• Title/Summary/Keyword: 균등 배열

Search Result 31, Processing Time 0.034 seconds

Comparison on Track Formation Range between TWS and Adaptive Tracking Using Markov Chain Analysis in a Radar System (레이더에서의 Markov Chain 분석을 이용한 TWS 방식과 Adaptive Tracking 방식의 추적 형성 거리 비교)

  • Ahn, Chang-Soo;Roh, Ji-Eun;Jang, Sung-Hoon;Kim, Seon-Joo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.24 no.5
    • /
    • pp.574-580
    • /
    • 2013
  • Compared with the TWS(Track While Scan) tracking that uses scan-to-scan correlation at search illuminations for targets track, a phased array radar can use adaptive tracking which assigns additional track illuminations and the track formation range can be improved as a result. In this paper, an adaptive tracking, the search and track illuminations of a target are synchronized such that the extra illuminations are evenly distributed between the search illuminations, is proposed. Markov chain and track formation range for the proposed adaptive tracking are shown with them for the conventional TWS. The simulation result shows that the proposed adaptive tracking has improved track formation range by 27.6 % compared with the conventional TWS tracking under same track confirmation criterion.

Measurement of Hardness and Adhesiveness of Cooked-Rice (밥블록을 이용한 찰밥의 경도 및 부착성 측정법)

  • Lee, Y.J.;Hwang, S.W.;Park, Y.S.;Yoon, W.J.;Chun, J.K
    • Applied Biological Chemistry
    • /
    • v.38 no.5
    • /
    • pp.398-402
    • /
    • 1995
  • Hardness and adhessiveness of cooked rice were measured with rice grain and rice block methods by texturemeter. In grain method 3, 4 and 5 grains were arranged and subjected to the texture test with a plastic plunger at 95% strain and 0.5mm/sec speed. The hardness were 7.4kg, 7.5kg and 10.0kg respectively and the coefficient of variation ranged from 37.0% to 25.9%, which was mainly due to the irregular geometry of the grains in each specimen set Adhesiveness could not be measured with this method. A cylindrical rice block($H/D=20mm{\times}15mm$) was made for the texture analysis. The hardness was 2.1 kg with coefficient of variation ranging from 2.8 to 7.0%, and the block method was s more reproducible compared to the grain method. A grooved plastic plunger and platform were designed for the measurement of adhesiveness of cooked rice block. The adhesiveness was 0.68kg sec and the coefficient of the variation was 4.6%.

  • PDF

Fairness-Based Beam Bandwidth Allocation for Multi-Beam Satellite Communication System (다중 빔 위성 통신 시스템을 위한 공평성 기반 빔 대역폭 할당)

  • Jung, Dong-Hyun;Ryu, Joon-Gyu
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.24 no.12
    • /
    • pp.1632-1638
    • /
    • 2020
  • In this paper, we investigate a multi-beam satellite communication system where multiple terminals transmit information signals to the gateway via a satellite. The satellite is equipped with phased array antennas to form multiple spot beams of which bandwidths are not identically allocated. We formulate an optimization problem to maximize fairness of beam bandwidth allocation. In order to solve the problem, we propose two heuristic algorithms; iterative beam bandwidth allocation (IBBA) and request ratio-based beam bandwidth allocation (RRBBA) algorithms. The IBBA algorithm iteratively equalizes the ratio of allocated bandwidth of each beam to their resource request while the RRBBA algorithm allocates beam bandwidth calculated from the ratio. Simulation results show that the IBBA algorithm has close fairness performance to the optimum while the RRBBA algorithm has less performance than the IBBA algorithm at the price of reduced computational complexity.

Evaluation for Rock Cleavage Using Distribution of Microcrack Lengths (미세균열의 길이 분포를 이용한 결의 평가)

  • Park, Deok-Won
    • The Journal of the Petrological Society of Korea
    • /
    • v.24 no.3
    • /
    • pp.165-180
    • /
    • 2015
  • Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. The phases of distribution of microcracks were well evidenced from the enlarged photomicrographs(${\times}6.7$) of the thin section. In this study, the length - cumulative frequency diagrams were used for expressing the distribution characteristics of microcrack. The diagrams for the six directions were arranged in the magnitude of density(${\rho}$). These diagrams show an order of H2 < H1 < G2 < G1 < R2 < R1 from the related chart. Among six diagrams, the diagram for hardway 2(H2) occupies the lowermost region on the left. On the contrary, the diagram for rift 1(R1) occupies the uppermost region on the right. Curve patterns of the two diagrams change from uniform to exponential distribution type in accordance with the increased density. The overall distribution characteristics of the diagrams were well evidenced from the magnitude of the exponent(${\lambda}$) and length of line oa related to the exponential straight line. The magnitude of exponent governing the values of slope(${\theta}$) is inversely proportional to the values of microcrack parameters such as number(N), length(L) and density. On the contrary, length of line oa is directly proportional to the values of the above three parameters. Above microcrack parameters related to the order of arrangement of diagrams show an order of hardway(H1 + H2) < grain(G1 + G2) < rift(R1 + R2). The distribution characteristics of progressive variation are found among the six diagrams. The order of arrangement of the diagrams indicates a relative magnitude of the rock cleavage. Meanwhile, the parameters such as slope, exponent, density and length of line oa were arranged in an order of H2 < H1 < G2 < G1 < R2 < R1. The variation curves of a smooth quadratic function are shown from the related chart. From the correlation chart between density and the above parameters, a common regularity following power-law correlation function was derived. Finally, the analysis for the rock cleavage was conducted through the combination between the diagram and microcrack parameter. This type of combination contribute to the progressivity in evaluation for the rock cleavage.

Effect of Soil Environment on Diversity and Population of Aerobic Soil Bacteria from Baekdudaegan Mountain Forests in Gyeongsangbuk-do, Korea (경상북도 산림지역의 토양 환경이 호기성 토양 세균의 다양성과 밀도에 미치는 영향)

  • Park, Chul Yeong;Lee, Sun Keun;Kim, Ji Hong;Lee, Sang Yong;Lee, Jong Kyu
    • Journal of Korean Society of Forest Science
    • /
    • v.101 no.3
    • /
    • pp.501-508
    • /
    • 2012
  • This study was carried out to compare species diversity of soil bacteria from Baekdudaegan mountain forests (Bonghwa-gun, Mungyeong-si and Sangju-si) in Gyeongsangbuk-do and to analyze the effects of soil environments on diversity and population of soil bacteria. Soil bacteria were isolated from soil samples by streak plate method, and identified by DNA extaction and 16S rDNA sequence analyses. The population of soil bacteria from the soil samples of Bonghwa-gun was the highest with $5.1{\times}10^5cfu/g$, and followed by those from Mungyeong-si and Sangju-si with $1.9{\times}10^5cfu/g$ and $1.1{\times}10^5cfu/g$, respectively. The population of soil bacteria from surface layer soil was the highest, and then gradually decreased according to soil depth. The increase in population of soil bacteria from soil samples of different sites was correlated with the increase of the altitude of soil sampling site, depth of A horizon, liquid phase among three phases of soil, water content and bulk density of soil. Two hundreds and sixty eight bacterial colonies from Bonghwa-gun were classified into 10 species, 8 genera. One hundred and thirty four bacterial colonies from Mungyeong-si were classified into 15 species, 9 genera. Forty four bacterial colonies from Sangju-si were classified into 5 species, 2 genera. The dominant species (occupancy rate) from Bonghwa-gun and Mungyeong-si were Bacillus weihenstephanensis (36% and 40%, respectively), and Sangju-si was Bacillus cereus (39%). The relationships between soil environment and community structure of soil bacteria were analyzed statistically by using ecological indices. The diversity, evenness and dominance indices of soil bacteria were 6.30, 2.04 and 0.59 in Bonghwa-gun, 9.09, 2.94 and 0.51 in Mungyeong-si, and 4.55, 2.34 and 0.71 in Sangju-si, respectively. The diversity and evenness indices were increased by the increase of water content, drainage condition and gravel content of soil, while the dominance index was decreased.

In Vitro Construction and Characterization of the Bacteriophage P4 Derivative, P4 sid71 cosP2, Containing the Bacteriophage P2 cos Region (박테리오파지 P2의 cos 지역을 함유하는 박테리오파지 P4 유도체인 P4 sid71 cosP2의 In vitro 조성과 정성 연구)

  • Kim, Kyoung-Jin
    • Korean Journal of Microbiology
    • /
    • v.49 no.1
    • /
    • pp.99-104
    • /
    • 2013
  • Bacteriophage P2 sir mutants are inefficient helpers for their satellite bacteriophage P4. The term, "P2 sir-associated helper inefficiency" has been used to define this phenomenon and it has been suggested that the DNA sequence difference between the cos region of P2 and that of P4 is responsible. To test this hypothesis, P4 derivative phage, P4 sid71 cosP2, containing the cos region of P2 and sid71 allele was constructed through several in vitro DNA manipulation steps. Its burst size was determined using a one-step growth experiment. The results showed that the substitution of the cos region of P2 for the cos region of P4 in P4 sid71 cosP2 overcame "P2 sir-associated helper inefficiency". P4 sid71 cosP2 stock phages prepared with P2 wild type helper and P2 sir helper were analyzed using a CsCl buoyant equilibrium density gradient experiment. The results revealed that the phage particles containing three copies of the P4 genome were the predominant particles in both cases.

THE USE OF REMOVABLE APPLIANCE FOR THE CORRECTION OF MINOR IRREGULARITIES IN ANTERIOR SEGMENT (전치부의 경미한 공간부조화 개선을 위한 가철성 장치의 적용 예)

  • Kwak, Ah-Ram;Choi, Yeong-Chul;Park, Jae-Hong;Choi, Seong-Chul;Kim, Gwang-Chul
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.34 no.4
    • /
    • pp.685-693
    • /
    • 2007
  • Class I malocclusion without skeletal problem results from tooth size/arch-size discrepancies, either evidenced by crowding, or spacing problems. Treatment method can be chosen according to dentition, the amount of arch discrepancy, patient compliance, or patient demands. We report of clear aligner and spring aligner that can be applicated in cases of permanent dentition with minimal arch discrepancy in anterior segment. There are some limits of application, but these are very useful appliances in the selective case. When crowding exists, definitive analysis and diagnosis should be made before starting treatment because certain amount of space must be obtained somewhere in the dentition to resolve the crowding. Therefore, appliance should be applied when lacking space is small. Also, in cases with spacing arch circumference is reduced after alignment so no problem in intermaxilla occlusal relationship must be confirmed. In case with crowding, judicious removal of interproximal enamel is indicated.

  • PDF

A Study on the Characteristics of Oddly Shaped Stone's Arrangement at Donggwoldo (동궐도(東闕圖)에 나타난 괴석(怪石)의 배치특성에 관한 연구)

  • Jung, Woo-Jin;Kim, Hwa-Ok;Park, Yool-Jin
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.32 no.2
    • /
    • pp.12-26
    • /
    • 2014
  • This study has researched the forms of arrangement and use of the oddly shaped stones which were used at palaces during Joseon Dynasty based on arrangements of stones as shown in Donggwoldo(東闕圖), and tried to identify its special features. The sorts of stone's arrangements which set formal patterns by assisting an axis in Donggwoldo can be classified as the single type using one stone, the symmetrical type using 2 stones symmetrically and the parallel type using 3 or more stones. The single type was used to endow a focal point and to accent centrality by arranging a stone on the axis performed from formal shaped buildings. The symmetrical type was used to show order and hierarchy by placing two odd-shaped stones on either side of a building. And the parallel type which is arranged three stones side by side, is put a middle stone on the central axis line to determine strong directional and frontality. Also similarity to method of arrangement of stones can be found from planting trees in a prominent way for scenery or planting trees symmetrically. Stones and trees can be chosen according to nature and scale of places and basically their effects of formation of axis and creating typical space is same. Based on these respect, the characteristics of arrangement of stones shown in Donggwoldo can be briefly summarized as follows. First, the oddly shaped stones were used by creating a centripetal space in order to show a grade of rank. Second, the distances among stones could be adjusted to the sizes of the architecture which was at the center. The aim was to provide stability through the balanced composition between the central axis and symmetrical structures. Third, the form of regularity was added by using stone vase in consideration of irregular shape of stone causing interference in forming regular symmetry. Fourth, a centrality was emphasized by adding change to central stones in the parallel type used 3 erect stones. Fifth, the sizes of stone were limited in order to make smooth for the mix and adjustment of its position with the types of other garden ornaments, so the oddly shaped stones in palace have portability. Sixth, the oddly shaped stones in palace which were appreciated as inspirational object basically were a sculpture of the same quality with suiseki (壽石), and the appreciative method, the composition and shape had developed in the same texture. Finally, the even number of stones by parallel type were arranged by equal partition. But odd number of stones followed the method with symmetrical arrangement on its center stone. These principles of stone arrangement are judged as distinguishing methods which oddly shaped stones was made and used in Joseon palaces.

Interstitial Vaginal Needle Implantation in Gynecological Tumors : Design and Construction of Applicator (부인과암에서 조직내 삽입 방사선치료 - Applicator의 고안 및 제작-)

  • Kang, Seung-Hee;Chun, Mi-Son;Kang, Hae-Jin;Jung, Chil;Son, Jeong-Hyae
    • Radiation Oncology Journal
    • /
    • v.16 no.2
    • /
    • pp.167-175
    • /
    • 1998
  • Purpose : It is not a simple task to achieve the ideal isodose curve with a standard vaginal applicator or sing1e plane needle impant in the paravaginal tissue when primary or recurrent gynecological neoplasms(cervical cancers, vaginal cancers and vulvar cancers) are treated as a boost following external beam radiotherapy. The authors introduce the development and construction of a simple, inexpensive, customized applicator for volume implant to maximize the radiation dose to the tumor while minimizing the dose to the rectum and the bladder. Materials and Methods : Nine patients underwent Ir-192 transperineal interstitial implantation for either recurrent(5 cases) or primary(3 cases) cervical cancers or primary vaginal cancer(1 case) between August 1994 and February 1998 at Ajou university hospital. First 3 cases were performed with a sing1e plane implant guided by digital palpation. Because of inadequate isodose coverage in the tumor volume in first 3 cases, we designed and constructed interstitial vaginal applicator for volume implant to improve tumor dose distribution and homogeneity while sparing the surrounding normal tissue. Our applicators consist of vaginal obturator and perineal template that made of the clear acrylamide and dental mold material$(Provil^{(R)})$. The applicators were customized individually according to the tumor size and its location Both HDR and LDR irradiation were given with these applicators accomodating 6 Fr needles(Microselectron Nucletron). The pretreatment planning prior to actual implant was performed whenever possible. Results : Needles can be inserted easily and evenly into the tumor volume through the holes of templates, requiring less efforts and time for the implant procedure. Our applicators made of materials available from commercial vendors. These have an advantage that require easy procedure, and spend relatively short time to construct. Also it was possible to fabricate applicators to individualize according to the tumor size and its location and to achieve the ideal isodose coverage. We found an accurate needle arrangement and ideal dose distribution through the CT scan that was obtained in 3 cases after needle implant. Three patients with primary cervical and vaginal cancers were controlled locally at final follow up. But all recurrent cases failed to do so. Conclusion : The authors introduce inexpensive, simple interstitial vaginal templates which were self-designed and constructed using materials available from commercial vendors such as acrylanide and dental mold material $(Provil^{(R)})$.

  • PDF

Effect of Preoperative White Blood Cell Count on Postoperative Course in Patients with Coronary Artery Bypass Grafting (관상동맥우회술 환자에서 술 전 백혈구 수치가 수술 후 경과에 미치는 영향)

  • Son Kuk Hui;Kim Jae Ho;Kim Joung Taek;Yoon Yong Han;Kim Kwang Ho;Baek Wan Ki
    • Journal of Chest Surgery
    • /
    • v.38 no.10 s.255
    • /
    • pp.669-674
    • /
    • 2005
  • Background: There are several studies that report the relationship between leukocytosis and cardiovascular disease mortality. Most of these studies stand on the basis that atherosclerosis is mediated by inflammatory process. By the same token, preoperative white blood cell count is suggested as an independent predictable factor of postoperative mortality and morbidity in coronary artery bypass grafting. The purpose of this study is to define the influence of preoperative white blood cell count on postoperative morbidity and mortality after coronary artery bypass grafting. Material and Method: The medical records of the 133 patients who had undergone isolated coronary artery bypass grafting at Inha University Hospital from 1996 to 2003 were reviewed. Patients were evenly divided into four groups, and named as group A, B, C, and D respectively based on their preoperative white blood cell count in ascending order. The number of patients in each group were 33 with exception of 34 in group A. The range of white blood cell count were from $1.3\times10^3/{\mu}L\;to\;5.9\times10^3/{\mu}L\;in\;group\;A,\; from\;6.0\times10^3/{\mu}L\;to\;7.0\times10^3/{\mu}L\;in\;group\;B,\;from\;7.1\times10^3/{\mu}L\;to\;8.9\times10^3/{\mu}L$ in group C, and from $8.9\times10^3/{\mu}L\;to\;16.9\times10^3/{\mu}L$ in group D. Result: The number of patients with recent myocardial infarction was 0 in group A, $2(6.1\%)$ in group B, $4(12.1\%)$ in group C, and $8(24.3\%)$ in D group, showing proportional increase to the white blood cell count (p<0.01). There were six postoperative deaths; $1(2.9\%)$ in group A, $1(3.0\%)$ in group B, $2(2.6\%)$ in group C, and $2(6.1\%)$ in group D (p=0.44), showing no significant difference between the groups. Postoperative wound infection occurred in 3 patients; all 3 patients were in group D, showing that postoperative wound infection is closely related to the preoperative white blood cell count. Conclusion: The association between preoperative white blood cell count and postoperative mortality could not be defined. The incidence of postoperative wound infection was found to be proportional to the preoperative white blood cell counts.