• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.89-89
• /
• 2011

Cellulose섬유의 염색시 섬유가 물속에 침지되면 섬유표면은 음전하가 형성되어, 용액 속에서 음이온으로 존재하는 염료와의 반발력으로 인해 염료가 섬유에 접근하기가 어려워지며 따라서 염색이 원활하게 이루어지지 않는다. 그러나 염욕에 염화나트륨(sodium chloride, NaCl)이나 망초 즉, 황산나트륨(Glauber's salt, sodium sulfate, Na2SO4)과 같은 전해질을 첨가하면, 양이온인 sodium 이온이 섬유표면과 음이온 염료사이의 반발력을 감소시킨다. 따라서 음이온의 염료는 섬유표면에 접근할 수 있고, 고유한 인력으로 염색이 가능하게 된다. 현재 Cellulose섬유의 상업적인 반응성염료 염색공정뿐만 아니라 최근 연구에서는 전해질 중 대부분 분말망초를 대부분 사용하고 있다. 그러나 분말망초는 별도의 용해과정이 필요할 뿐 아니라, 과량 사용시 용해되지 않은 분말이 섬유 표면에 흡착될 경우 불균염을 초래할 우려 등의 단점이 있다. 이와 같이 작업효율성을 향상시키고 염색을 효율적으로 진행시키기 위해 최근 액상형의 망초가 도입되고 있다. 이 연구에서는 분말 및 액상 망초를 조제로 사용하여 3종류의 Cellulose섬유를 반응성염료로 염색하였다. 담색, 중색, 농색 3가지 염료 농도에 대해 투입하는 망초의 type에 따라 각각의 Cellulose섬유별 균염성 정도에 대하여 비교해 보았다.

• The Research Journal of the Costume Culture
• /
• v.11 no.3
• /
• pp.416-422
• /
• 2003

Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California, exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. In searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value-added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The results indicated that sodium sulfate could be produced from the salt and could be purified by a recrystalization method in a temperature range within the highest and lowest daily temperatures in summer in the valley. The recovered sodium sulfate samples, with purities ranging from 67% to 99.91, were compared with commercially available sodium sulfate in the dyeing of levelling dyes with nylon/wool fabrics. In nylon/wool fabrics, C.I. Acid Yellow 23 had similar exhaustions among Na₂SO₄ I, Na₂SO₄ II, Na₂SO₄ III and Na₂SO₄ Ⅴ which had similar ratios of sodium sulfate and sodium chloride in recovered salts. Na₂SO₄ Ⅳ had low exhaustion which had low ratios of sodium sulfate and sodium chloride. In nylon/wool fabrics, C.I. Acid Blue 158 had similar exhaustions among Na₂SO₄ I, Na₂SO₄ II, Na2₂SO₄ III, Na₂SO₄ IV and Na₂SO₄ Ⅴ despite of Na₂SO₄ Ⅳ had low ratios of sodium sulfate and sodium chloride Generally, the dyeing of levelling dyes using recovered salts from farm drainage has similar or low exhaustion than the dyeing of levelling dyes using commercial sodium sulfate.

• Clean Technology
• /
• v.10 no.1
• /
• pp.19-25
• /
• 2004

The leather was fixed with various colors through the dyeing process in leather manufacturing. During the dyeing process, the amount of 30~50% dyestuff which were not bonded with leather drained with waste water. These dyestuff raise lots of environmental problems, so technology for improving the fixing effect, levelling effect and penentration effect with the use of small amount of dyestuff has been required. Also, insufficient color fastness level 2~3 grade for common natural leather needs to be improved at the same time. Accordingly, the use of ultrasound(us) in dyeing process has decreased the amount of dyestuff and obtained the smooth permeability effect. So, we could find that the reduction of amount of dyestuff in wastewater led to decrease in environmental trouble caused by leather waste water with severe contamination degree and improved fastness up to 0.5 grades.

• Textile Coloration and Finishing
• /
• v.16 no.4
• /
• pp.1-9
• /
• 2004

In recent, development of nano fiber has been one of the most active subjects in the world. Nano fiber is defined as a ultra fine yarn with a diameter unit of $10-100\times10^{-9}meter$, which is possible to be produced by an electro-spinning technology. In this study, physical characteristics and dyeing properties of nylon 66 nano fiber were investigated. Nylon 66 nano fiber was dyed with levelling type acid dyes. X-ray diffraction method and DSC analysis were used for the measurement of the degree of crystallization. Analysis of amino end groups was also performed in order to examine a relationship between number of amino groups and its dyeing property as well as water absorption behavior. The maximum exhaustion % of dyes and dyeing rate under various dyeing conditions, such as dyeing temperature and pH in dye bath, along with build-up properties for 2 acid dyes were evaluated. It was found that the degree of crystallization of nano fiber was smaller than that of regular fiber, and amino end groups of nano fiber were less than regular fiber. Half dyeing time of nano fiber was shorter than regular fiber because of the bigger specific surface area. Effect of pH on exhaustion % was small in case of nano fiber. Exhaustion of nano fiber increased with higher concentration of dye.