• Journal of Ocean Engineering and Technology
• /
• v.9 no.1
• /
• pp.36-46
• /
• 1995

빙판파괴 형태는 여러 모드의 합성이며 실제로 한 가지 양식으로 파괴되는 경우는 거의 일어나지 않는다. 이제까지 빙하중 해석 이론이나 방법은 한 가지 양식에 기준하는 것이었다. 이 논문에서는 합성모드로 빙판이 파괴될 때 해양구조물에 작용하는 빙하중 추정방법을 소개하여 모형 실험결과치와 그 결과를 비교하였다. 두 가지 합성모드에 대한 빙하중 추정방법인 비례파괴해석법 (Proportional Failure Method)과 국부경계해석법(Local Ice boundary Method)을 본논문에 소개하였으며, 이 두가지 방법과 함께 널리 알려진 Crushing 해석방법을 적용하여 정적 및 동적 구조물에 작용하는 빙하중을 산출/비교하였다. 동적구조물은 쇄빙선을 이용하였고, 쇄빙선이 SPM 터미널에 monopod로 연결되어있는 형태를 선택하였다. 모형 실험은 Finland의 Wartsila 실험실에서 실시 하였고, 이 실험을 통하여 쇄빙선에 작용하는 빙력 및 시간별 쇄빙선의 동적 움직임을 측정하였다. 이 논문에서는 위에서 소개된 세가지 방법으로 계산된 빙하중과 실험측정결과를 비교하였고, 이론적으로 추정한 쇄빙선의 운동을 실혐결과치와 비교하였다. Crushing방법으로 산출한 빙하중은 실제치보다 상당히 높았고, 비례파괴해석법은 Crushing 방법보다 정확한 결과를 보여주었으며, 국부경계해석법은 상당히 모형실험측정치와 가까웠다. 물론 쇄빙선의 움직임도 빙하중에 따라 변화가 심했고, 국부 경계해석법을 적용했을 때 실제 쇄빙선의 동적움직임을 가장 가깝게 추정할 수 있었다.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.143-148
• /
• 2013

The aim of this study is to investigate the characteristics on the profile of local ice load acting on side shell of port side in bow part due to broken ice during icebreaking of ships in ice covered waters. The first Korean icebreaking research vessel 'ARAON' had a sea ice field trial in the Arctic Sea during early August, 2010, and the signals due to local ice impact measured from several strain gauges installed at bow part were gathered. It is known that these data with structural response characteristics due to local ice impact have some different characteristics with a typical hydraulic impact pressure - time history. In this study, the time history on the measured signals was analyzed and the characteristic values were presented using non-dimensional parameters.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.5
• /
• pp.82-87
• /
• 2013

The icebreaking research vessel ARAON conducted her second ice trial in the Arctic Ocean during the summer season of 2010. During this voyage, the local ice loads acting on the bow of the port side were measured using 14 strain gauges. The measurement was carried out during icebreaking while measuring the thickness of the ice every 10 m. The obtained strain data were converted to the equivalent stress values, and the effects of the ship speed and ice thickness on the ice load were investigated. As a result, it was found that a faster speed produced a larger stress, according to the variation in the peak values below an ice thickness condition of 1.5 m. Meanwhile, the effect of the ice thickness on the ice load was not clear.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.161-167
• /
• 2019

This paper focuses on a newly designed ice load formula based on the ARAON's 2016 Arctic field data in order to improve a structural design against ice loads. The strain gage signals from ARAON's hull plating were converted to the local ice pressure upon the hull plating using the influence coefficient matrix and finite element analysis. First, a traditional pressure-area relationship is derived by applying probabilistic approaches to handle the strains measured onboard the ARAON. Then, the local ice load prediction formula is re-analyzed after reviewing the ARAON's additional field data to consider information about the ship speed and thickness of the sea ice. It is shown that the newly developed pressure-area relationship well reflects the influence of other design parameters such as the ship speed and ice thickness in the prediction of local ice loads on Arctic vessels.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.529-535
• /
• 2016

This study focuses on the comparison of measured data from 6-DOF motion sensor and strain gauge installed in the IBRV ARAON during 2015 summer voyage in the Arctic. Procedures to calculate the global ice load from MotionPak II inertial measurement system and the local load from stain gauge system are discussed. The ship's speed and peak load are determined in the concept of an ice collision "event". It is found that the peak values in the global ice calculated form whole ship motion analysis fall in the range of 1.5~3 times of the local ice load based in strain gauge measurement.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.5
• /
• pp.330-338
• /
• 2021

This paper focuses on the improvement of the influence coefficient matrix method for estimation of local ice load on the icebreaking research vessel ARAON. The influence coefficient matrix relates ice pressure on the hull plate to the measured/calculated hull strain/stress. Conventionally von Mises equivalent stresses representing hull stresses and ice pressure acting on the hull plate are utilized to assemble the influence coefficient matrix. Because of the three dimensional features of the ship-ice collision process, an enhanced method to assemble the influence coefficient matrix is derived considering ice loads in the X, Y, and Z direction simultaneously. Furthermore the location of ice loads acting on hull-plate may fall outside the measuring sensor area, and the enhanced influence coefficient matrix is modified to reduce the difference between the actual and the estimated ice loads by expanding the domain outward from the sensor area. The developed method for enhanced influence coefficient matrix is applied to IBRV ARAON during the 2019 Antarctic ice field test and the local ice loads in three directions are efficiently calculated compared to those by a conventional method.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.6
• /
• pp.468-473
• /
• 2016

This paper focuses on the estimation of local ice loads exerted from ship-ice interaction processes. The Korean IBRV ARAON was used to perform field ice trials during her 2015 Arctic voyage. During ARAON's general ice transit, a total of 72 channels of data from both strain gauges on the inner hull plates and those installed on the transverse frames of the ARAON's bow section structures were analyzed to calculate the local ice loads. The local ice loads estimated from the analysis of the shear strain data measured on the side frames were compared to those from the hull plate pressures.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.6
• /
• pp.353-364
• /
• 2020

This paper presents the semi-analytical ice load calculation methods that are useful to simulate the ice-breaking process. Since the semi-analytical methods rely on the previously developed closed form equations or numerical analysis results, the user's exact understanding for the equations must be supported in order to use the methods properly. In this study, various failure modes of ice such as local crushing, in-plane splitting failure, out-of-plane bending failure and radial or circumferential cracking with rotation of the broken ice floe are considered. Based on the presented methods, the fracture modes were evaluated according to the size and thickness of ice. In addition, time series analysis for the ice-breaking process was performed on several ice conditions and the results were analyzed.