• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1669-1675
• /
• 2005

Recently, the small sized wireless terminals have problems of processing of large sized file because of the trends of a small sized terminals and a large sized files. Moreover, the web servers or the file servers have problems of the overload because of the concentration with many number of files to the them. Also, There is a security vulnerability of the data processing caused by the processing with a unit of the independent file. To resolve the problems, this paper proposes a new scheme of fat splining distribution using the P2P networks with the mesh topology. The proposed scheme is to distribute blocks of file into any peer of P2P networks. It can do that the small sized wireless terminals can process the large size file, the overload problems of a web or file servers can solve because of the decentralized files, and, the security vulnerability of the data processing is mitigated because of the distributed processing with a unit of the blocks to the peers.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1112-1115
• /
• 2019

This paper proposes a novel low-profile omni-directional microstrip antenna to mount on the deployable wing of the observation munition. The proposed antenna is designed on seven hexagonal resonators in a quasi-circular array to achieve a monopolar radiation pattern with a thin substrate. By employing the mesh ground structures, the resonant frequencies and impedance bandwidths of the proposed antenna is investigated. To verify the feasibility of the mesh ground structure, the thin ground wire width is investigated theoretically for improving the 3-dB fractional bandwidth, realized antenna gain and quality-factor. The proposed antenna demonstrates a good monopolar radiation in good agreement with the simulation results. The implemented prototype shows the measured bandwidth of 326 MHz with respect to 5.65% centered at 5.77 GHz and realized gain of 5.49 dBi at 5.84 GHz.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.449-455
• /
• 2016

Fog causes economic losses in transportation. It also results in health problems when it is combined with air pollutants. Considerable research efforts have focused on developing fog removal systems. However, most systems operate themselves after monitoring the fog. Additionally, continuous energy supply and maintenance are required to retain the fog-removal efficiency of the system. This study included the demonstration of a moss filter (a polyolefin mesh interlaced with moss) as a fog-removal method overcoming the limitations of the fog removal system. Three types of mosses with different surface structures were investigated to elucidate the relation between the moisture absorption rate and the structures. Among the different moss types, Hypopterygium japinicum showed the highest efficiency based on the smallest pore diameter and the largest total pore area. The visibilities with the moss filter and the polyolefin mesh were compared to perform the fog removal tests. The moss filter could provide a cost-effective and eco-friendly fog removal system with sustainability.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.626-631
• /
• 2006

본 연구는 2006년 7월 집중호우에 의해 많은 인적.물적 피해가 발생한 강원도 지역의 피해 현장을 조사하였으며, 그 중 성토사면붕괴를 붕괴유형별로 구분하고 발생원인과 특성을 분석하여 그에 따른 적절한 대책방안을 제시하였다. 집중호우에 의한 성토사면의 붕괴유형 중 토석류에 의한 도로횡단 배수구조물의 기능상실로 유수가 노면으로 침출되고 수압이 발생하여 도로가 유실된 유형과 하천선형 불량으로 만곡수충부(물이 직접 부딪히는 부분)에서 유속이 빨라져 세굴에 의한 붕괴가 전체성토붕괴사면의 83%를 차지하였다. 이에 대한 대책방안으로는 토석류를 계곡상부에서 부터 예방할 수 있는 방법으로 사방댐 및 그물망 공법 등이 좋은 대책방안이 될 수 있으며, 토석류에 의한 유송잡물을 모두 통과할 수 있도록 충분히 큰 배수시설을 설치하는 방법도 좋은 대책방안이 될 수 있다. 무엇보다 열대성 국지 폭우를 이제 일상의 한반도 기후현상으로 받아들여 주먹구구식의 일회성 대책방안을 지양하고 바뀐 강우특성과 빈도를 고려하여 계획 홍수위를 재산정하고 그에 따라 하천정비계획을 재검토해야 할 것이다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.3
• /
• pp.216-222
• /
• 2010

The structural methods used to protect coastal erosion are usually very expensive in construction as well as in spending on maintaining the structures from damage. Those structures like embankments, breakwaters, jetties etc. are commonly constructed with concretes (rigid methods) to protect coastal erosion. But those rigid methods are not effective always, because the wave energy and impact force on the structures could not be effectively reduced by those methods. For avoiding sediment erosion on coastal areas by the way of reducing wave energy, a flexible breakwater is introduced which will reduce energy and protect coastline economically and environmentally. The flexible device is a combination of flexible wire nets and stack of rings made of used vehicle tires and soft blades on surfaces. This flexible wire net is placed in between two stacks of rings. The stack of rings is mainly used to hold the flexible wire nets and the flexible wire net is mainly used to reduce wave energy and helps to deposit sediments in coastal area. For a field experiment study, the above-mentioned flexible breakwater of coastal protection has been set up at the Shuang-Chun coastal area in Tainan County since June 10, 2009. The length of the flexible device is 50.0 meters and the height is 2.0 meters. The function of the device has been examined by Typhoon Linfa during June 19~22, 2009 and by Typhoon Morakot during August 6~10, 2009. The result shows that the flexible breakwater has effectively trapped sediments and let them deposit on coastal. The depth of sediment deposition around the device was about 0.5 to 0.8 meters.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.348-350
• /
• 2006

전력회사는 전력의 안정성과 신뢰도확보를 위해 끊임없이 노력하고 있지만 전력설비의 자그마한 이상에도 그 파급효과는 상당히 클 수 있다. 특히 한국의 전력계통은 복잡한 그물망 구조를 가지고 있어 작은 선로사고가 국가 전체의 대형정전사고로 이어질 가능성을 가지고 있다. 특히 전력산업의 변화에 의해 전력계통의 대형정전사고의 책임 문제도 발생할 수 있다. 전력선의 사고의 대다수가 1선 지락 사고로 발생되며, 그중에 애자의 절연파괴로 인한 사고가 상당수를 차지하고 있다. 그러나 애자의 절연파괴는 가시적으로 발전하기 어려운 것이 사실이다. 그러므로 본 논문은 센서 및 통신 장비를 이용하여 쉽게 애자의 절연 파괴를 감지하고, 이를 신속하게 운영자에게 알릴 수 있는 시스템의 개요에 대하여 논한다.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.36-42
• /
• 2020

Silver nanowire (AgNW) random-meshes with high transmittance, low sheet resistance, and high oxidation stability and flexibility were fabricated using solution-based processes. The random-mesh structure was obtained by forming bubbles whose sizes and densities were controlled using a corona treatment of polyethylene terephthalate (PET) substrates. To reduce the sheet resistance of the fabricated AgNW electrode, a washing process using ethanol solution was performed. In addition, nickel (Ni) was coated on AgNW to improve resistance to oxidation. The effects of corona treatment and Ni-coating on the transmittance, sheet resistance, oxidation stability, and flexibility of the AgNW electrodes were investigated.

• Water for future
• /
• v.27 no.2
• /
• pp.63-72
• /
• 1994

In this study, hydraulic characteristics for upstream migration of fish in a pool-and-weir fishway were analyzed through experiment. The results showed that streaming flow was preferable to plunging flow for upstream migration of fish and it was not good to make an orifice beneath the septum since it generates turbulent jet and eddies. Protrusions on the side wall of fishway were preferable to grooves since they decelerate flow velocity and make upstream migration easy. A vertically movable septum was necessary for a flushing of deposited bed material, and net installing over fishway was also needed for birds not to approach the fishway and eat fish.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11B
• /
• pp.663-672
• /
• 2007

This paper proposes an algorithm for design of a multiple ring network that can be applied to an arbitrary topology in the WDM optical transport networks. Especially, we suggest an integer linear program(ILP) formulation with the objective of minimizing the total cost of nodes based on the reconfigurable OADM(ROADM) architecture and propose a heuristic algorithm to reduce computational complexity of the exact problem formulation. To evaluate the performance and validity of this scheme, we applied it to an NSFnet topology assuming the dynamic or static traffic condition and compared it with a mesh methodology about capacity of connection requests and the total cost of the nodes.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.3
• /
• pp.115-122
• /
• 2004

When porous materials are dried, the particles flocculate into fish-net structure in gel phase. In order to exactly analyze the stress distribution of porous materials during drying process, the elastic tensor of microscopic gel structures has to be predicted considering pore shapes as well as porosities of porous materials. The elastic characteristics of porous materials associated with porosities were predicted analyzing microscopic gel structures with circular and cross pores via homogenization method and the drying processes of the electric porous ceramic insulator were simulated using finite element method (FEM). Comparing analysis results between consideration and negligence of pores, the deformed shape and distributions of temperature and moisture were similar but the residual stress was significantly different.