• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.45-52
• /
• 2023

The power generation method using expensive diesel has operation problems such as high cost diesel generator and a lack of reserved power due to increase of power demand in some islands, requiring expansion of power generation facilities. To solve this problems, it is necessary to improve the efficiency of power generation facilities through an ORC(Organic Rankin Cycle) system application that uses waste heat as a heat source. Therefore, localized application technology of price competitive and highly reliable ORC power generation system is needed, and optimization technology of generators is having great effect, so this study performed two generator designs to get a high-efficiency generator with an optimized 30kW output. The comparison of simulation data for two designed models showed that a generator with SPM factor of 46.2% had an efficiency of 92.1% and a power ouput of about 23.2kW based on 12,000rpm, a generator with SPM factor of 44.46%, had a power output of 27.9kW and efficiency of 93.6% based on above rpm. For the verification of improved design model with SPM factor of 44.46%, the prototype test system with 110kW motor dynamometer was installed and got to the efficiency of 92.08% with conditions of the rated capacity 25kW at 12,000rpm, the test results of prototype generator showed the validity of generator design.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.258-263
• /
• 2022

This experiment was conducted to confirm the possibility of manufacturing artificial Italian ryegrass hay using far-infrared rays in Korea. The machine used in this experiment was a far-infrared ray dryer capable of adjusting temperature, airflow, and far-infrared radiation, and was conducted on Italian ryegrass harvested in May. Conditions for drying were performed by selecting a total of nine conditions, and each condition was set to emission rate of 42 to 45%, and the internal temperature was set to 65℃. The speed of the air flow in the machine was 40-60 m/s, and the overall drying time was 30 minutes for 42% radiation, 25 minutes for 43% radiation, and 20 minutes for 45% radiation. The final dry matter content according to each drying condition was 88.5% on average, and the dry matter content suitable for hay was shown in the all treatment. Looking at the power consumption according to the drying conditions, the lowest was found in the treatment that dried for 20 minutes at 45% radiation. In the drying rate, there was no difference in drying conditions 1 to 5, but a significantly low tendency was shown in conditions 6 to 7. In terms of feed value, CP and IVDMD were higher than raw materials in most drying conditions, and ADF and NDF contents were low, and tended to be high in drying conditions 4, 7, and 8. Through the above results, it was judged that drying conditions 7 and 8 were the most advantageous when considering drying speed, power consumption, and quality.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.315-324
• /
• 2022

The experimental data obtained in a wave flume were analyzed using machine learning techniques to establish a model that predicts the input wave height of the wavemaker based on the waves that have experienced wave shoaling and to verify the performance of the established model. For this purpose, artificial neural network (NN), the most representative machine learning technique, and Gaussian process regression (GPR), one of the non-parametric regression analysis methods, were applied respectively. Then, the predictive performance of the two models was compared. The analysis was performed independently for the case of using all the data at once and for the case by classifying the data with a criterion related to the occurrence of wave breaking. When the data were not classified, the error between the input wave height at the wavemaker and the measured value was relatively large for both the NN and GPR models. On the other hand, if the data were divided into non-breaking and breaking conditions, the accuracy of predicting the input wave height was greatly improved. Among the two models, the overall performance of the GPR model was better than that of the NN model.

• Clean Technology
• /
• v.29 no.3
• /
• pp.217-226
• /
• 2023

The amount of hydrogen adsorbed in arrays of single walled carbon nanotubes (SWNTs) was studied as a function of nanotube diameter and distance between the nearest-neighbor nanotubes on square arrangements using a grand canonical Monte Carlo simulation. The influence of the geometry of a triangle array with the same diameters and distances was also studied. Hydrogen-carbon and hydrogen-hydrogen interactions were modeled with Lennard-Jones potentials for short range interactions and electrostatic interactions were added for hydrogen-hydrogen pairs to consider quantum contributions at low temperatures. At 194.5 K, Type I isotherms for large-diameter SWNTs and Type IV isotherms without hysteresis between adsorption and desorption processes for wider tube separations were observed. At 200 bars, the gravimetric hydrogen storage capacity of the SWNTs was reached or exceeded the US Department of Energy (DOE) target, but the volumetric capacity was about 70% of the DOE target. At 77 K, a two-step adsorption was observed, corresponding to a monolayer formation step followed by a condensation step. Hydrogen was adsorbed first to the inner surface of the nanotubes, then to the outer surface, intratubular space and the interstitial channels between the nanotube bundles. The simulation indicated that SWNTs of various diameters and distances in a wide range of configurations exceeded the DOE gravimetric and volumetric targets at under 1 bar.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.661-669
• /
• 2022

The need for miniaturization, high efficiency, and green energy resources as an energy storage device through the development of various electronic device has emerged. Accordingly, nanomaterials with excellent electrochemical properties, such as graphene and graphene hybrids, are attracting attention as promising materials. In particular, in the electric vehicle industry, cost reduction of secondary batteries is a key factor that can determine the spread of related industries, and it is most important to analyze R&D trends for battery material technology and respond to future technological development directions. Therefore, in this study, we tried to suggest a direction for R&D activities in the future by analyzing patent trends for graphene anode material technology for secondary batteries and deriving implications. As a result, in the case of anode material technology, the proportion of foreigners in the US and European patent markets was higher than in the Korean and Japanese patent markets, which means that the US and European marketability is high. In addition, Japanese applicants are filing high-level applications not only in the Japanese patent market but also in other countries suggests that Japan is leading the technology in this field. Lastly, the proportion of research institutes in the patent market of Korea and the US remains high compared to that of Japan and Europe, indicating that the commercialization of technology is still slow in those countries. Therefore research institutes and companies in Korea will have to establish their own strategies for developing and securing materials using the results of patent trends in major countries and major companies analyzed in this study.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.662-675
• /
• 2022

This study was intended to investigate and analyze the current status of the plant community structure in order to provide basic data for the systematic conservation and management of the Buxus sinica area appearing on the ridgeline connecting the Gyeokjabong(Mt.) and Keungiljae, on Bogildo Island. In consideration of location characteristics such as density, topography, and direction of B. sinica appearing in the shrub layers, a total of 26 sites were set as the survey area for representative vegetation communities or areas with changes in topography. According to DCA and TWINSPAN, it was classified into 6 communities, namely Carpinus turczaninovii-Deciduous broad-leaved, C. turczaninovii, C. turczaninovii-B. sinica, C. turczaninovii-Evergreen broad-leaved, Q. acuta, and D. trifidus-Q. acuta. The community dominated by C. turczaninovii maintains the status quo for the present moment, however, Q. acuta will dominate the surrounding area in the long term, so Q. acuta has high succesion potential. In the case of the Q. acuta and D. trifidus-Q. acuta communities, Q. acuta, known as the climax species of warm-temperate forests, will maintain dominant status. In a case of B. sinica, the community dominated by C. turczaninovii will remain in good status due to the topographical conditions, but the community dominated by Q. acuta growth difficulties are expected due to the high coverage. In the relationship between environmental factors and vegetation distribution, analysis showed that only soil pH affect vegetation distribution. Furthermore, the soil acidity (pH) was 3.78-5.30, the electrical conductivity was 0.186-0.543 dS/m, and the organic matter content was 2.25-2.89%.

• Membrane Journal
• /
• v.33 no.2
• /
• pp.77-86
• /
• 2023

In this study, pore-filled ion exchange membranes with low membrane resistance and high hydroxide ion conductivity was developed. To improve alkali durability, a porous substrate made of polytetrafluoroethylene was used, and a copolymer was prepared using monomers 2-(dimethyl amino) ethyl methacrylate (DMAEMA) and vinyl benzyl chloride (VBC) for pores. divinyl benzene (DVB) was used as the cross-linker, and ion exchange membranes were prepared for each cross-linking agent content to study the effect of the cross-linker content on DMAEMA-DVB and VBC-DMAEMA-DVB copolymers. As a result, chemical stability is improved by using a PTFE material substrate, and productivity can be increased by enabling fast photo polymerization at a low temperature by using a low-pressure UV lamp. To confirm the physical and chemical stability of the ion exchange membrane required for an anion exchange membrane fuel cell, tensile strength, and alkali resistance tests were conducted. As a result, as the cross-linking degree increased, the tensile strength increased by approximately 40 MPa, and finally, through the silver conductivity and alkali resistance tests, it was confirmed that the alkaline stability increased as the cross-linking agent increased.

• Smart Media Journal
• /
• v.11 no.1
• /
• pp.67-80
• /
• 2022

Smart City Technology, which is significant in the era of the 4th industrial revolution, greatly increases the efficiency and productivity of cities nowadays. The purpose of this study is to present a strategic approach for industrial revitalization and overseas export by analyzing the current status of smart city-related companies and discovering high-priority smart city technologies. To this end, the smart city theory and ASEAN smart city were reviewed through prior research, and a survey of companies with domestic smart city technology was conducted. As a result of the survey, it is revealed that companies with smart city technology in Korea are highly willing to export to ASEAN countries. There is a strong desire to export the following technologies: construction, traffic, green·energy, etc. And there was a high willingness to export the following services: IoT, platform, AI, etc. The following solutions have been proposed as solutions to Strategic Plans to Promote the Export: 1) Deregulation and incentives, 2) Global human resource development, 3) Information provision and strengthening of local networks, 4) Financial and public relations support.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.2
• /
• pp.258-267
• /
• 2023

In this study, to investigate the possibility of using ethanol extract of Petasites japonicus (PJE) as a functional material, we investigated the activity of improving skin barrier and inflammation through UVB-induced human keratinocyte (HaCaT cell). As a result of confirming the antioxidant effect through DPPH radical scavenging activity, ABTS⁺ radical scavenging activity, and hydrogen peroxide scavenging activity, it was confirmed that it had an antioxidant effect similar to that of ascorbic acid, a control, at a concentration of 1 mg/ml. As a result of confirming the mRNA expression of the production ability of filaggrin and aquaporin-3 in HaCaT cells induced by UVB, it was confirmed that the reduced expression level by UVB stimulation increased in a concentration-dependent manner when the PJE was treated. It was confirmed that the mRNA expression of TNF-𝛼 and IL-1𝛽 were increased by UVB stimulation and decreased when the PJE was treated. As a result of the migration assay, it was confirmed that the proliferation of skin keratinocytes and the recovery rate of wounds were increased in a concentration-dependent manner. Based on the experimental results, it suggests that Petasites japonicus can be used as a functional cosmetic product that can improve skin moisturizing and skin barrier function.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.5
• /
• pp.369-383
• /
• 2018

In this paper, suggests a gamification analysis method applied to screen sports. The analysis method is through the process of comparison, collection and application. In the process of comparison, compare the characteristics of actual sports and screen sports and Data collection to complement the differences derived from the comparison process is done during the collection process. Process of application is verify for application status of Gamification. and analyzed of screen golf and screen baseball. The result shows that screen golf couldn't apply walking exercise in the comparison process, and screen baseball couldn't apply exercise elements except batting. During the collection process, driving distance and swing data were used for screen golf, and driving distance, batting average and RBI (runs batted in) data were used for screen baseball. Lastly, it was revealed during the application process that both screen golf and screen baseball provide data to users by using reward, competition and Self-expression elements of gamification. The analysis methods presented in this study can be a method to analyze screen sports, and are expected to be appropriate methods to make screen sports.