• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.14-19
• /
• 2014

Nanocomposites based on poly(methyl methacrylate) (PMMA)/poly(vinylidene fluoride) (PVDF) and poly(ethylene terephthalate) (PET)/(PVDF) blended with carbon fibers (CF) and carbon nanotube (CNT) were prepared by melt mixing in the twin screw extruder. Morphologies of the PMMA/PVDF/CF/CNT and PET/PVDF/CF/CNT nanocomposites were investigated using SEM. The aggregation of CNT was observed in PMMA/PVDF/CF/CNT nanocomposites while the good dispersion of CNT was shown in PET/PVDF/CF/CNT nanocomposites. In SEM image of PET/PVDF/CF/CNT nanocomposite, the CNT were mainly located at the PET domain of phase-separated PET/PVDF blend due to the ${\pi}-{\pi}$ interaction between the phenyl ring of PET and graphite sheet of the CNT's surface. In addition, a fairly good compatibility between PET/PVDF matrix and CF was shown in the SEM image. In the case of PET/PVDF nanocomposites blended with the co-addition of CF and CNT, the volume electrical resistivity decreased while no change was observed in PMMA/PVDF/CF/CNT composites. The degree of CNT dispersion in morphology results was consistent with the electrical conductivity results. From the DSC results, the crystallization temperature (Tc) of PET/PVDF/CF/CNT nanocomposites increased due to the co-addition of CF and CNTs acting as a nucleating agent. Flexural modulus of PET/PVDF/CF/CNT were sharply enhanced due to increasing the interaction between PET and CF.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1068-1075
• /
• 2012

Poly(butylene terephthalate) (PBT)/Nylon6,12 core/shell micro fiber were prepared by extrusion molding. To investigate their optimum extrusion conditions, compatibility of PBT/Nylon6,12 blend micro fiber in conformity to their weight ratio and manufacture temperature was explored with SEM morphology and DSC. The alterations in their mechanical properties by extrusion speed were compared and analyzed through a UTM. In comparison with SEM figures, the domain sizes of Nylon6,12 were gradually declined by increasing the extrusion temperature of blends. Furthermore, according to these SEM images, the phase separation between Nylon6,12 domain and PBT matrix became indistinct with increasing of weight percentage of Nylon6,12. In case of DSC, the boundaries of two peaks were almost disappeared when increasing the extrusion temperature and also intervals of each two melting peaks became narrow as increasing the Nylon6,12 ratio. The mechanical properties including tensile strength, elongation, flexural strength and flexural modulus were increased as the increase in the extrusion temperature until $260^{\circ}C$. However, the mechanical properties were actually deteriorated over $260^{\circ}C$. The tensile strength, elongation, flexural strength and flexural modulus at $260^{\circ}C$ were 560 $kg_f/cm^2$, 220%, 807 $kg_f/cm^2$ and 22,146 $kg_f/cm^2$, respectively. These values are more than intermediate values of mechanical properties of PBT and Nylon6,12. These results mean that there is compatibility between PBT and Nylon6,12. Based on the extrusion conditions that produced optimum compatibility of blend, as a result, our group obtained micro fibers with the core/shell structure.

• Korean Security Journal
• /
• no.21
• /
• pp.1-18
• /
• 2009

Background: This study was to investigate the effects of spinal strengthening exercise and lumbar stabilization exercise(core exercise program) on trunk muscle strength, flexibility and balance, lumbar function. The subjects of this study were the eighteen subjects who was registered in private guard company. The each exercise group of 9 persons were chosen by random controlled trial. Methods: We used instrument BTE, Libra, Ruler Measuring tape to measured trunk muscle strength, flexibility, balance and lumbar function. Results: The result of this study were summarized below; The flexor muscle strength was improve in lumbar stabilization exercise(core exercise) group(p<.05). The extensor muscle strength was improve in lumbar stabilization exercise(core program) group(p<.05). The trunk flexibility was improve in spinal strengthening exercise group and lumbar stabilization exercise group(p<.05). The balance ability was improve in spinal strengthening group and lumbar stabilization exercise group(core program) group(p<.05). Conclusion: With the above results, demonstrated effects of spinal strengthening exercise and lumbar stabilization exercise in each private guard and security in this study.

• The Journal of Korean Academy of Sensory Integration
• /
• v.20 no.3
• /
• pp.1-13
• /
• 2022

Objective : The purpose of this study was to investigate changes in somato-sensory and occupational performance of individually tailored sensory integration interventions for school-age children with somatodyspraxia. Methods : A single subject study with an AB design was conducted the total sessions were 11 sessions, consisting of 3 baseline sessions and 8 intervention sessions. To compare the effects before and after the intervention, the intervention was measured by dividing it into Performance Area (PA) and Performance Factor (PF), and after each intervention session, the Goal Attainment Scale (GAS) was implemented. Results : The children participating in this study showed overall improvement in PA and PF after the intervention, and after each session, it was confirmed that the GAS increased when measuring the target activities (Supine Flexion Posture; SFP, Walking by Arms; WA, Stand on Balance Ball; SBB). Conclusion : This study provided evidence that sensory integration has a positive effect on performing target activities (SFP, WA, SBB) and improving relationships with peers in children with somatodyspraxia.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.5
• /
• pp.504-509
• /
• 2005

Background : Endobronchial tumors cause life-threatening dyspnea and can lower the quality of life due to central airway obstruction. In those cases with an intraluminal tumor, various bronchoscopic techniques are available for tumor debulking. The therapeutic effect of bronchoscopic electrocautery for palliation in patients with a symptomatic tumor obstruction was studied. Method : Nineteen patients with bronchogenic carcinomas (n=15) and metastatic tumors affecting the bronchi (n=4), between March 2002 and March 2005, were enrolled in this study. Electrocautery was performed under local anesthesia using an electroprobe and diathermic snare. Using flexible bronchoscopy, a follow-up bronchoscopic examination was performed 3-4 days later. Symptom improvement was evaluated by $FEV_1$, FVC and dyspnea score (Modified Borg Category Scale (0~10)), both before and after the electrocautery. Results : The success rate of electrocautery on the follow up examination was 84%. Patients with endoluminal airway lesions had a mean overall decrease in the size of the obstruction to $47.8{\pm}15.7%$. The mean Improvement in the dyspnea score immediately after the endobronchial tumor debulking was $2.78{\pm}1.42$. The average improvements in the $FEV_1$ and FVC after electrocautery were $0.32{\pm}0.19L$ and $0.5{\pm}0.22L$, respectively. There were 2 cases of complications related with electrocautery (one each of pneumothorax and pneumonia). Conclusion : Electrocautery using an electroprobe and diathermic snare was an effective and safe palliative treatment for a symptomatic endoluminal airway obstruction in lung cancer.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.2 no.2
• /
• pp.79-88
• /
• 2007

Objectives : This research is aimed to confirm the treating patients with herniated lumbar disc using Chuna treatment. Methods : Out of patients who were confirmed to have a herniated lumbar disc by MRI among the patients in oriental medical hospital of Kyungwon University from July 2005 to Dec 2006, we dived 15 people was treated common treatment, 15 people was treated both common treatment and Chuna treatment. We measured Visual Analog Scale(VAS) and symptom grade before and after treatment in each groups. Statistical analysis was performed by using SPSS program. Results : The result of the Visual Analog Scale(VAS) and symptom grade before and after treatment between two group, shows that the improvement of Back pain and Sciatica in common treatment with Chuna treatment group is more effective than that in only common treatment group.

• Journal of Korean Academy of Nursing
• /
• v.45 no.6
• /
• pp.823-833
• /
• 2015

Purpose: The purpose of the study was to investigate the effects of the Thera-Band exercise program following total knee arthroplasty. Methods: The research design for this study was a nonequivalent control group non-synchronized design. Participants were 30 patients for the experimental group and 30 patients for the control group. The experimental group participated in the Thera-Band exercise program in addition to conventional CPM (continuous passive motion) exercise. The control group received conventional CPM exercise only. Outcome measures were pain, knee flexion range of motion, CRP, and psychological parameters (self-efficacy and fear of falling). Data were analyzed using ${\chi}^2$-test, Fisher's exact test, t-test, and repeated measure ANOVA with SPSS/PC version 21.0. Results: There were significant improvement in self-efficacy, and decreases in pain, and fear of falling in the experimental group compared to the control group. However, no significant differences were found between the two groups for CRP and knee flexion ROM. Conclusion: The Thera-Band exercise program gave an additional benefit over the conventional CPM exercise for patients following total knee arthroplasty, and is recommended for use as an effective nursing intervention for patients after total knee arthroplasty.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.32.1-32.1
• /
• 2009

본 연구에서는 산화 그라핀을 환원하여 얻은 그라핀 분말의 고온 XRD 패턴를 통해 그라핀의 열팽창계수를 정량하였다. 산화 그라핀은 Hummer method에 의해 제조되었다. 또한 그라핀은 산화그라핀을 1273K에서 열처리하여 얻어졌다. 1273K에서 그라핀의 열팽창계수($32.9{\pm}1.0$ X 10-6 K-1)는 원료인 흑연(30.3 X 10-6 K-1) 보다 8.6% 더 크게 나타내는것을 알 수 있었다. 그라핀은 화학적 처리에 의한 급격한 면간 팽창과 열처리에 의한 aggregation에 의해 심하게 굴곡지고 적층된 morphology를나타냈다. 이는 박리효과에 의한 것으로 XRD 패턴을 통해그라핀의 층수가 흑연보다 훨씬 적은 것을 알 수 있었다. 이에 따라 면간 규칙적인 배열을 보이는 흑연과는 달리 그라핀은 흑연구조에서 흔히 보이는 disorder 구조인turbostratic 적층 구조를 나타나고 면간인터렉션이 약화되어 열팽창계수가 크게 나타난다고 생각된다.

• The Journal of Korean Physical Therapy
• /
• v.17 no.4
• /
• pp.559-567
• /
• 2005

The purpose of this research is to study how the stretching exercise along with heat and electric therapy can effect on Angle of Lumbar Flexion and Reduction of Pain against the Hamstring Construction Symptom that can be found in the Chronic Low Back Patients. The target of research was 28 person selected out of the patients diagnosed as Lumbar Sprain and Lumbar Syndrome, who have positive from the active test of Hamstring construction and passive test. Their age range is 20 to 60 years old, 14 male and 14 female. As a research method, simple heat and electric therapy was applied to counter part while Hamstring Stretching Exercise including simple heat and electric therapy was applied to the experimental part. After 6 weeks treatment for each part, the results of effect on Angle of Lumbar Flexion and Pain Reduction was compared and analysed on the basis of the gravity angle meter and Visual Analogue Scale (VAS). The outcome of research is as follows: 1. Angle of Lumbar Flextion increased effectively not in the conventional counter group but the experimental group to which Hamstring Stretching was applied simultaneously. 2. remarkable effect was shown in the experimental part applied Hamstring Stretching. Consequently from the results of this study, we could find out the fact that the therapy combined preserve treatment and hamstring stretching not only produced increasing Lumbar Flexion Angle but also was more effective on reducing pain of the patients according to it than the conventional or preserve therapy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.367-371
• /
• 2007

Nanocomposites prepared by PP(Polypropylene) based compatibilizers modified with GMA(Glycidyl methacrylate) and HEMA(Hydroxyethyl methacrylate) were used to investigate the clay dispersion and mechanical properties of them. XRD patterns showed the improvement of dispersion through clay intercalation according to the compatibilizers and comonomer. GMA modified polypropylene gave the best mechanical properties of the nanocomposite with respect to the balance of Flexural modulus (FM) and Notched izod impact strength(IS). Compatibilizers with comonoer commonly have higher grafting yield and lower melt flow rate than those of comonomer free. And they enhanced the clay dispersion and mechanical properties of nanocomposites. Optimum ratio of monomer to comonomer for nanocomposites having better mechanical properties is about 1 to 1 ratio.