• Journal of Oral Medicine and Pain
• /
• v.25 no.3
• /
• pp.293-303
• /
• 2000

앵글씨 분류에 따른 최대개구시 하악의 수직 변위에 대한 차이를 확인하고, 수직 하악운동에 영향을 주는 골격요소를 확인하기 위하여, 측두하악관절 및 저작계 이상에 대한 증상 및 병력이 없으며 발치 및 교정치료의 경험이 없는 광주지역 대학에 재학중인 학생들을 대상으로, 앵글씨 구치부 관계에 근거하여 1급군(남:30명, 여:49명), 2급군(남:18명, 여:24명)과 3급군(남:18명, 여:33명)으로 분류하여 총 172명(연령 범주:20-30세)의 학생을 선택하였다. 전남대학교 병원 구강내과에서 사용하는 계측용자를 이용하여 최대 개구시 상하악 중절치 절단면간의 거리를 측정하였다. 대상자들의 진단모형을 만들어 상하악궁 길이와 폭경를 측정하였다. 대상자들에 대한 두부 규격방사선 사진을 촬영, 작도하고 방사선학적 지표를 계측, 비교분석하였다. 앵글씨 분류 1급군, 2급군 그리고 3급군 절치간 최대개구량은 3급군이 가장 컸으며 모든 군에서 남자가 여자보다 컸다. 구치간 최대개구량은 앵글씨 분류 1급군, 2급군 그리고 3급군에서 각 군간의 유의한 차이는 없었으나, 모든 군에서 남자가 더 컸다. 앵글씨 분류 1급군과 2급군의 하악운동에서 총 하악골 길이, 하악지 길이, 하악 하연부 길이 그리고 상악궁 폭경이 변수로 나타났으며, 상하악궁 길이와는 역상관관계를 나타내었다. 앵글씨 분류 3급군의 하악운동에서 상하악궁 길이와 안면 부길이가 1급군과 2급군과는 다른 중요한 변수로 나타났으며, 상악궁의 폭경과는 역상관관계를 나타내었다. 이상의 결과로 보아 앵글씨 분류 각 군에서 하악개구운동은 안면 골격구조의 영향을 받으며, 각 군간에 영향을 주는 안면 골격 요소들은 차이가 있었다. 따라서 이러한 골격적 요소들은 개구량 개선을 위한 진단과 치료시 고려되어야 할 것으로 사료된다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.2
• /
• pp.234-240
• /
• 2022

Floating-Harbor syndrome (FHS) is a rare genetic disorder. This report introduced in a patient with FHS. Distinctive facial characteristics, severe skeletal class 3 malocclusion with underdeveloped maxilla and protruded mandible, congenital missing teeth, microdontia and ectopic positions of maxillary teeth were presented in the patient. In his twin sister, mild skeletal class 3 malocclusion with protruded mandible was observed but congenital missing teeth and microdontia were not observed. High-arched palate, narrow V-shaped maxillary arch compared to wide and ovoid mandibular arch and inverse relationship between the maxillary and mandibular intermolar width resulted in posterior crossbite were confirmed by model analysis of the patient. These were not observed in the twins. Behaviorally, poor cooperation during dental treatment because of mental retardation was observed in the patient.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.174-182
• /
• 2024

In patients with multiple missing molars, wear patterns or displacement of anterior teeth, collapsed occlusal plane, and reduction in vertical dimension may occur. Particularly, in case of a few remaining teeth on one side, a removable partial denture has biomechanical disadvantage. For this reason, an implant-assisted removable partial denture with a few implant surveyed crowns can be an alternative. In this case, due to the right mandibular posterior teeth loss, the anterior teeth were severely worn and the occlusal plane was collapsed. With minimal increasing vertical dimension, oral rehabilitation was performed using a maxillary fixed prosthesis and mandibular implant-assisted removable partial denture. As a result, functional and aesthetic clinical outcomes were obtained.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.18-23
• /
• 2019

Patients with cleft lip and palate have several problems such as oro-nasal communication, dental cross-bite caused by the insufficient growth of maxilla, poor pronunciation and esthetic problem. Removable denture with maxillary double crown near cleft palate and with clasp in the posterior teeth was used to solve the problems of the patient with cleft lip and plate. Double crowns make up for the insufficient mucosal support caused by the mucosa and alveolar bone loss in cleft lip and palate. Double crowns also allow easy repair of denture in case of abutment teeth extraction. In this case, 55-year-old female patient had bilateral cleft lip and palate and few remaining teeth on anterior maxilla. Prosthetic treatment was done for patient with bilateral cleft lip and palate to close oro-nasal communication using maxillary double crown and clasp retained removable denture. As a result, oro-nasal communication was effectively closed and the cross-bite was easily corrected by double crown and clasp retained denture. In addition, pronunciation and appearance were also improved.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.3
• /
• pp.388-393
• /
• 2000

Cleft lip and palate is one of the most common congenital defects in oro-maxillo-facial region. Because most patients undergo surgical repair in early life, the sagittal jaw relationships used to be deteriorated gradually from palate surgery up to adulthood. Also, the maxillary lateral incisor may be absent or atypical-shaped in the cleft site and may not erupt or erupt ectopically, so multidisciplinary dental cares are needed for cleft lip and palate patients. The effects of the cleft lip and alveolus seem to be limited to that part of the dentofacial complex that surrounds the cleft area. In the maxillary arch, the anterior part of the non cleft segment has a tendency to be rotated forward. On the other hand, the cleft segment has a tendency to rotated slightly medially ; hence, the tendency for canines to be edge-to-edge and sometimes in crossbite. Lip and alveolus surgery adequetely correct these problems, with little untoward effect on the skeletal maxillary-mandible relationships. In this report, the patient has a repaired lip and cleft alveolus on the left side with congenital missing on '62, '22, oronasal fistula, and skeletal class III malocclusion which is not affected by lip surgery. Dental treatments for this patient including orthodontic(space supervision, functional regulator in mixed dentition, fixed therapy in permanent dentition) and prosthodontic(removable obturator with key and keyway attachment and Konus crown) therapy were performed to improve the patient's functions and esthetics.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.127-142
• /
• 2000

This study have been carried out to find out the mechnical effect of Multiloop Edgewise Arch Wire(MEAW) making use of the finite element method. The tip back bend of MEAW taken in this analysis is $5^{\circ},\;10{\circ}\;and\;15{\circ}$. In addition, Class II or up & down elastic is applied to find out stress distribution and their values in PDL. A adult male of normal occlusion was selected to create the models of teeth and PDL. And the model of MEAW was also created using commercial finite element code (ANSYS version 5.2). The MEAW is forcibly engaged with a class II or up & down elastic, to determine the initial stress generated in PDL. Comparing the compressive and tensile stress at each reference-planes, following results are obtained. 1. When a MEAW of $5^{\circ},\;10{\circ}\;15{\circ}$ tip back bend was engaged with Class II or up & down elastic, the distribution of compressive, tensile stress in entire PDL is similar in each case. 2. The values of compressive and tensile stress in PDL is higher in $15{\circ}$ tip back bend case than in $10{\circ}\;or\;15{\circ}$ tip back bend case. 3. In the distal PDL of 1st and 2nd molar, compressive stress appears. The compressive area is more wide and its values is higher in PDL of 2nd molar than those in 1st molar. The compressive area and its values become more wide and higher according to the increase of the tip back bend. 4. The values of compressive stress are comparatively smaIIer in PDL of molars than those in premolars. 5. Comparing class II and up & down elastic case, tensile stress values in anterior teeth PDL are smaller md their distribution is more wide in up & down elastic case than class If elastic case. On another hand, there is no difference in distribution and stress values in PDL of posterior teeth between two cases. 6. Comparing the tensile area in PDL of anterior teeth, tensile stress values are maximum in PDL of canine.

• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.549-558
• /
• 2001

This study was undertaken to demonstrate the forces in the maxillary alveolar bone generated by the activation of the maxillary posterior crossbite appliance In the treatment of posterior buccal crossbite caused by buccal ectopic eruption of the maxillary second molar. A photoelastic model was fabricated using a Photoelastic material (PL-3) to simulate alveolar bone and ivory-colored resin teeth. The model was observed throughout the anterior and posterior view in a circular polariscope and recorded photographically before and after activation of the maxillary posterior crossbite appliance. The following conclusions were reached from this investigation : 1. When the traction force was applied on the palatal surface of the second molar, stresses were concentrated at the buccal and palatal root apices and alveolar crest area. The axis of rotation of palatal root was at the root apex and that of the buccal root was at the root li4 area. In this result, palatal tipping and rotating force were generated. 2. When the traction force was applied on the buccal surface of the second molar, more stresses than loading on the palatal surface were observed in the palatal and buccal root apices. Furthermore, the heavier stresses creating an intrusive force and controlled tipping force were recorded below the buccal and palatal root apices below the palatal root surface. In addition, the axis of rotation of palatal root disappeared whereas the rotation axis of the buccal root moved to the root apex from the apical 1/4 area. 3. When the traction force was simultaneously applied on the maxillary right and left second molars, the stress intensity around the maxillary first molar root area was greater than the stress generated by the only buccal traction of the maxillary right or left second molar. As in above mentioned results, we should realize that force application on the palatal surface of second molars with the maxillary posterior crossbite appliance Produced rotation of the second molar and palatal traction, which nay cause occlusal Interference. That is to say, we have to escape the rotation and uncontrolled tipping creating occlusal interference when correcting buccal posterior crossbite. For this purpose, we recommend buccal traction rather than palatal traction force on the second molar.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.672-676
• /
• 2005

To improve the application of polymeric dental restorative composite (PDRC) for the posterior and anterior restoration, silica bridged with siloxane unit was firstly prepared by heat-treating a silica filler at various temperatures. Degree of conversion (DC), depth of cure, and dynamic volumetric polymerization shrinkage values of PDRC filled with silica bridged with siloxane unit were investigated to study the effect of heat-treated silica on the polymerization behavior of PDRC. From the experimental result, it was found that depth of cure was decreased with an increase of heat treatment temperature. on the other hand, both DC and polymerization shrinkage values were uniformly enhanced with increasing the heat treatment temperature. This phenomenon can be explained from the study that showed decrease of average particle size of silica resulted in the increase of relative amount of resin matrix in PDRC.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.16 no.1
• /
• pp.7-17
• /
• 1986

치성종양은 악구강계 영역의 질환 중 중요한 관심거리가 되어왔으며, 이중 상피성 치성종양에 관한 보고는 많으나, 중배엽성 치성종양에 관한 보고는 많이 이루어지지 않았다. 저자는 1975년부터 1985년까지 서울대학교병원 치과진료부에서 방사선학적, 병리학적으로 중배엽성 치성종양인 치성섬유종, 치성점액종, 백악질형성섬유종으로 진단된 증례들을 토대로 하여 연구, 분석한 결과 다음과 같은 결과를 얻었다. 1. 치성섬유종의 연령분포는 32세에서 72세로 광범위 하였으며, 발생위치는 모두 상악구치부이었고, 단방성이 2증례, 다방성이 1증례이었다. 2. 치성점액종의 연령분포는 40세에서 55세로 비교적 중년층에서 호발했고, 4증례가 상악에, 2증례가 하악에 발생하였다. 6증례 모두 방사선학적으로 다방성 방사선투과성을 보였으며, 경계는 비교적 불분명하였다. 3. 백악질형성섬유종은 주로 ?년에서 중년 성인 사이에 많이 발행하였고 40대에 가장 많은 출현율을 보였다. 남녀비는 약 1:2로 여자에게서 빈발하였다. 19증례중 하악에 15증례, 상악에 4증례가 발생하여, 하악이 호발부위였으며, 상하악 소구치, 대구치 부위에 발생하였다. 방사선학적으로 방사선투과성이 2증례, 혼합성이 12증례, 방사선불투과성이 5증례이었다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.81-85
• /
• 2015

This report describes the prosthetic treatment of a patient with multiple missing teeth. Installation of five fixtures on maxilla with sinus lift and six fixtures on mandible with ramal bone graft were performed. With implant supported all-ceramic with zirconia core using CAD/CAM technology and porcelain-fused-to-gold prosthesis, treatment with positive outcome which satisfies both functional and esthetical aspect was obtained.