• Journal of the Mineralogical Society of Korea
• /
• v.32 no.1
• /
• pp.41-49
• /
• 2019

Probing the Na environments in Na silicate and aluminosilicate glasses is essential to the macroscopic properties of melts in the Earth. In particular, exploring the atomic structure of Na silicate and aluminosilicate glasses reveals Na-O distance, which plays an important role in transport properties of melts. Here we report the local environment around Na using $^{23}Na$ magic angle spinning (MAS) NMR. We also obtain $^{23}Na$ isotropic chemical shift (${\delta}_{iso}$) of Na silicate and aluminosilicate glasses with varying composition using Dmfit program. The Q mas 1/2 model simulates the experimental results with three simulated peaks while the CzSimple model simulates with one peak. The ${\delta}_{iso}$ decreases with increasing $SiO_2$ content in Na silicate and aluminosilicate glasses. The ${\delta}_{iso}$ increases with increasing $Na_2O$ content in Na-Ca silicate and Na aluminosilicate glasses when the $SiO_2$ content is fixed. Considering the ${\delta}_{iso}$ of Na aluminosilicate glasses available in the previous studies, together with the current simulation results, we confirm that the ${\delta}_{iso}$ has positive correlation with Al / (Al + Si). Those experimental results were reproduced better using Q mas 1/2 model. The disorder of Na in Na silicate and aluminosilicate glasses can be revealed through the simulation of 1D $^{23}Na$ MAS NMR spectra using Dmfit program in a short time.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.30.1-30.1
• /
• 2018

일제 강점기를 지난 후 광복을 맞았지만, 전란의 폐허 속에 개설된 대학의 천문학과의 관측 시설들은 전문한 상태였다. 필자가 학부 재학 중이던 6-70년대까지도 시 시공(時空)의 흐름은 필요한 것을 직접 만들어 사용할 수밖에 없는 시대로 몰아가고 있었다. 당시를 회고 하며 지금까지 걸어 온 "천문기기 제작 연구의 삶"을 회고하고자 한다. 대학 재학 시절 교수님의 도움으로 막스토브 망원경을 제작하고, 40cm 카세그레인 망원경 등 광학계의 원리와 특성연구를 통해 부품 조립을 수행할 수 있었다. 태양 흑점관측을 위한 10cm 굴절 망원경의 투영시설을 고안하여 6개월 동안 관측하였지만. 석사 논문을 위해 광전측광 관측시스템을 제작하여 식쌍성 관측을 수행하였다. 그 결과 한국의 시설로 UBV 광도곡선 완성하여 1975년 가을 천문학회에서 발표하였다. 1976년 2월 국립천문대 천문계산연구실에 발령 받고 역서편찬 업무를 담당하면서 소백산 60cm 망원경 최종 설치를 끝내고, 천문대(현 역삼동 과총회관 빌딩) 옥상에 2m 규모의 목재 돔을 설계 제작하고 일반인들을 위한 대중천문 활동을 시작하였다. 재직 중에 항상 한국의 열악한 천문시설의 상황을 실감하고 20대를 마감하면서 퇴직하여 "한국천문기기 연구소"라는 명칭으로 천체 돔을 설계하고, 돔 제작기계를 개발하였다. 망원경만 보관 중인 국내 4개 대학에 돔을 납품 한 후 연세대학교 천문대의 직경 6m 스텐레스 돔을 제작하였다. 아울러 연세대 천문대 60cm망원경을 설치하면서 이 곳에 입사하여 관측 장비개발 연구와 관측에 전념하게 되었다. 재직 기간 중 대학의 배려로 카나다 국립천문대(DAO) 방문연구원으로 1.8m 망원경으로 식쌍성들의 분광관측을 수행하여 시선속도곡선을 완성하였고, 체류 중에 스텝들과 국내에서 사용할 60cm용 첨단 분광기를 설계하였으나 대학에 재원이 없어 제작을 못한 아쉬움이 남는다. 1989년 2월 충북대학교 천문우주학과에 부임하면서 열악한 상황이지만 교육과 연구 장비로 20cm와 35cm 소형 망원경의 디지털 광전측광시스템으로 간이 천문대를 설치하여 운영하였다. 학과 설립 10 주년(1998년)을 맞아 40cm 망원경과 6m 돔을 설치하여 교내천문대가 완공되었다. 2000년이 되면서 대중 천문활동 을 위해 이동 천문대를 제작하여 4륜 자동차에 견인하여 여러 지역을 찾아 관측과 강연 활동 등 학과의 대중천문 활동의 특성을 살리는 계기를 만들게 되었다. 학과 설립 20주년(2008년)을 맞으면서 충북 진천에 16개 자동분할 개폐식 스릿의 9m 돔 안에 1m 망원경을 원격관측 시설을 완비하여 대학 본부의 기관으로 충북대학교천문대를 개관하고 관측시설을 완비하였다. 우리의 전통적인 세종시대 천문시설은 당대 최대의 시설이지만 당시 유물들이 모두 소실되어 현존하는 것이 하나도 없음은 실로 아쉬움이 큰 것이었다. 누군가는 그 구조, 형태, 원리, 기능, 사용방법 등을 밝히고 복원을 시도해야 할 시급함이 있었다. 문헌을 통해 1991년부터 학부졸업 논문으로 "고천문 의기(儀器) 복원연구" 분야의 발표를 시작하였다. 그 결과를 통해 세종탄신일에 영릉에서 숭모제 행사 후 그 곳에서 수년간 세종시대 고천문의기 한가지씩 작동모델을 복원하여 제막식을 거행하였다, 유물복원 회사 (주)옛기술과 문화 와 함께 팀을 이루어 매년 제작할 종목을 준비하게 되었다. 간의(簡儀)를 복원한 후에는 일성정시의, 소간의, 앙부일구, 정남일구, 석각천문도, 혼천의, 혼상, 각종 해시계 등 매년 지속적으로 복원되어 큰 규모의 야외 전시장이 완성되었다. 작동모델 설계연구팀의 자문과 제작팀과의 팀웍으로 이룬 성과인 것이다. 한번 시작품이 발표된 모델들은 국내 과학관과 박물관, 천문관에서 후속 모델을 설치하였다. 한국천문연구원과 부산 동래읍성 내에 장영실 과학 동산은 간의와 혼상을 비롯한 각종 해시계들을 설치한 큰 규모의 야외 전시장이다. 조선의 명망 높은 유학자들이 인격적인 하늘을 살펴보았던 혼천의와 일만원권에 그려 있는 국보 230호 자명종 혼천시계(일만원권의 그림)의 작동 모델을 제작하였다. 이와 같은 연구 결과들은 석사과정 박사과정을 통하여 더 심층적인 연구들이 발표되었고, 각종 조선(한국)의 천문의기(天文儀器) 연구 자료들은 연구팀들을 통해 중국과 일본 등 해외에서도 발표되었다. 지금까지 복원된 유물들이 완성되기까지는 참여한 많은 연구원들과 제작팀들이 합심하여 각자의 역할을 수행하여 최종 작동모델들이 하나 둘 완성되는 것이었다. 이것은 참으로 보람된 일이었고, 은퇴 후 지금은 재능기부자로서 즐거운 삶을 이어 갈수 있게 되었다.

• Journal of Korea Water Resources Association
• /
• v.53 no.12
• /
• pp.1159-1172
• /
• 2020

This study applied deep convolution neural network based on U-Net and SegNet using long period weather radar data to very short-term rainfall prediction. And the results were compared and evaluated with the translation model. For training and validation of deep neural network, Mt. Gwanak and Mt. Gwangdeoksan radar data were collected from 2010 to 2016 and converted to a gray-scale image file in an HDF5 format with a 1km spatial resolution. The deep neural network model was trained to predict precipitation after 10 minutes by using the four consecutive radar image data, and the recursive method of repeating forecasts was applied to carry out lead time 60 minutes with the pretrained deep neural network model. To evaluate the performance of deep neural network prediction model, 24 rain cases in 2017 were forecast for rainfall up to 60 minutes in advance. As a result of evaluating the predicted performance by calculating the mean absolute error (MAE) and critical success index (CSI) at the threshold of 0.1, 1, and 5 mm/hr, the deep neural network model showed better performance in the case of rainfall threshold of 0.1, 1 mm/hr in terms of MAE, and showed better performance than the translation model for lead time 50 minutes in terms of CSI. In particular, although the deep neural network prediction model performed generally better than the translation model for weak rainfall of 5 mm/hr or less, the deep neural network prediction model had limitations in predicting distinct precipitation characteristics of high intensity as a result of the evaluation of threshold of 5 mm/hr. The longer lead time, the spatial smoothness increase with lead time thereby reducing the accuracy of rainfall prediction The translation model turned out to be superior in predicting the exceedance of higher intensity thresholds (> 5 mm/hr) because it preserves distinct precipitation characteristics, but the rainfall position tends to shift incorrectly. This study are expected to be helpful for the improvement of radar rainfall prediction model using deep neural networks in the future. In addition, the massive weather radar data established in this study will be provided through open repositories for future use in subsequent studies.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.188-197
• /
• 2020

Termites play an important role as decomposers of the forest ecosystem, while simultaneously causing enormous damage to wooden structures. Currently, two species of subterranean termites have been reported in Korea, and termite damage to historical wooden buildings is occurring nationwide due to climate change, forest fertility, and the locational characteristics of historical wooden buildings. Subterranean termites make their nests underground or inside timber. Termites move underground and access wooden structures through the lower parts of the buildings, adjacent to the ground. Once termites attack the wooden structures, it not only spoils the authenticity of cultural heritage structure, but also hampers structural stability due to the decrease in the strength of the material. Therefore, it is important to prevent termite damage before it occurs. Chemical treatments are mainly used in Korea to control and prevent the damage. In foreign countries, physical barriers are also used to prevent entry to wooden buildings, along with chemical treatments. Physical barriers involve installing nets or particles that termites cannot pass through in the lower part of the building, around the pipes, and between the edges of the building or exterior walls and interior materials. Advantages of a physical barrier are that it is an eco-friendly method, maintains long-term effect after installation, and does not require the use of chemical treatments. Prior to applying physical barriers, studies into the characteristics of termite species must be undertaken. In this study, we evaluated the minimum passage size that each caste of Reticulitermes speratus kyushuensis can move through. We found that workers, soldiers, and secondary reproductive termites were able to pass through diameters of 0.7mm, 0.9mm, and 1.1mm respectively. Head height of termites was an important factor in determining the minimum passing size. Results from the current study will be used as a basis to design the mesh size for physical barriers to prevent damage by termites in historical wooden buildings in Korea.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.3
• /
• pp.231-241
• /
• 2021

This study intended to present strategies and implications for attracting new students and customized education to university officials through research on the participation of workers' academic aspirations in university education. Thus, variables were derived by analyzing prior data, and causal settings between variables and questionnaires were developed. Subject to the survey, 331 workers interested in participating in university education were collected through interpersonal interviews. The collected data were dataized, and reliability and feasibility verification and frequency analysis were conducted. Finally, we validate the fit of the structural equation model and the causal relationship for each concept. Therefore, the results of the validation show the following implications. First, university officials should be motivated by a mentor and mentee system with experienced people who have switched to a suitable vocational group through university education. It will also be necessary to develop and disseminate programs so that they can continue to develop themselves for the future. To this end, it will be necessary to help them understand their aptitude and strengths through consultation with experts. Second, university officials should strengthen public relations so that prospective students can know the cases and information of the job transformation of the admitted workers through recommendations. It will also be necessary to develop university education programs that can self-develop, accept various ideas through "public contest", and provide accurate information about university education to workers through re-processing. Third, university officials should provide workers with a program that allows them to catch two rabbits: job transformation and self-improvement through university education. In other words, it is necessary to stimulate the motivation of workers by providing various information such as visiting advanced overseas companies, obtaining various certificates, moving between departments of blue-collar and white-collar, and transfer opportunities. Fourth, university officials should actively promote university education programs related to this by participating in university education and receiving systematic education and the flow of social environment. Finally, university officials will need to consult and promote workers so that they can self-develop when they participate in college education, and they will have to figure out what they need for self-development through demand surveys and analysis.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.347-355
• /
• 2022

The safety valve (PSV) is a safety device that automatically releases a spring when the pressure generated by various causes reaches the set pressure, and is restored to a normal state when the pressure falls below a certain level. Periodic inspection and monitoring of safety valves are essential so that they can operate normally in abnormal conditions such as pressure rise. However, as the current safety inspection is performed only at a set period, it is difficult to ensure the safety of normal operation. Therefore, evaluation items were developed by finding failure modes and causative factors of safety valves required for safety management. In addition, it is intended to provide decision-making information for securing safety by deriving the priority of items. To this end, a Delphi survey was conducted three times to derive evaluation factors that were judged to be important in relation to the Failure Mode Cause Factor (FMCFs) of the safety valve (PSV) targeting 15 experts. As a result, 6 failure modes of the safety valve and 22 evaluation factors of its sub-factors were selected. In order to analyze the priorities of the evaluation factors selected in this way, the hierarchical structure was schematized, and the hierarchical decision-making method (AHP) was applied to the priority calculation. As a result of the analysis, the failure mode priorities of FMCFs were 'Leakage' (0.226), 'Fail to open' (0.201), 'Fail to relieve req'd capacity' (0.152), 'Open above set pressure' (0.149), 'Spuriously' 'open' (0.146) and 'Stuck open' (0.127) were confirmed in the order. The lower priority of FMCFs is 'PSV component rupture' (0.109), 'Fail to PSV size calculation' (0.068), 'PSV Spring aging' (0.065), 'Erratic opening' (0.059), 'Damage caused by improper installation and handling' (0.058), 'Fail to spring' (0.053), etc. were checked in the order. It is expected that through efficient management of FMCFs that have been prioritized, it will be possible to identify vulnerabilities of safety valves and contribute to improving safety.

• Journal of the Society of Disaster Information
• /
• v.17 no.4
• /
• pp.864-881
• /
• 2021

Purpose: This study aims is to provide a total care solution preventing disaster based on Big Data and AI technology and to service safety considered by individual situations and various risk characteristics. The purpose is to suggest a method that customized comprehensive index services to prevent and respond to safety accidents for calculating the living safety index that quantitatively represent individual safety levels in relation to daily life safety. Method: In this study, we use method of mixing AHP(Analysis Hierarchy Process) and Likert Scale that extracted from consensus formation model of the expert group. We organize evaluation items that can evaluate life safety prevention services into risk indicators, vulnerability indicators, and prevention indicators. And We made up AHP hierarchical structure according to the AHP decision methodology and proposed a method to calculate relative weights between evaluation criteria through pairwise comparison of each level item. In addition, in consideration of the expansion of life safety prevention services in the future, the Likert scale is used instead of the AHP pair comparison and the weights between individual services are calculated. Result: We obtain result that is weights for life safety prevention services and reflected them in the individual risk index calculated through the artificial intelligence prediction model of life safety prevention services, so the comprehensive index was calculated. Conclusion: In order to apply the implemented model, a test environment consisting of a life safety prevention service app and platform was built, and the efficacy of the function was evaluated based on the user scenario. Through this, the life safety index presented in this study was confirmed to support the golden time for diagnosis, response and prevention of safety risks by comprehensively indication the user's current safety level.

• Journal of Environmental Impact Assessment
• /
• v.32 no.1
• /
• pp.1-14
• /
• 2023

When carrying out development projects around Ardeidae breeding habitats, we intend to devise a plan for sustainable coexistence by presenting measures to select and reduce key evaluation items so that conflicts can be prevented in advance at the environmental impact assessment stage. The results of the study are as follows. The main evaluation items are animal and plant items for preservation of Ardeidae breeding habitats and odor and noise items that can evaluate the effects of odors and noise in Ardeidae breeding habitats. First, the scope of the survey in animals and plants categories is not limited to legal guardian species, but includes egrets breeding and feeding grounds corresponding to major species breeding grounds and migratory birds, and preservation measures are established according to the reduction of the area of breeding and feeding grounds. Second, in the odor category, the irradiation period includes the period when the odor generation is the highest from the end of June to the end of July. The odor evaluation standard is based on the complex odor discharge standard, which is a concentration regulation, and the odor concentration felt by humans shall be 2 to 5OU/m³ and the frequency shall be 2% or less. Third, in the noise category, the timing of the survey is measured every month from May to August, including when the sound of egrets and young birds is combined to maximize noise generation. Since the noise of Ardeidae, a bird in summer, occurs only for a certain period of time, measures are taken to reduce noise by securing separation distances, securing buffer green areas, and installing construction rather than installing artificial structures such as soundproof walls. In order for existing Ardeidae breeding sites to maintain an appropriate density of populations and not move populations elsewhere, it is necessary to manage nesting tree and maintain stable habitat quantity and quality.

• Korean Journal of Culture and Social Issue
• /
• v.22 no.4
• /
• pp.595-622
• /
• 2016

This study aims to understand the process of family reunion of the ex-offenders. To this end, Korea Rehabilitation Agency under Ministry of Justice and Healthy Family Support Center conducted intensive interviews with ex-offenders, their families and with 8 counselors who are in charge of ex-offenders and their families' residential, psychological, and educational support. The data collected through the interviews were analyzed by Consensus Qualitative Research(COR). The followings are the results: the counselors found out that most of ex-offenders had experienced unhappy childhood which was lack of healthy relationship with their parents. Secondly, counselors noticed a common feature among the families of ex-offenders. The common feature was that they keep the fact that one of their parents was imprisoned to their children as a secret. Thirdly, through the data analysis, counselors could understand various factors that affect reunion of ex-offenders' families: the factors that helped successful reunion were ex-offenders' sense of responsibility, open and healthy communication among family members, and mutual understanding of being a good family member, whereas, irresponsible dependance to other family members, denier and avoidance from the family members against ex-offenders, and lost sense of being a family member were the factors that discouraged the reunion. It turned out that the kinds of crime that ex-offenders committed also affected family reunion. The processes of reunion were easier for those who served their time with fraud, embezzlement, whereas, it was much more challenging for those who served their time with rape, violence, or murder. Fourthly, counselors learned that "relaxation" is the key factor in the process of reunion of ex-offenders' families. They also emphasized that there should be thorough monitoring process before the intervention in the reunion process. This study contributes in terms of finding healthy ways of intervention with ex-offenders' families and developing programs that help ex-offenders to recover their relationship with their family.

• The Journal of Engineering Geology
• /
• v.32 no.1
• /
• pp.113-126
• /
• 2022

The tectonic history of the Chukchi Abyssal Plain in the Amerasia Basin, Arctic Ocean, has not been fully explored due to the harsh conditions of sea ice preventing detailed observation. Existing models of the tectonic history of the region provide contrasting interpretation of the timing of formation of the crust (Mesozoic to Cenozoic), crust type (from hyper-extended continental crust to oceanic crust), and formation process (from parallel/fan-shaped rifting to transformation faulting). To help determine the age of the oceanic crust, the geothermal gradient was measured at three stations in the south of abyssal plain at depth of 2,160-2,250 m below sea level. Heat flow measurement stations were located perpendicular to the spreading axis over a 40 km-long transect. In-situ thermal conductivity measurement, corrected by the laboratory test, gave observed marine heat flows of 55 to 61 mW/m². All measurements were taken during Arctic expeditions in 2018 (ARA09C expedition) and 2021 (ARA12C expedition) by the Korean ice-breaking research vessel (IBRV) Araon. Given the assumption of oceanic crust, the results correspond to formation in the Late Cretaceous (Mesozoic). The inferred age supports the hypothesis of formation activated by the opening of the Makarov Basin during the Late Mesozoic-Cenozoic. This would make it contemporaneous with rifting of the Chukchi Border Land immediately east of the abyssal plain. The heat flow data indicate the base of the gas hydrate stability zone is located 332-367 m below the seafloor, this will help to identify the gas hydrate-related bottom simulating reflector in the future seismic survey, as already identified on the Chukchi Plateau. Further geophysical surveys, including heat flow measurements, are required to increase our understanding of the formation process and thermal mantle structure of the abyssal plain.