• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.100-109
• /
• 2019

Maintainability indicates the extent to which maintenance can be done easily and quickly. The consideration of maintainability is crucial to reduce the operation and support costs of weapon systems, but if the maintainability is evaluated after the prototype production is done and necessitates design changes, it may increase the cost and delay the schedule. The evaluation should verify whether maintenance work can be performed, and support the designers in developing a design to improve maintainability. In previous studies, the maintainability index was calculated using the graph theory at the early design phase, but evaluation accuracy appeared to be limited. Analyzing the methods of evaluating the maintainability using fuzzy logic and 3D modeling indicate that the design of a system with good maintainability should be done in an integrated manner during the whole system life cycle. This paper proposes a method to evaluate maintainability using SysML-based modeling and simulation technique and fuzzy logic. The physical design structure with maintainability attributes was modeled using SysML 'bdd' diagram, and the maintainability was represented by an AHP matrix for maintainability attributes. We then calculated the maintainability using AHP-based weighting calculation and fuzzy logic through the use of SysML 'par' diagram that incorporated MATLAB. The proposed maintainability model can be managed efficiently and consistently, and the state of system design and maintainability can be analyzed quantitatively, thereby improving design by early identifying the items with low maintainability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1094-1103
• /
• 2012

Recently, software industry regarding national defense increases system development of distributed simulation system of M&S based to overcome limit of resource and expense. It is one of key technologies for offering of mutual validation among objects and reuse of objects which are discussed for developing these systems. RTI, implementation of HLA interface specification as software providing these technologies uses Federation Object Model for exchanging information with joined federates in the federation and each federate has a characteristic that is supposed to have identical FOM in the federation. This technology is a software which is to provide the core technology which was suggested by the United state's military M&S standard framework. Simulator, virtual simulation, and inter-connection between military weapons system S/W which executes on network which is M&S's core base technology, and it is a technology which also can be used for various inter-connection between S/W such as game and on-line phone. These days although RTI is used in military war game or tactical training unit field, there is none in Korea. Also, it is used in mobile-game, distribution game, net management, robot field, and other civilian field, but the number of examples are so small and informalized. Through this developing project, we developed the core technique and RTI software and provided performance of COTS level to improve communication algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1422-1432
• /
• 2011

Recently, wireless network has been playing an important role in communication system and the applications have become wider with its big technological leap. In defence sector, there are some attempts to use wireless networks to go beyond the wire system. Especially, most internal space of the warships have the wired communication system, which are complicated and inefficient. In this paper, we measure and make a channel model about the internal parts of the warship which contain compartments and corridors including many differences from general indoor environment for establishing wireless networks in warship's internal space. In the unique environment made of metal, we measure 2.4GHz signals using continuous wave(CW) and analysis the environment to present indoor path-loss model for comparing with results from the ray-tracing tool. Moreover, we draw the conclusion that the environment of warships has a wide difference from conventional environments and put the results to practical use in warship's internal space.

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.1-8
• /
• 2019

The electromagnetic forces generate a torque on the gimbal motor, and changes in the coil current causes torque ripple. This affects the gimbals' speed and results to unstable satellite attitude. It is therefore essential to reduce the torque ripple of the gimble motor with the aim of improving the attitude control accuracy of the satellite. This paper theoretically analyzes the torque generated from the modeling of a motor for general concentrated winding and distributed winding. The prototype was designed and fabricated through selection of the winding that reduces the torque ripple through simulation results. The results of the magnetic fields' theoretical analysis and the back electromotive force of the prototype were compared with the calibrated results for verification of conformity and manufacture of the design. The low-speed test proved that the torque ripple is reduced by improving the speed stability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.3
• /
• pp.589-602
• /
• 2024

Thermoelectric generator (TEG) generally do not have high heat conversion efficiencies. The performance of a thermoelectric generator module depends on the shape of the legs as well as the properties of the material and the number of legs. In this study, the leg shapes of thermoelectric elements are modeled into various geometric structures such as cylinder and cube shaped to efficiently harvest waste heat, and the electrical characteristics are compared numerically. The temperature gradient and power generation according to the bridge shape are found to be highest at the existing Cube shape. As a result of comparing the power generation using the cooling effect, the Cone shape was the highest in natural convection and the Hourglass shape was highest in forced convection. Research results confirm that geometry can affect the efficiency of thermoelectric generators.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.566-572
• /
• 2021

A methodology for the identification and coordinates estimation of air cavities under urban ground or sandy soil using its natural poles and natural resonant frequencies is presented. The potential of this methodology was analyzed. Simulation models of PEC (Perfect Electric Conductor)s with various shapes and dimensions were developed using an EM (Electromagnetic) simulator. The Cauchy method was applied to the obtained EM scattering response of various objects from EM simulation models. The natural poles of objects corresponding to its instinct characterization were then extracted. Thus, a library of poles can be generated using their natural poles. The generated library of poles provided the possibility of identifying a target by comparing them with the computed natural poles from a target. The simulation models were made assuming that there is an air cavity under urban ground or sandy soil. The response of the desired target was extracted from the electromagnetic wave scattering data from its simulation model. The coordinates of the target were estimated using the time delay of the impulse response (peak of the impulse response) in the time domain. The MP (Matrix Pencil) method was applied to extract the natural poles of a target. Finally, a 0.2-m-diameter spherical air cavity underground could be estimated by comparing both the pole library of the objects and the calculated natural poles and the natural resonant frequency of the target. The computed location (depth) of a target showed an accuracy of approximately 84 to 93%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.410-417
• /
• 2018

System design errors are more likely to occur in modern systems because of their steadily increasing size and complexity. Failures due to system design errors can cause safety-related accidents in the system, resulting in extensive damage to people and property. Therefore, international standards organizations, such as the U.S. Department of Defense and the International Electrotechnical Commission, have established international safety standards to ensure system safety, and recommend that system design and safety activities should be integrated. Recently, the safety of a system has been verified by modeling through a model-based system design. On the other hand, system design and safety activities have not been integrated because the model for system design and the failure model for safety analysis and verification were developed using different modeling language platforms. Furthermore, studies using UML or SysML-based failure models for deriving safety requirements have shown that these models have limited applicability to safety analysis and verification. To solve this problem, it is essential to extend the existing methods for failure model implementation. First, an improved SysML-based failure model capable of integrating system design and safety verification activities should be produced. Next, this model should help verify whether the safety requirements derived via the failure model are reflected properly in the system design. Therefore, this paper presents the concept and method of developing a SysML-based failure model for an automotive system. In addition, the failure model was simulated to verify the safety of the automotive system. The results show that the improved SysML-based failure model can support the integration of system design and safety verification activities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.268-277
• /
• 2019

Flight test systems should monitor various conditions in real time during flight tests and take safety measures in an emergency. The importance of ensuring test safety increases in more complicated and wider test environments. Also, due to the transition of wartime operational authority, many guided missile systems must be developed simultaneously. Early deployment and budget reduction by shortening the development and T&E periods are also necessary. Consequently, the risk of flight tests under the circumstance of inefficient test resources is increasing. To address this deficiency, a flight test system model using SysML was proposed in this study. The method of designing and verifying the test system is based on the agile shift left testing methodology of advanced T&E labs and utilizing a system reference model in the aerospace field. Through modeling and simulation analysis, early identification and correction of faults resulting from inconsistent test requirements can mitigate the risk of delays during the T&E phase of flight tests. Also, because the flight test system model was constructed using SysML, it can be applied to test various guided missile systems.