• Title/Summary/Keyword: 굴뚝

Search Result 163, Processing Time 0.023 seconds

Estimation of SO2 emissions in large point sources at Dangjin City using airborne measurements (항공관측 결과를 활용한 당진시 대형사업장에서의 황산화물 배출량 평가)

  • Kim, Yong Pyo;Kim, Saewung;Kim, Jongho;Lee, Taehyoung
    • Particle and aerosol research
    • /
    • v.16 no.4
    • /
    • pp.107-117
    • /
    • 2020
  • Based on the airborne measurement results over a coal fired power plant and steel work in Dangjin city, SO2 emission amounts of each site are estimated (top-down emission). Airborne measurements were carried out on May-June and October-November 2019. The estimated SO2 emission in 2019 for the power plant was 1502.1 kg/hr and that for the steel work was 2850.5 kg/hr, higher as much as a factor of 2.5 and 2.0, respectively, than the emission amounts provided by both facilities (bottom-up emission). The outcomes strongly illustrates that well designed airborne observations can serve a quantitative diagnostic tool for bottom-up emission estimates. Further research direction to improve the reliability of the top-down emission estimates is suggested.

Measurement and analysis of PM10 and PM2.5 from chimneys of coal-fired power plants using a light scattering method (광산란법을 이용한 국내 석탄화력발전소 굴뚝에서 배출되는 PM10, PM2.5 측정 및 분석)

  • Shin, Dongho;Kim, Younghun;Hong, Kee-Jung;Lee, Gunhee;Park, Inyong;Kim, Hak-Joon;Kim, Yong-Jin;Han, Bangwoo;Hwang, Jungho
    • Particle and aerosol research
    • /
    • v.16 no.4
    • /
    • pp.131-140
    • /
    • 2020
  • Air pollutants emitted from chimneys of coal-fired power plants are considered to be a major source of fine particulate matter in the atmosphere. In order to manage fine particle in the chimney of a coal-fired power plant, it is necessary to know the concentration of fine particle emitted in real time, but the current system is difficult. In this study, a real-time measurement system for chimney fine particle was developed, and measurements were performed on six coal-fired power plants. Through the measurements, the mass concentration distribution according to the particle size could be secured. All six chimneys showed bimodal distribution, and the count median diameters of each mode were 0.5 and 1.1 ㎛. In addition, it was compared with the gravimetric measurement method, and it was determined that the relative accuracy for PM10 was within 20%, and the value measured using the developed measuring instrument was reliable. Finally, three power plants were continuously measured for one month, and as a result of comparing the concentration of PM10 according to the amount of power generation, it was confirmed that the PM10 discharged from the chimney increased in the form of an exponential function according to the amount of power generation.

Characteristics of Breeding Bird Community in Relation to Altitude and Vegetation in Jirisan National Park (지리산국립공원 해발고도와 식생에 따른 번식기 조류군집의 특성)

  • Lee, Do-Han;Kwon, Hye-Jin;Song, Ho-Kyung
    • Korean Journal of Environment and Ecology
    • /
    • v.22 no.5
    • /
    • pp.471-480
    • /
    • 2008
  • This study was conducted to investigate the characteristics of breeding bird community in relation to altitude and vegetation in Jirisan National Park. The survey was carried over 4 study sites by point counts method to figure out habitat environment and breeding bird community from March to August in 2006. The study results are summarized as follows: Total 32 species were recorded, and 27 species and density of 37.31 ea/ha in low altitude mixed forest, 23 species and 34.99 ea/ha in low altitude deciduous forest, 18 species and 23.95 ea/ha in high altitude mixed forest, 19 species and 20.21 ea/ha in high altitude deciduous forest, respectively. Eleven species were observed only in the low altitude sites, 4 species were observed only in the high altitude sites. Number of species and density were high in the low altitude sites, and they were high in the mixed forests. In nesting guild analysis, the low altitude sites are similarly found species number of three types but canopy nesting species in the high altitude sites are advent less. In foraging guild analysis, the species number of canopy foraging appeared most highly in all study sites. In the difference analysis of each species density. Four species which are showed the difference in the low altitude sites, owing to vegetation. Long-tailed Tit(Aegithalos caudatus) and Great tit(Parus major) are difference because of difference in volume of canopy layer, and Coal Tit(Parus ater) was difference because of coniferous forest preference quality. Four species(Hazel Grouse, Winter Wren, Pale Thrush, Yellow-throated Bunting) which are showed the difference of the density in the high altitude sites because of thick growth of the bush layer. Ten species which are showed the difference in study sites, owing to altitude. Oriental Cuckoo(Cuculus saturatus), Winter Wren(Troglodytes troglodytes), Siberian Blue Robin(Luscinia cyane), Arctic Warbler(Phylloscopus borealis), Coal Tit(Parus ater), and Yellow-throated Bunting(Emberiza elegans) appeared highly in the high altitude sites, Pale Thrush(Turdus pallidus), Long-taild Tit(Aegithalos caudatus), Varied Tit(Parus varius), and Eurasian Nuthatch(Sitta europaea) appeared highly in the low altitude sites. It seems that bush layer coverage volume and canopy layer total coverage volume do influences on the breeding bird community, because the bush layer was thick growth, and canopy layer coverage volume was difference. It would be needed the management and maintenance of bush layer coverage volume and canopy layer with multi-layer structure to increase foliage height diversity and total coverage volume for the protection and management of bird community in Jirisan National Park.

Statistically Analyzed Effects of Coal-Fired Power Plants in West Coast on the Surface Air Pollutants over Seoul Metropolitan Area (통계적 기법을 활용한 서해안 화력발전소 오염물질 배출에 따른 수도권 지표면 대기오염농도 영향의 분석)

  • Ju, Jaemin;Youn, Daeok
    • Journal of the Korean earth science society
    • /
    • v.40 no.6
    • /
    • pp.549-560
    • /
    • 2019
  • The effects of the coal-fired power plant emissions, as the biggest point source of air pollutants, on spatiotemporal surface air pollution over the remote area are investigated in this study, based on a set of date selection and statistical technique to consider meteorological and geographical effects in the emission-concentration (source-receptor) relationship. We here proposed the sophisticated technique of data processing to separate and quantify the effects. The data technique comprises a set of data selection and statistical analysis procedure that include data selection criteria depending on meteorological conditions and statistical methods such as Kolmogorov-Zurbenko filter (K-Z filter) and empirical orthogonal function (EOF) analysis. The data selection procedure is important for filtering measurement data to consider the meteorological and geographical effects on the emission-concentration relationship. Together with meteorological data from the new high resolution ECMWF reanalysis 5 (ERA5) and the Korea Meteorological Administration automated surface observing system, air pollutant emission data from the telemonitoring system (TMS) of Dangjin and Taean power plants as well as spatio-temporal air pollutant concentrations from the air quality monitoring system are used for 4 years period of 2014-2017. Since all the data used in this study have the temporal resolution of 1 hour, the first EOF mode of spatio-temporal changes in air pollutant concentrations over the Seoul metropolitan area (SMA) due to power plant emission have been analyzed to explain over 97% of total variability under favorable meteorological conditions. It is concluded that SO2, NO2, and PM10 concentrations over the SMA would be decreased by 0.468, 1.050 ppb, and 2.045 ㎍ m-3 respectively if SO2, NO2, and TSP emissions from Dangjin power plant were reduced by 10%. In the same way, the 10% emission reduction in Taean power plant emissions would cause SO2, NO2, and PM10 decreased by 0.284, 0.842 ppb, and 1.230 ㎍ m-3 over the SMA respectively. Emissions from Dangjin power plant affect air pollution over the SMA in higher amount, but with lower R value, than those of Taean under the same meteorological condition.

H-T-P reaction Study on differences between the juvenile delinquents groups classified by the family system type for Creative happy Education management (창의적 행복학교 교육경영을 위한 HTP 검사 반응 연구)

  • Park, Soon Marn;Choi, Chong Myoung;Kim, Jin Nyo;Byun, Sang Hae
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.8 no.3
    • /
    • pp.157-163
    • /
    • 2013
  • This study is to notify differences of H-T-P reactions between Juvenile delinquents groups classified by family system type. This study aims to know reaction of 'House' on each juvenile delinquents and apply to creative school education administration. The research was performed as below: First, Measuring and descriptive statistical analysis were performed. One hundred and twenty subjects who were youths disposed of Seoul nambu youth alternative education center. Data were collected from July to October in 2012. Then There were classified Two groups following subjects; 'parents family' and 'single parent family'. Second, Questionaries assessing demographic and H-T-P by Buck, N. Third, statistical analysis was done by SPSS for Window 18.0. To Verify the reliability of the measures and correlations between two groups, and to find out the difference of the reaction of 'House', were used frequency analysis and Pearson Chi-Square. The results of this is significant personality types of juvenile delinquents are followings; The Juvenile delinquents living 'Single parent family' have frustrations for their past and current family. Also they have mental conflicts for their family better than another group.

  • PDF

Comparative Study on the Shape and Symbolism of Flowered-Wall in Tradition Private Houses and Temples - Focusing on the Designated Cultural Properties of Jeollabuk-do Province - (전통민가와 사찰에 나타난 꽃담의 형태와 상징성 연구 - 전라북도 문화재를 중심으로 -)

  • Go, Yu-Ra;Sin, Sang-Sup
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.34 no.3
    • /
    • pp.18-27
    • /
    • 2016
  • A 'flowered-wall,' which are also called a 'flower plant patterned wall,' or a 'flower patterned wall,' is a wall of a building or a fence with various patterns on it. A flowered-wall can be an external mean to look into the owner's authority and values while internally it possesses the symbolic meaning of wishing the well-being and peace of the household. In the research area of the flowered-wall, the walls located in the palace were well researched in various studies across architecture, horticulture, and art design, however, the walls belonging to the local regional traditional folk houses and temples have been involved in little to no research in the landscape architectural area. Taking notice of this perspective this study researched and analyzed the cases of the flowered-walls of the traditional folk houses and the temples that belonged to the national and municipal cultural properties of Jeollabuk-do Province from the landscape architectural perspective. The whole samples were examined and it was shown that there were 9 traditional folk houses with flowered-walls. Among the temples there were 7 cases. Therefore the research focusing on tracing the shape and symbolic meaning of the flowered-walls in the 16 cultural properties located in the Jeollabuk-do Province which consisted of traditional folk houses and temples resulted in the following. Flowered-walls displayed hierarchical differentiation revolving around the main space and its spacial characteristic. This differentiation is variously displayed across the flowered-wall, gable, crack plastering, and chimney. In the case of the folk houses the symbols have the meaning of the prosperity of the household and progeny, exorcism, longevity, number of fortune, harmony, and peace etc that prays for practical wishes such as long life and good health with the prosperity of their descendants. Meanwhile in the temples, symbols indicating an easy passage into eternity, perpetuation of the Buddha-nature, and three marks of existence are applied, differentiating from the folk houses by the appliance of the religious values in the patterns. In conclusion this research resulted in the rightful illumination on the local landscape culture, the possibility of expressing the Korean sentiment through flowered-walls in the contemporary space, the reassessment of flowered-walls, and the provision of basic data for a plan to success the cultural heritage.

NOx Emission Characteristics with Operating Conditions of SNCR in SRF Usage Facilities (고형연료제품 사용시설에서의 SNCR의 운전조건에 따른 NOx 배출특성)

  • Seo, Je-Woo;Kim, Younghee
    • Clean Technology
    • /
    • v.27 no.4
    • /
    • pp.350-358
    • /
    • 2021
  • The results of this study shows that the combustor temperature ranged from 848.27 to 1,026.80 ℃, averaging about 976.61 ℃, and the NOx concentration increased as the temperature increased. The urea usage ranged from 291.00 to 693.00 kg d-1, averaging about 542.34 kg d-1, and the NOx concentration decreased as the urea usage increased. Residence time was about 3.38 to 9.17 s, averaging about 5.22 s, about 2.61 times larger than the 2 s of the design details. This is 1,086 kg h-1, averaging about 55.71%, compared to the 1,950 kg h-1 SRF input permission standard. The combustion chamber area is constant, but the residence time is shown to increase with the decrease of exhaust gas. The O2/CO ratio was 847.05 to 14,877.34, averaging about 3,111.30, and the NOx concentration slightly increased as the O2/CO ratio increased. As the combustor temperature and O2/CO ratio increased, the combustion reaction with nitrogen in the air increased and the NOx concentration slightly increased. As the urea usage and residence time increased, the NOx concentration decreased slightly with an increase in reactivity with NOx. The NOx concentration at the stack ranged from 7.88 to 34.02 ppm with an average of 19.92 ppm, and was discharged within the 60 ppm emission limit value. The NOhx emission factor was 1.058 to 1.795 kg ton-1, averaging about 1.450 kg ton-1. This value was about 24.87% of the maximum emission factor of 5.830 kg ton-1 of other solid fuels. Other synthetic resins and industrial wastes were 79.80% and 43.65% compared to 1.817 kg ton-1 and 3.322 kg ton-1, respectively. This value was similar to 1.400 kg ton-1 of RDF in the NIER notice (2005-9), 10.98% compared to the maximum SRF of 13.210 kg ton-1. Therefore, the NOx emission factor had a large deviation.

Study on the Concentration Estimation Equation of Nitrogen Dioxide using Hyperspectral Sensor (초분광센서를 활용한 이산화질소 농도 추정식에 관한 연구)

  • Jeon, Eui-Ik;Park, Jin-Woo;Lim, Seong-Ha;Kim, Dong-Woo;Yu, Jae-Jin;Son, Seung-Woo;Jeon, Hyung-Jin;Yoon, Jeong-Ho
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.6
    • /
    • pp.19-25
    • /
    • 2019
  • The CleanSYS(Clean SYStem) is operated to monitor air pollutants emitted from specific industrial complexes in Korea. So the industrial complexes without the system are directly monitored by the control officers. For efficient monitoring, studies using various sensors have been conducted to monitor air pollutants emitted from industrial complex. In this study, hyperspectral sensors were used to model and verify the equations for estimating the concentration of $NO_2$(nitrogen dioxide) in air pollutants emitted. For development of the equations, spectral radiance were observed for $NO_2$ at various concentrations with different SZA(Solar Zenith Angle), VZA(Viewing Zenith Angle), and RAA(Relative Azimuth Angle). From the observed spectral radiance, the calculated value of the difference between the values of the specific wavelengths was taken as an absorption depth, and the equations were developed using the relationship between the depth and the $NO_2$ concentration. The spectral radiance mixed gas of $NO_2$ and $SO_2$(sulfur dioxide) was used to verify the equations. As a result, the $R^2$(coefficient of determination) and RMSE(Root Mean Square Error) were different from 0.71~0.88 and 72~23 ppm according to the form of the equation, and $R^2$ of the exponential form was the highest among the equations. Depending on the type of the equations, the accuracy of the estimated concentration with varying concentrations is not constant. However, if the equations are advanced in the future, hyperspectral sensors can be used to monitor the $NO_2$ emitted from the industrial complex.

Characteristics of Greenhouse Gas Emissions from Charcoal Kiln (숯가마에서 발생하는 온실가스 배출 특성)

  • Lee, Seul-Ki;Jeon, Eui-Chan;Park, Seong-Kyu;Choi, Sang-Jin
    • Journal of Climate Change Research
    • /
    • v.4 no.2
    • /
    • pp.115-126
    • /
    • 2013
  • Recently Korea considers the source of biomass burning emissions reflecting national characteristic, so that includes the inventory of emission source but preceding research is rarely implemented in Korea. Therefore, a study on characteristics of greenhouse gas emissions from biomass burning is necessary and it also makes the source management effectively when the climate-atmospheric management system takes effect. In this study, using the manufactured charcoal kiln and the number of experiment was three times to get a reliable experiment result. The sampling time was decided by changing degree in charcoal kiln and charcoal manufacturing process. The results of calculation greenhouse gas emission factor from charcoal kiln were $668g\;CO_2/kg$, $20g\;CH_4/kg$, $0.01g\;N_2O/kg$. Using the emission factor developed in this study, estimate the emissions from charcoal kiln in Korea. The results of calculation were $46,040ton\;CO_2/yr$, $1,378ton\;CH_4/yr$, $0.69ton\;N_2O/yr$ and greenhouse gas emissions applying GWP are as follows. $CH_4$ emissions was $28,947ton\;CO_2eq./yr$, $N_2O$ emissions was $214ton\;CO_2eq./yr$. As a results, Gross emissions of charcoal kiln in Korea was $75,201ton\;CO_2eq./yr$, but the oak used in this study is included to the biomass so emissions of $CO_2$ are excluded. Therefore the net emissions of charcoal kiln in Korea was $29,161ton\;CO_2eq./yr$.

A Study on Classifications and Trends with Convergence Form Characteristics of Architecture in Tall Buildings (초고층빌딩의 융합적 건축형태 분류와 경향에 관한 연구)

  • Park, Sang Jun
    • Korea Science and Art Forum
    • /
    • v.37 no.5
    • /
    • pp.119-133
    • /
    • 2019
  • This study is as skyscrapers are becoming increasingly taller, more constructors have decided the height alone cannot be a sufficient differentiator. As a result, atypical architecture is emerging as a new competitive factor. Also, it can be used for symbolizing the economic competitiveness of a country, city, or business through its form. Before the introduction of digital media, there was a discrepancy between the structure and form of a building and correcting this discrepancy required a separate structural medium. Since the late 1980s, however, digitally-based atypical form development began to be used experimentally, and, until the 2000s, it was used mostly for super-tall skyscrapers for offices or for industrial chimneys and communication towers. Since the 2000s, many global brand hotels and commercial and residential buildings have been built as super-tall skyscrapers, which shows the recent trend in architecture that is moving beyond the traditional limits. Complex atypical structure is formed and the formative characteristics of diagonal lines and curved surfaces, which are characteristics of atypical architecture, are created digitally. Therefore, it's goal is necessary to identify a new relationship between the structure and forms. According to the data of Council on Tall Buildings and Urban Habitat (CTBUH), 100-story and taller buildings were classified into typical, diagonal, curved, and segment types in order to define formative shapes of super-tall skyscrapers and provide a ground of the design process related to the initial formation of the concept. The purpose of this study was to identify the correlation between different forms for building atypical architectural shapes that are complex and diverse. The study results are presented as follows: Firstly, complex function follows convergence form characteristics. Secondly, fold has inside of architecture with repeat. Thirdly, as curve style which has pure twist, helix twist, and spiral twist. The findings in this study can be used as basic data for classifying and predicting trends of the future super-tall skyscrapers.