• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.249-256
• /
• 2000

In order to investigate the effectiveness of methanol, which has high latent heat of evaporation and oxygen contents, for DI diesel engine performance and exhaust emission, the methanol was injected at the suction port of DI diesel engine. The injector used for test was conventional gasoline engine injector and controlled the quantity of methanol per cycle by the power supply controller which designed specially for injector. The results shown that the maximum pressure point was delayed, the value of maximum pressure was decreased, and the concentrations of both NOx and Soot were decreased, as the methanol injection quantity increased, and also the thermal efficiency of engine injected methanol under the high load condition was similar to no methanol injection but under the medium load condition was decreased within the experimental conditions.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.151-155
• /
• 2005

Three-dimensional structures of unsteady detonation wave propagating through a square-shaped tube is studied using computational method and parallel processing. Inviscid fluid dynamics equations coupled with variable-${\gamma}$ formulation and simplified one-step Arrhenius chemical reaction model were analysed by a MUSCL-type TVD scheme and four stage Runge-Kutta time integration. Results in three dimension show the two unsteady detonation wave propagating mode, the Rectangular and diagonal mode of detonation wave instabilities. Two different modes of instability showed the same cell length but different cell width and the geometric similarities in smoked-foil record.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.15-19
• /
• 2005

Three-dimensional structures of unsteady detonation wave propagating through a square-shaped tube is studied using computational method and parallel processing. Inviscid fluid dynamics equations coupled with variable-${\gamma}$ formulation and simplified one-step Arrhenius chemical reaction model were analysed by a MUSCL-type TVD scheme and four stage Runge-Kutta time integration. Results in three dimension show the two unsteady detonation wave propagating mode, the Rectangular and diagonal mode of detonation wave instabilities. Two different modes of instability showed the same cell length but different cell width and the geometric similarities in smoked-foil record.

• The Bimonthly Magazine for Agrochemicals and Plant Protection
• /
• v.7 no.3
• /
• pp.81-91
• /
• 1986

진딧물은 아주 작고 연약하여 조그마한 힘을 가해도 곧 터져버릴 것 같은 곤충이지만, 일생을 통하여 5가지 형태로 까지 변화할 수 있어 불량환경에 적응할 수 있는 힘은 그 어느 곤충보다도 크다고 하겠다. 처녀생식으로 번식하므로 번식력 또한 대단하여 그 숫자가 단시일내에 크게 불어나는 해충이다. 과수 재배시에 진딧물의 피해양상은 과수의 영양분을 흡즙하고, 감로를 분비하여 그을음병을 유발시키며, 잎을 오그라뜨리거나 뒤쪽으로 말리게하여 잎의 기능을 억제시킴으로써 과수의 생육을 지연시키고 묘목의 경우에 심할 때는 고사(枯死)까지 한다. 또한 최근에는 약제방제시에 약제선택성이 강한 종들이 나타나고 있는 실정이므로 진딧물의 효과적인 방제를 위해서는 무엇보다도 먼저 진딧물의 종류에 따른 생태를 잘 알고 그에 따른 합리적인 방제대책을 수립하여야 할 것으로 생각된다. 이에 필자는 그동안의 연구에서 얻어진 결과를 토대로 과수가해 주요 진딧물의 생태와 방제법을 소개하는 것이며 이 조그마한 자료가 진딧물에 얽힌 문제점들을 해결하는데 조금이나마 도움이 되었으면 한다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.341-342
• /
• 2008

A conductivity of soot at microwave frequency is presented using a novel technique for complex permittivity of materials. The method overcomes limitations of conventional methods which are cavity perturbation and transmission/reflection method. Resonant frequencies and Q factors are measured and simulated for the cylindrical cavity, and they are compared to each other. Similar material property of both real material and simulation material produce similar values of resonant frequency and Q factor. The complex permittivity of material can be determined by simulating the cavity to change material property until the simulation results are nearly the same as the measurement results. Cylindrical cavity has been realized for measurement at 880 MHz, and conductivity of soot is measured. A sample was made by depositing the soot on the glass. The proposed method shows that the conductivity of soot is 11 S/m.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.9
• /
• pp.3007-3014
• /
• 1996

The instantaneous flame temperature and soot formation and oxidation in a D.I. diesel engine are measured using a two-color method. The proposed method based on the continuous spectral radiation from the soot particles in the flame is applicable to industrial diesel engines without major modifications of their main characteristics. Measurements are performed at one location inside the combustion chamber of a D.I. diesel engine. Effects of different engine speeds and loads on flame temperature and KL factor which is an index of soot concentration were examined. Little temperature change were observed with increasing rpm, while increased with loads. The higher the flame temperature is, the lower the KL factor is.

• Journal of the Korean Society of Combustion
• /
• v.7 no.2
• /
• pp.24-33
• /
• 2002

The morphology of deposits on $15-{\mu}m$ thin SiC filaments has been investigated with SEM in a co-flowing, propane/air laminar diffusion flame. The average size of mature soot particles deposited in the luminous flame edge is strongly dependent on their axial position in a typical heavily sooting flame. The surface growth of liquid-phase PAHs molecules and the transition to soots from fully-developed precursors could be observed in the radial deposition of the flame. Two sooting regimes were found: one is the transition from the condensed-phase precursors; the other is the aggregation of smaller soot particles (or chains of them) to be carried along particle path lines. In the high temperature flame edge outside the soot luminous flame surface, the very thin fiber-like structures, which are about 10 nm thick, were found.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.173-182
• /
• 1997

The instantaneous flame temperature and soot formation and oxidation in a D. I. diesel engine are measured by using a two-color method. The proposed method based on the continuous spectral radiation from the soot particles in flames is applicable to industrial diesel engines without major modifications of their main characteristics. Measurements are performed at one location inside the combustion chamber of a D.I. diesel engine. Effects of different engine speeds and loads on flame temperature and KL factor which is an index of soot concentrations were examined. A little temperature change were observed with increasing engine speed, while increased with loads. The higher the flame temperature is, the lower the KL factor is.

• The Korean Journal of Mycology
• /
• v.41 no.4
• /
• pp.212-217
• /
• 2013

Unusual mushrooms were observed in the greenhouses of vegetables Chinese chive, cucumber, melon and Korean dandelion in four locations of Korea in 2012. The mushrooms usually grew with the vegetables cultivated on beds in the greenhouses. Occurrence aspects of the mushrooms in the greenhouses and effect of the mushrooms on growth and quality of the vegetables were investigated. Mushroom samples were collected from the beds in the greenhouses and identified based on their morphological characteristics. The mushroom samples collected from the greenhouse of Chinese chive were identified as Coprinus aokii, those from the greenhouse of cucumber as Cristinia eichleri and Coprinus sp., those from the greenhouse of melon as Leucocoprinus cretaceous, Panaeolus fimicola and Conocybe sp., and those from the greenhouse of Korean dandelion as Conocybe rickenii f. tetrasporique. Out of the seven mushrooms identified, L. cretaceus, C. rickenii and C. eichleri were first found in Korea. The investigation results revealed that the mushrooms were originated from compost or soil used in the beds, and showed that C. aokii caused sooty mold on leaves of Chinese chive, and C. rickenii f. tetrasporique hindered growth of Korean dandelion and caused sooty mold on leaves of the plant. The other mushrooms had no effect on growth and quality of the vegetables.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2009.12a
• /
• pp.45-56
• /
• 2009

Current status on the occurrence and the management of the major disease, insect and mite pests were investigated in the organic or non-chemical pest control orchards from 2005 to 2009. Numbers of certified organic or non-chemical apple orchards were increased from 14 in 2005 to 78 in 2008. Severe damages on leaves and fruits occurred by the several diseases such as marssonina blotch, bitter rot, white rot, sooty blotch and flyspeck, and the several insect pests such as apple leaf-curling aphid, woolly apple aphid, oriental fruit moth and peach fruit moth on the almost certified organic or non-chemical pest control orchards. About 10 and 18 environmental-friendly materials were used to control diseases and insect or mite pests respectively. But, lime sulfur and bordeaux mixture to diseases and machine oil, plant oil mixed with egg yolk, and pheromone mating disruptions to insect pests were effective to control under the adequate conditions. At present, it is extremely difficult to produce organic apples in Korea. Growers must consider about and solve so many conditions on the cultivar, weather, local site, marketing and so on, before when they decide to change from conventional or IPM(Integrated Pest Management) to organic or non-chemical pest control orchards.