도와 V/III 비율을 조절하여 GaN 동종에피박막을 성장하였다. 또한 100 nm 두께의 동종 GaN 박막을 성장한 후에 활성층으로 이용될 높은 인듐 조성의 InGaN/GaN 다층 양자우물구조를 성장하였다. Free-standing GaN 기판 위에 성장된 GaN 동종에피박막과 다층 양자우물구조의 표면 형상은 주사 탐침 현미경 (scanning probe microscopy, SPM) 을 이용하여 관찰하였고 photoluminescence (PL) 측정과 cathodoluminescence (CL) 측정을 통하여 광학적 특성을 확인하였다. 사파이어 기판 위에 성장된 2 um 의 GaN을 이용하여 성장된 높은 인듐 조성의 InGaN/GaN 다층 양자우물의 결함밀도는 $2.5 \times 10^9/cm^2$ 이지만 동일한 다층 양자우물구조가 free-standing GaN 기판 위에 성장되었을 경우 결함 밀도는 $2.5\;{\times}\;10^8/cm^2$로 감소하였다. Free-standing GaN 기판의 관통전위 밀도가 $10^7/cm^2$ 이하로 낮기 때문에 free-standing GaN 기판에 성장된 높은 인듐 조성의 다층 양자우물구조의 결함밀도가 GaN/sapphire 에 성장된 다층 양자우물의 결함밀도 보다 감소했음을 알 수 있다. Free-standing GaN 기판에 성장된 다층 양자 우물은 성장온도에 따라 380 nm 에서 420 nm 영역의 발광을 보이며 PL 강도도 GaN/sapphire 에 성장한 다층 양자우물의 PL 강도 보다 높은 것을 확인할 수 있다. 이것은 free-standing GaN 기판에 성장된 높은 인듐 조성의 InGaN/GaN 다층 양자우물구조의 낮은 결함밀도로 인하여 활성층의 발광 효율이 개선된 것임을 보여준다.