• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.3
• /
• pp.127-150
• /
• 2020

A Basic Plan for the Promotion of Space Development (hereinafter referred to as "basic plan"), which prescribes mid- and long-term policy objectives and basic direction-setting on space development every five years, is one of the matters to be deliberated by the National Space Committee. Confirmed February 2018 by the Committee, the 3rd Basic Plan has a unique matter, compared to the 2nd Basic Plan. It is to construct "Korean Positioning System(KPS)". Almost every country in the world including Korea has been relying on GPS. On the occasion of the shooting down of a Korean Air flight 007 by Soviet Russia, GPS Standard Positioning Service has been open to the world. Due to technical errors of GPS or conflict of interests between countries in international relations, however, the above Service can be interrupted at any time. Such cessation might bring extensive damage to the social, economic and security domains of every country. This is why some countries has been constructing an independent global or regional satellite navigation system: EU(Galileo), Russia(Glonass), India(NaVic), Japan(QZSS), and China(Beidou). So does South Korea. Once KPS is built, it is expected to make use of the system in various areas such as transportation, aviation, disaster, construction, defense, ocean, distribution, telecommunication, etc. For this, a pan-governmental governance is needed to be established. And this governance must be based on the law. Korea is richly experienced in developing and operating individually satellite itself, but it has little experience in the simultaneous development and operation of the satellites, ground, and users systems, such as KPS. Therefore we need to review overseas cases, in order to minimize trial and error. U.S. GPS is a classic example.

• Journal of Science Education
• /
• v.32 no.2
• /
• pp.1-16
• /
• 2008

The purpose of this study was to analyze about STS contents in the next generation science textbook for 10th grade according to curriculum revision 2007 and high school science textbooks focused on the Earth Science which were published according to the 7th curriculum. The contents of STS were analyzed by the STS topics of Yager(1989), Piel's standard(1981), and student activities by SATIS. The results of this study are the same as follows: 'The next generation science textbook' was shown that 20.9% is STS material amount in average by Yager's standard. 'High school science textbooks' were shown that 11.3% is STS material amount in average. Based on the STS topics by Yager's standard, most of STS content is focused on 'Relativity with local community', 'Application of science' and 'Cooperative work on real problems'. However, there is rare contents such as 'Multiple dimensions of science', 'Practice with decision-making strategies' and 'Evaluation concerned for getting and using information' in the next generation science textbook. In high school science textbooks were shown that 'Applicability of science' is the highest and 'Relativity with local community' is the next high contents. Based on the STS topics by Piel's standard, most of STS contents are focused on 'Environmental quality', 'Space research' and 'National defence' in the next generation science textbook. But high school science textbooks are focused on 'Natural resources' and 'Technology development'. The activities were analyzed by SATIS student activities. The major categories of activities included in the next generation science textbook were 'Investigation', 'Simulation' and 'Data analysis'. But, there were rare activities like 'Roleplaying', 'Research design' and 'Simulation' in high school science textbooks.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.7
• /
• pp.271-278
• /
• 2021

As the current cyber attacks become more intelligent, the existing Intrusion Detection System is difficult for detecting intelligent attacks that deviate from the existing stored patterns. In an attempt to solve this, a model of a deep learning-based intrusion detection system that analyzes the pattern of intelligent attacks through data learning has emerged. Intrusion detection systems are divided into host-based and network-based depending on the installation location. Unlike network-based intrusion detection systems, host-based intrusion detection systems have the disadvantage of having to observe the inside and outside of the system as a whole. However, it has the advantage of being able to detect intrusions that cannot be detected by a network-based intrusion detection system. Therefore, in this study, we conducted a study on a host-based intrusion detection system. In order to evaluate and improve the performance of the host-based intrusion detection system model, we used the host-based Leipzig Intrusion Detection-Data Set (LID-DS) published in 2018. In the performance evaluation of the model using that data set, in order to confirm the similarity of each data and reconstructed to identify whether it is normal data or abnormal data, 1D vector data is converted to 3D image data. Also, the deep learning model has the drawback of having to re-learn every time a new cyber attack method is seen. In other words, it is not efficient because it takes a long time to learn a large amount of data. To solve this problem, this paper proposes the Siamese Convolutional Neural Network (Siamese-CNN) to use the Few-Shot Learning method that shows excellent performance by learning the little amount of data. Siamese-CNN determines whether the attacks are of the same type by the similarity score of each sample of cyber attacks converted into images. The accuracy was calculated using Few-Shot Learning technique, and the performance of Vanilla Convolutional Neural Network (Vanilla-CNN) and Siamese-CNN was compared to confirm the performance of Siamese-CNN. As a result of measuring Accuracy, Precision, Recall and F1-Score index, it was confirmed that the recall of the Siamese-CNN model proposed in this study was increased by about 6% from the Vanilla-CNN model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.557-564
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast overpressure is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, information and test results related to the blast experiment of internal and external have been limited due to military and national security reasons. Therefore, in this paper, to evaluate blast effect on reinforced have concrete structure and its protective performance, blast tests are carried out with $1.0m{\times}1.0m{\times}150mm$ reinforce concrete slab structure at the Agency for Defence Development. The standoff blast distance is 1.5 m and the preliminary tests consists with TNT 9 lbs and TNT 35 lbs and the main tests used ANFO 35 lbs. It is the first ever blast experiment for nonmilitary purposes domestically. In this paper, based on the basic experiment procedure and measurement details for acquiring structural behavior data, the blast experimental measurement system and procedure are established details. The procedure of blast experiments are based on the established measurement system which consists of sensor, signal conditioner, DAQ system, software. It can be used as basic research references for related research areas, which include protective design and effective behavior measurements of structure under blast loading.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.9-18
• /
• 2024

The importance of active sonar systems is emerging due to the quietness of underwater targets and the increase in ambient noise due to the increase in maritime traffic. However, the low signal-to-noise ratio of the echo signal due to multipath propagation of the signal, various clutter, ambient noise and reverberation makes it difficult to identify underwater targets using active sonar. Attempts have been made to apply data-based methods such as machine learning or deep learning to improve the performance of underwater target recognition systems, but it is difficult to collect enough data for training due to the nature of sonar datasets. Methods based on mathematical modeling have been mainly used to compensate for insufficient active sonar data. However, methodologies based on mathematical modeling have limitations in accurately simulating complex underwater phenomena. Therefore, in this paper, we propose a sonar signal synthesis method based on a deep neural network. In order to apply the neural network model to the field of sonar signal synthesis, the proposed method appropriately corrects the attention-based encoder and decoder to the sonar signal, which is the main module of the Tacotron model mainly used in the field of speech synthesis. It is possible to synthesize a signal more similar to the actual signal by training the proposed model using the dataset collected by arranging a simulated target in an actual marine environment. In order to verify the performance of the proposed method, Perceptual evaluation of audio quality test was conducted and within score difference -2.3 was shown compared to actual signal in a total of four different environments. These results prove that the active sonar signal generated by the proposed method approximates the actual signal.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.1
• /
• pp.287-325
• /
• 2017

Considering the development of aerospace, military science and technology since the 20th century, the sky is very important for the nation's existence and prosperity. The proverb "Whosoever commands the space commands the world itself!" emphasizes the need for the command of the air. This essay is the first study on the status of airspace after reunification. First, the territorial airspace is over the territory and territorial sea, and its horizontal extent is determined by the territorial boundary lines. Acceptance of the present order is most reasonable, rather than attempting to reconfigure through historical truths about border issues, and it could be supported by neighboring countries in the reunification period. For peace in Northeast Asia, the reunified Korea needs to respect the existing border agreement between North Korea and China or Russia. However, the North Korean straight baselines established in the East Sea and the Yellow Sea should be discarded because they are not available under United Nations Convention on the Law of the Sea. It is desirable for the reunified Korea to redefine the straight baselines that comply with international law and determine the territorial waters up to and including the 12-nautical mile outside it. Second, the Flight Information Region (hereinafter "FIR") is a region defined by the International Civil Aviation Organization (hereinafter "ICAO") in order to provide information necessary for the safe and efficient flight of aircraft and the search and rescue of aircraft. At present, Korea is divided into Incheon FIR which is under the jurisdiction of South Korea and Pyongyang FIR which is under the jurisdiction of North Korea. If North Korea can not temporarily exercise control of Pyongyang FIR due to a sudden change of circumstances, it is desirable for South Korea to exercise control of Pyongyang FIR, and if it is unavoidable, ICAO should temporarily exercise it. In reunified Korea, it is desirable to abolish Pyongyang FIR and integrate it into Incheon FIR with the approval of ICAO, considering systematic management and control of FIR, establishment of route, and efficiency of management. Third, the Air Defense Identification Zone (hereinafter "ADIZ") is a zone that requires easy identification, positioning, and control of aircraft for national security purposes, and is set up unilaterally by the country concerned. The US unilaterally established the Korea Air Defense Identification Area (KADIZ) by the Declaration of Commitment on March 22, 1951. The Ministry of Defense proclaimed a new KADIZ which extended to the area including IEODO on December 13, 2013. At present, North Korea's military warning zone is set only at maritime boundaries such as the East Sea and the Yellow Sea. But in view of its lack of function as ADIZ in relations with China and Russia, the reunified Korea has no obligation to succeed it. Since the depth of the Korean peninsula is short, it is necessary to set ADIZ boundary on the outskirts of the territorial airspace to achieve the original purpose of ADIZ. Therefore, KADIZ of the reunified Korea should be newly established by the boundary line that coincides with the Incheon FIR of the reunified Korea. However, if there is no buffer zone overlapping with or adjacent to the ADIZs of neighboring countries, military tensions may rise. Therefore, through bilateral negotiations for peace in Northeast Asia, a buffer zone is established between adjacent ADIZs.

• Journal of Intelligence and Information Systems
• /
• v.25 no.2
• /
• pp.77-97
• /
• 2019

The large amount of data that emerges from the initial connection environment of the Fourth Industrial Revolution is a major factor that distinguishes the Fourth Industrial Revolution from the existing production environment. This environment has two-sided features that allow it to produce data while using it. And the data produced so produces another value. Due to the massive scale of data, future information systems need to process more data in terms of quantities than existing information systems. In addition, in terms of quality, only a large amount of data, Ability is required. In a small-scale information system, it is possible for a person to accurately understand the system and obtain the necessary information, but in a variety of complex systems where it is difficult to understand the system accurately, it becomes increasingly difficult to acquire the desired information. In other words, more accurate processing of large amounts of data has become a basic condition for future information systems. This problem related to the efficient performance of the information system can be solved by building a semantic web which enables various information processing by expressing the collected data as an ontology that can be understood by not only people but also computers. For example, as in most other organizations, IT has been introduced in the military, and most of the work has been done through information systems. Currently, most of the work is done through information systems. As existing systems contain increasingly large amounts of data, efforts are needed to make the system easier to use through its data utilization. An ontology-based system has a large data semantic network through connection with other systems, and has a wide range of databases that can be utilized, and has the advantage of searching more precisely and quickly through relationships between predefined concepts. In this paper, we propose a defense ontology as a method for effective data management and decision support. In order to judge the applicability and effectiveness of the actual system, we reconstructed the existing air force munitions situation management system as an ontology based system. It is a system constructed to strengthen management and control of logistics situation of commanders and practitioners by providing real - time information on maintenance and distribution situation as it becomes difficult to use complicated logistics information system with large amount of data. Although it is a method to take pre-specified necessary information from the existing logistics system and display it as a web page, it is also difficult to confirm this system except for a few specified items in advance, and it is also time-consuming to extend the additional function if necessary And it is a system composed of category type without search function. Therefore, it has a disadvantage that it can be easily utilized only when the system is well known as in the existing system. The ontology-based logistics situation management system is designed to provide the intuitive visualization of the complex information of the existing logistics information system through the ontology. In order to construct the logistics situation management system through the ontology, And the useful functions such as performance - based logistics support contract management and component dictionary are further identified and included in the ontology. In order to confirm whether the constructed ontology can be used for decision support, it is necessary to implement a meaningful analysis function such as calculation of the utilization rate of the aircraft, inquiry about performance-based military contract. Especially, in contrast to building ontology database in ontology study in the past, in this study, time series data which change value according to time such as the state of aircraft by date are constructed by ontology, and through the constructed ontology, It is confirmed that it is possible to calculate the utilization rate based on various criteria as well as the computable utilization rate. In addition, the data related to performance-based logistics contracts introduced as a new maintenance method of aircraft and other munitions can be inquired into various contents, and it is easy to calculate performance indexes used in performance-based logistics contract through reasoning and functions. Of course, we propose a new performance index that complements the limitations of the currently applied performance indicators, and calculate it through the ontology, confirming the possibility of using the constructed ontology. Finally, it is possible to calculate the failure rate or reliability of each component, including MTBF data of the selected fault-tolerant item based on the actual part consumption performance. The reliability of the mission and the reliability of the system are calculated. In order to confirm the usability of the constructed ontology-based logistics situation management system, the proposed system through the Technology Acceptance Model (TAM), which is a representative model for measuring the acceptability of the technology, is more useful and convenient than the existing system.