본 연구는 환율과 금리 및 주가간의 균형관계를 나타내는 분석모형(分析模型)을 구축 제시하고, 그 분석모형을 구성하고 있는 일별(日別) 국내 외 금융지표의 변동간에 장기관계(長期關係)가 성립하는지 즉, 공적분(共積分) 관계(關係)의 성립여부를 분석하며, 이들 금융지표간 균형관계에 대한 안정성(安定性)(stationary) 여부를 검증함으로써 제시한 분석모형의 유효성(有效性) 즉, 장기모형관계(長斯模型關係)에 대한 성립여부를 분석하는 데 중점을 두고 있다. 분석결과는 분석모형의 변수간 장기관계 즉, 공적분 관계가 존재한다 할지라도 다변량 가설검증에 의하여 분석모형이 장기모형관계(長斯模型關係)로부터 유의적(有意的)으로 이탈할 수도 있다는 사실을 확충하고 있다.
Proceedings of the Korean Society of Precision Engineering Conference
/
1993.04b
/
pp.335-337
/
1993
조립라인의 설계에서 중요한 목적은 조립라인을 구성하는 작업장의 수의 최소화와 각 작업장의 작업내용을 평형이 되도록 요소작업을 할당하는데 있다. 라인균형에 관한 기법은 일반적으로 발견적 기법과 컴퓨터를 이용한는 기법이 주로 개발되어있으며, 개발된 기법들은 공정설계에는 유용하게 사용될 수 있으나 가동괴고 있는 조립라인에서 생산 량의 변화 또는 작업자의 변동이 생기는 경우에 기존의 기법들이 부적절하므로, 특정한 제조 현장 조립라인의 특성에 맞는 기법이 개발되었다. 본 연구는 제조현장에서 공정설계뿐 아니라, 관리 및 개선의 도구로서 유용하게 활용하기 위하여 제조현장의 여러가지 제약조건 가운데서 요소작업의 결합기준과 작업자의 변동성을 고려하여 생산량의 변화 및 작업자의 변동에 따른 공정 배치를 가능하게 하는 개선된 라인균형기법의 개발에목적이 있다. 작업배치를 효과적 으,로 전개하기 위하여요소작업을 블록으로 나누고 Back Tracking 방법, 네트워크의 Branch Node 개념을 도입하여 새로 운 알고리즘을 개발하여 분석평가하였다.
Journal of the Korea Academia-Industrial cooperation Society
/
v.20
no.12
/
pp.418-424
/
2019
The present study investigated the effects of the moment arm length on balance and walking when carrying a backpack. In total, 30 normal adults without orthopedic and neurological injuries were assessed. For each subject, balance and gait were measured under three conditions: 1) the no backpack condition, 2) the general backpack condition, and 3) the decreased length of moment arm backpack condition. There were significant differences in the center of the pressure area and velocity between the three conditions, whereas there was no significant difference in the center of the pressure area and velocity according to the moment arm length. There were significant differences in double limb support time and walking velocity under the three conditions, and there was a significant difference only in double limb support time according to the moment arm length. The results of the present study showed that a change in the length of the moment arm can be helpful for walking when carrying a backpack.
Journal of the Korea Academia-Industrial cooperation Society
/
v.12
no.4
/
pp.1581-1588
/
2011
In this study, flow characteristics in a multi-cavity injection molding process were investigated. One of main problems occurred in the multi-cavity molding is a flow imbalance among cavities since it affects physical properties and quality of products. Charge imbalance is caused by the uneven shear stress. Therefore, changes in viscosity affect the physical properties of resin and injection conditions differ in the filling imbalance phenomenon. Through, this study focus on experimental studies of flow imbalance for PC and PP resin occurring in a balanced delivery system. Experimental results were compared with CAE results. By experimental and CAE analysis, main cause for the flow imbalance is temperature distribution in cross section of runner. New runner system with a simple change of runner shape was suggested to avoid the flow imbalance. A series of simulation to confirm feasibility of Volume Runner's effects was conducted using injection molding CAE.
Journal of the Korea Society of Computer and Information
/
v.19
no.5
/
pp.89-98
/
2014
This paper suggests heuristic algorithm for single-model simple assembly line balancing problem that is a kind of NP-hard problem. This problem primarily can be solved metaheuristic method. This heuristic algorithm set the main-path that has a most number of operations from start to end-product. Then the clustering algorithm can be assigns operations to each workstation within cycle time follow main-path. This algorithm decides minimum number of workstations and can be reduces the cycle time. This algorithm can be better performance then metaheuristic methods.
Journal of the Korea Academia-Industrial cooperation Society
/
v.15
no.4
/
pp.1992-1998
/
2014
This paper aims to understand the meaning of balanced development among regional economies and its importance in the s0-called knowledge-based economy. It is shown that the balanced allocation of human capital is necessary to achieve the efficient allocation of physical capital among regional economies, which makes the equality of marginal product of capital. And a simulation experiment is conducted to calculate the cost of unbalanced growth. It is shown that balanced growth among regional economies may increase the growth rate of whole national economy while unbalanced growth among them reduce it. The policy implication is that for an any economy to grow at a higher rate, the efficient allocation of physical and human capital both are necessary to have the balanced growth of regional economies in knowledge-based economy.
기업의 재무구조와 인플레이션과의 관계는 세율에 대한 다양한 형태의 가정을 통하여 연구, 분석되어 왔으나, 이 문제를 확실히 해결하지는 못하였다. 근자에 A. Marcus(1983)가 미국의 은행의 재무구조를 대상으로 한 시계열분석 결과에 의하면 명목이자율의 상승이 미국은행의 부채 대비 자본금 비율을 하락시키는 절대적 요인이 되었다고 한다. 본 연구의 목적은 인플레이션과 은행의 부채 대비 자본금 비율의 상관관계, 더욱 나아가서 은행자산의 위험도가 이 상관관계에 미치는 영향을 분석코자 한다. 본고는 은행규제기관(FDIC 등)의 부채비율과 은행자산(포트폴리오)의 위험도에 대한 규제하에서 은행이 부채(예금)와 자본금의 가치를 극대화하고자 하는 모델을 설정하여 기대 인플레이션 수준이 은행의 적정 자본비율과 자산의 위험도와 어떤 관계가 있는가를 밀러의 균형모델(Miller Equilibrium Model)을 원용하여 분석하였다. 밀러의 균형모델하에서는 기업의 재무구조는 기업가치와 무관한 것으로 나타나고 있다. 즉, 부채를 통한 자금조달에 의해 발생되는 한계세금혜택은 균형하에서는 사라진다는 이론이다. 따라서 인플레이션은 적정 재무구조에는 영향을 미치지 못하게 된다. 왜냐하면 인플레이션은 기업의 세후 부채조달비용과 회사채 투자자 수익에 동일한 영향을 미치기 때문이다. 그러나 은행의 경우 일반 기업과는 달리 은행규제기관의 부채비율 및 자산위험도에 대한 규제압력이 소위 암묵적 규제비용으로 작용하여 은행의 적정자본금비율은 부채(예금)를 통한 자금조달의 한계세금혜택과 이에 따른 한계규제바용이 동일하게 되는 경우에 결정된다. 밀러의 단순균형 모델하에서 한계세금혜택이 없는 것과는 달리 은행의 부채조달에 따른 한계규제비용이 존재하는 이유로 균형조건으로 한계세금이익이 존재하게 된다. 이 경우 인플레이션은 예금자의 실질 세후 예금이자를 상승시키는 것 이상으로 은행의 실질 세후 예금이자 지급비용을 하락시키게 되어 은행의 부채비율을 더욱 높이게 되는 원인이 된다. 또한 은행의 부채비율이 인플레이션과 정(正)의 관계에 있다면 은행규제의 강도에 따라 이 상관계수는 은행자산의 위험도와도 역시 정(正)의 관계에 있게 된다. 미국은행을 대상으로 한 회귀분석에서도 그들의 부채(예금)비율이 기대 인플레이션과 정(正)의 상관관계가 있음이 나타났고 그 상관계수는 은행자산의 위험도와 동일 방향으로 움직임이 판명되었다.
Proceedings of the Korean Information Science Society Conference
/
2000.10a
/
pp.572-574
/
2000
리스트 기반 스케줄링은 하드웨어의 자원이 일정한 수준으로 제한된 상황에서 스케줄링에 필요한 컨트롤 스텝의 수를 최소화하고자 하는데 중점을 둔 일련의 스케줄링 기법 중 하나로, 연산의 우선 순위를 결정한 뒤, 그 우선 순위에 의거하여 준비된 일단의 연산들에 대한 스케줄링을 수행하는 방식이다. 따라서 연산의 우선 순위를 결정하는데 고려되는 조건들은 리스트 기반 스케줄링의 성능에 직접적인 영향을 주며, 현재까지 다양한 우선 순위 결정 조건들이 제시되어 있다. 그런데, 최종 합성 결과는 상위 수준 합성의 대상이 되는 입력 그래프의 특성에 따라 그 성능이 좌우되므로 일반적인 의미에서 최적의 우선 순위 결정 조건이란 존재하지 않는다. 본 논문에서는 단일한 우선 순위 조건하에서 경합하는 연산들의 우선 순위 결정 조건이란 존재하지 않는다. 본 논문에서는 단일한 우선 순위 조건하에서 경합하는 연산들의 우선 순위 결정시 다양한 우선 순위 결정 조건들을 균형있게 고려하여 보다 효율적인 스케줄링 결과를 얻는 방법을 제시하였다.
Small injection molded articles are generally molded by multi-cavity injection molding. The most important thing in multi-cavity molding is flow imbalance among the cavities because it affects the physical property and the quality of products. The cavity filling balance can be achieved by flow balance in the runner through the thermal balance. In this study, novel screw type runner or helical type runner has been developed for the flow balance in the runner and performed experiment and computer simulation. Flow balance has been observed using various screw type runners for several resins such as amorphous and crystalline polymers including low and high viscosities grades. Flow balance experiments have been performed for various injection speeds since the flow balance can be affected by injection speed among the injection conditions. Experimental results have been compared with computational results and they showed good agreement. The cavity filling balance can be achieved by the screw runner where the temperature distribution is uniform through the circulation flow along the screw channel in the screw runner. It has been verified that the novel screw runner is very effective device in flow balance in the multi-cavity injection molding. cavity filling imbalance, multi-cavity injection molding, runner design, screw runner, thermal balance.
his study was to investigate effects of improvement of balance abilities through 8-weeks Transcutaneous Electrical Nerve Stimulation (TENS) and balance training in the women elderly. 42 women elders who were participated in silver college. Randomized study design of two groups was used: TENS group (21 women, 84.53 years old) and balance training group(21 women, 79.93 years old). Each group had a application of TENS, balance training by a researcher three times per week for 8 weeks. Measurements of static postural sway velocity on the floor and foam, timed get up and go test (TUG), functional reach test (FRT), and lateral functional reach test (LFRT) were evaluated at initial presentation (pretest) and after completion of the each intervention program (posttest). The results showed that the TUG was significantly decreased in all groups (p<.05) and the postural sway velocity using force plate in all conditions was significantly decreased in all groups (p<.05). FRT and LFRT were significantly increased in all groups (p<.05). There were significantly differences in TUG and postural sway velocity on the eye closed condition between two groups (p<.05). In conclusion, the application of TENS to older adults whose somatosensory were deteriorated was effective for improvement balance ability.
이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.