• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.209-222
• /
• 2011

Missing anterior teeth can be replaced using any of a number of methods. Patients may choose to replace missing teeth with a prosthesis that is either removable, fixed, or retained with implants. For patients faced with financial, anatomical, and/or esthetic limitations, the edentulous region can be restored successfully and esthetically with a properly designed and fabricated rotational path RPD. The rotational path RPD is a partial removable dental prosthesis that incorporates a curved, arcuate, or variable path of placement allowing one or more of the rigid components of the framework to gain access to and engage an undercut area. The rigid retainer must gain access to the infrabulge portion of the tooth by rotating into place. Either a minor connector or proximal plate provides retention through its intimate contact with a proximal tooth surface. A specially designed dovetails or asymmetric rest seats provides support and embracing effects. Correctly designed and fabricated rotational path RPD can provide improved esthetics, cleanliness, and retention. But rotational path RPDs are technique sensitive since the rotational path RPD has little margin of laboratory error that rigid retainers cannot be adjusted like conventional clasps can, RPD framework must be remade once the retention is lost. The sufficient understanding of the concept for the rotational path RPD is required for clinically successful treatment. This clinical report describes in detail the theoretical, laboratory considerations and the treatment of a patient with an anterior maxillary edentulous area treated by an AP path rotational RPD that had a difficulty in long term maintenance and describes another clinical case in which more reasonable treatment procedures were approached after analyzing the former case.

• Journal of Periodontal and Implant Science
• /
• v.18 no.2
• /
• pp.122-122
• /
• 1988

• Journal of Periodontal and Implant Science
• /
• v.21 no.2
• /
• pp.184.1-184.1
• /
• 1991

• Journal of Periodontal and Implant Science
• /
• v.14 no.1
• /
• pp.73-73
• /
• 1984

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.176-177
• /
• 2000

대도시의 국소지역인 도심지 도로변 양측은 빌딩에 의해 둘러싸여 있어 canyon으로 비유되어 street canyon이라고 하며 도로에 관한 선행연구는 도로변에 관한 것과 street canyon에 관한 것 그리고 두 경우를 전부 포함하는 경우로 분류할 수 있다. 도로변에 있어서 자동차 배출가스의 확산 예측에 관한 연구는 가우시안형 해석해 모형이 가장 많고 그 외 비가우시안형 해석해 모형, 반경험식 모형, 수치해 모형으로 분류되고 있다. (중략)

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.104-111
• /
• 2006

A ventilated disc brake having spirally fluted surface has been proposed to improve the thermal judder by way of heat transfer enhancement. The local heat transfer coefficients were measured in the flow passage of disc brake. These measured local heat transfer data were utilized to do the finite element numerical analysis which predicts the maximum temperatures on the disc brake. The results show that the maximum temperatures on the disc surface with spirally fluted surface are approximately 26.6% lower than those without them.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.5 s.60
• /
• pp.613-625
• /
• 2002

This paper aimed to investigate the damage process of steel parts experiencing failure under strong repeated loading. Likewise, a damage index using various factors related to the damage was proposed. An analysis method for evaluating the damage state was also developed. The damage assessment method focused on the local strain history at the cross-section of the heaviest concentration of deformation. Cantilever-type steel parts were analyzed under uniaxial load combined with a constant axial load, considering horizontal displacement history, Loading patterns and steel types were considered as the main parameters in analyzing the models. The effects of the parameters on the failure modes, deformation capacity, and damage process as seen from the analysis results were also discussed. Each failure process was compared as steel types. In addition, the failure of steel parts under strong repeated loading was determined according to loading. Results revealed that the state of the failure is closely related to the local plastic strain.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.663-668
• /
• 2003

We studied a localized hologram recording method that can be used in a disk-shaped medium. In this method, the reference beam is focused by use of a cylindrical lens to get a thin spot in the medium, and then a hologram is recorded in that spot by illuminating the signal beam. Many localized holograms are multiplexed by shifting the medium by a distance more than the thin spot size of the reference beam. This method does not need recording-time scheduling for uniform diffraction efficiencies. We show that a minimal required thickness of the recording medium exists for a given spot size of the signal beam. We performed experiments for data storage and retrieval, and obtained a storage density of 20 bits/${\mu}{\textrm}{m}$$^2$ and a raw-bit error rate (RBER) of 2.5${\times}$10$^{-3}$ , when a 2 mm-thick Fe-doped LiNbO$_3$ crystal was used.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.353-358
• /
• 2021

This study provides the syntactic analysis for the agreement attraction by proposing three types of syntactic subject-verb agreement. Because subject-verb number agreement codifies the link between a predicate and its subject, it must be the purely syntactic processes of the head-to-head agreement or the feature percolation, where relevant agreement features percolate upward or downward through the hierarchical syntactic structure. The agreement errors are not affected by linear proximity or minimal interference, but instead are affected by the hierarchical relationship between an agreement target and a local attractor. The data in this paper includes the complex noun phrases with a modifier PP or a relative clause CP. Here, the [+PL] feature is suggested to be a local attractor for subject-verb agreement errors as a strong feature. Therefore, speakers tend to erroneously produce plural agreement for a singular subject in a main clause due to a plural NP in a modifier PP or plural agreement for a singular subject in a relative clause due to plural main subject.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.309-316
• /
• 2010

This paper proposed a nonlocal anisotropic damage model to simulate the behavior of plain and reinforced concrete structures that are predominantly tensile and compressive load. This model based on continuum damage mechanics, used a symmetric second-order tensor as the damage variable. For quasi-brittle materials, such as concrete, the damage patterns were different in tension and in compression. These two damage states were modeled by damage evolution laws ensuring a damage tensor rate proportional to the total strain tensor in terms of principal components. To investigate the effectiveness of proposed model, the double edge notched specimen experimented by nooru-mohamed and reinforced concrete bending beam were analyzed using the implementation of the proposed model. As the results for the simulation, the nonlocal anisotropic damage model with an adequate control of rupture correctly represented the crack propagation for mixed mode fracture. In the structural failure of reinforced concrete bending beam, the proposed model can be showed up to a very high damage level and yielding of the reinforcements.